NAT TYPE

[kerim6155]

My NAT type is strict. Is there a guide to change it?

[Icetea]

1. Open your browser, type the Gateway IP address in your address bar and press "Enter" to open your router's configuration page.
2. Enter your router password. If you don't know the password, you may need to contact the manufacturer. However, for many devices, the default password is "admin."
3. Click the "Administration" link on your router. Change the "UPnP" setting from "Disabled" to "Enabled."
4. Click the "Save Settings" or "Save Changes" button at the bottom of the page. Exit your router configuration tool.

I hope this tutorial helps at least a little bit.

Regards,
Icetea

[kerim6155]

Originally Posted by Icetea

1. Open your browser, type the Gateway IP address in your address bar and press "Enter" to open your router's configuration page.
2. Enter your router password. If you don't know the password, you may need to contact the manufacturer. However, for many devices, the default password is "admin."
3. Click the "Administration" link on your router. Change the "UPnP" setting from "Disabled" to "Enabled."
4. Click the "Save Settings" or "Save Changes" button at the bottom of the page. Exit your router configuration tool.

I hope this tutorial helps at least a little bit.

Regards,
Icetea

nope it was already enabled

[Icetea]

Originally Posted by kerim6155

nope it was already enabled

What's about the ports? Give us some more hints.

• 

Regards,
Icetea

[Exodiasgodwz]

All i did was reset my router / modem and it goes to moderate / low

[kerim6155]

Originally Posted by Icetea

What's about the ports? Give us some more hints.

• 

Regards,
Icetea

When i try to port forward i get this screen.

I dont know how to do the ports from the link you send.

[Icetea]

Originally Posted by kerim6155

When i try to port forward i get this screen.

I dont know how to do the ports from the link you send.

I think that there are several YouTube tutorials, which it is explained in more detail.

Regards,
Icetea

[0x41^4]

Originally Posted by kerim6155

When i try to port forward i get this screen.

I dont know how to do the ports from the link you send.

Google the router you have followed by “change ports”
Then find the ports for the game you need, also on google.

[kerim6155]

Originally Posted by -0x41^4-

Google the router you have followed by “change ports”
Then find the ports for the game you need, also on google.

fixed it my router portforwarding did weird ****..

[0x41^4]

Originally Posted by kerim6155

fixed it my router portforwarding did weird ****..

Mine typically do too.
Opening ports is usually the first thing I do when I get a new one for that reason, lol.

[DarkOPM]

#moved