[Collection Thread] Bot Support Thread

[slwester23]

Bot:Cube bot
Version:1.47
Problem:trapdoor fatal error (program croupted or missing libraries)

[aleni150967]

Bot:Cube bot
Version:1.47
Problem:trapdoor fatal error (program croupted or missing libraries)

helpp

[sniffy456]

Bot: Glitterbot
Version: V8 V9.1
Problem: Der Bot sammelt nur für eine kurze Zeit dann klickt er wie wild nur noch auf Minimap rum und dann wieder zum Schiff er fährt also nicht weiter das andere Glitzies auftauchen und so loggt er sich irgendwann aus. Ein weiteres Problem ist das der Bot ständig unten auf die Uhr bzw Internetzugriff etc klickt.
Jemand ne Lösung?

[vicki424]

Bot: Everyday I'm Botting!
Version: 1.4
Problem: It can' find the minimap, or the hp bar or the attack or repair buttons and when I define these things manually it starts but clicks at randomly on the screen (not even on he sea chart. just clicks anywhere on the screen)
(When does this problem appeared the first time: ) It first appeared when I tried to use the bot on my new computer which has a resolution of 1920*1080p and my settings are correct as shown in the thread for the bot. but the 800*600 resolution is much smaller on this computer than my older computer which had a resolution of 1366*768

[trolleras9]

Originally Posted by vicki424

Bot: Everyday I'm Botting!
Version: 1.4
Problem: It can' find the minimap, or the hp bar or the attack or repair buttons and when I define these things manually it starts but clicks at randomly on the screen (not even on he sea chart. just clicks anywhere on the screen)
(When does this problem appeared the first time: ) It first appeared when I tried to use the bot on my new computer which has a resolution of 1920*1080p and my settings are correct as shown in the thread for the bot. but the 800*600 resolution is much smaller on this computer than my older computer which had a resolution of 1366*768

Well, because of that fluent use of the forum by your side, i'll try to help you out my non-spammer friend.
Any pictures, debug messages?
Is your color quality set to 32 bit?

[vicki424]

Originally Posted by trolleras9

Well, because of that fluent use of the forum by your side, i'll try to help you out my non-spammer friend.
Any pictures, debug messages?
Is your color quality set to 32 bit?

Color quality set to 32-bit? I'm not sure how to do that.

Fiddler won't even work for the custom client any more, it worked fine yesterday and loaded the custom client, now it just stops at 6%. shows in this image :

From the image you can see that on 800x600 the sea chart is fairly small and when the bot was running yesterday it used to click outside the sea chart to move around and couldn't even click on the minimap properly because it was too small. (I used manual define for the sea chart and mini map). client in this image :

Thank you

[xloranera]

hi,
i've 2 kind of problem with CUbebot and Bluedra never help me, hope someone will.
1)when i start the PC my cubebot changes HID so it give to me "You don't have a valid license", I can't spend my whole free time to restart PC and hope to obtain the correct HID (1 on 20 time)
2)When I haven't the problem of HID change I have the problem of infinite Upgrade to 1.47 version. I can't stop it and Can't use the bot.

This is the second chance that I gave to CUBEBOT (Yes I'm Stupid), but the worst thing is the complete lack of support from bluedra.
Please help me boys
Thanks to all

[spac4299]

I've got a problem with scar divi 3.22, when i start a script and switch to the map, nothing happens, what can I do?Am I doing something wrong?
Please help me.
Thx

[trolleras9]

Originally Posted by vicki424

Color quality set to 32-bit? I'm not sure how to do that.

Fiddler won't even work for the custom client any more, it worked fine yesterday and loaded the custom client, now it just stops at 6%. shows in this image :

From the image you can see that on 800x600 the sea chart is fairly small and when the bot was running yesterday it used to click outside the sea chart to move around and couldn't even click on the minimap properly because it was too small. (I used manual define for the sea chart and mini map). client in this image :

Thank you

1)To change your color quality you go to desktop, right click, properties, settings and set color quality to 32bit(For Xp). To change it on win7 or higher you must access your gpu's software. However 32bit quality is set by default so i dont think this is your problem.
2)Custom Client works only on 800x600 res, else you'll get init mapmouse control and get stuck there.
3)Erm.. the photo you uploaded is in normal client. You know that you need custom client right?
When defining positions, you must choose the seachart in a slightly smaller box(Add 10 on scx1 and scy1 and subtract 10 from scx2 and scy2). Do the same with minimap(if having problems with it) but only 2-3 this time.

Originally Posted by xloranera

hi,
i've 2 kind of problem with CUbebot and Bluedra never help me, hope someone will.
1)when i start the PC my cubebot changes HID so it give to me "You don't have a valid license", I can't spend my whole free time to restart PC and hope to obtain the correct HID (1 on 20 time)
2)When I haven't the problem of HID change I have the problem of infinite Upgrade to 1.47 version. I can't stop it and Can't use the bot.

This is the second chance that I gave to CUBEBOT (Yes I'm Stupid), but the worst thing is the complete lack of support from bluedra.
Please help me boys
Thanks to all

Im sorry but your only help is bluedra or other co-coders that work with him

Originally Posted by spac4299

I've got a problem with scar divi 3.22, when i start a script and switch to the map, nothing happens, what can I do?Am I doing something wrong?
Please help me.
Thx

What error do you get in the debug box? Would be better to give more info, like which bot for example

[spac4299]

The problem is not the bot, it's Scar, as you may have seen it says it started and ended but it really hasn't done anything...

[trolleras9]

Originally Posted by spac4299

The problem is not the bot, it's Scar, as you may have seen it says it started and ended but it really hasn't done anything...

when you start it wait 5 seconds

[spac4299]

Originally Posted by trolleras9

when you start it wait 5 seconds

I've waited hours...

[trolleras9]

Originally Posted by spac4299

I've waited hours...

from what i see it is version 2. So it may have a bug or something. Go and download latest version

[spac4299]

This is the newest, and it doesn't work, as said, it's not the script, it's the program...

[vicki424]

Originally Posted by trolleras9

1)To change your color quality you go to desktop, right click, properties, settings and set color quality to 32bit(For Xp). To change it on win7 or higher you must access your gpu's software. However 32bit quality is set by default so i dont think this is your problem.
2)Custom Client works only on 800x600 res, else you'll get init mapmouse control and get stuck there.
3)Erm.. the photo you uploaded is in normal client. You know that you need custom client right?
When defining positions, you must choose the seachart in a slightly smaller box(Add 10 on scx1 and scy1 and subtract 10 from scx2 and scy2). Do the same with minimap(if having problems with it) but only 2-3 this time.

My settings got changed to 640x480, but I changed it back to 800x600 to work with custom client.

Sorry about that I uploaded the wrong photo, here's the correct one with custom client. I'm using 800x600 :

And this is the debug messages I have on the script, which is set to 1 for shiney hunt, I also had to auto define everything.

It just keeps clicking at the corners, it also can't find hp for some reason so I have to auto define