Smurfin's tutorial for Smurf IT and or bot

[themetalic]

i want the link for download it plisss

[Razyplotnitel]

Can you help me?
How i must set SmurfIt bot, that he will help with attack to paty leader? not baff, not nurse, only help me attack mobs?

[Smurfin]

you must set [leader] as in Smurf IT! , not related to party leader in the game, but you can set the [leader] in Smurf IT! to the same char you have as party leader in the game, then go to [attackassist] tab, select which char will help attack, save, and go to [main] again, tick [v] AutoAim Ldr's target.

Now your other char will lock on the same target as your (party) leader. Use attacking using bot app you like, or you can use Smurf IT!'s RapidKeySend to attack, set Sendkey as 123456 to use multiskills which you must set in the game before that.

[xball3rz]

1

Originally Posted by Smurfin

- Download it from Zevorc's Thread
- Extract to any folder, and get the correct setting for your PW server, easiest is using ntKid's MHS Retriever, get it
- MHS Offset Retriever will generate Custom_OffSets.ini file, put it into Zpw bot's extraction folder.
- Run the bot, go to monster tab, check [Filter Settings] as follow :
*Min Level= minimal level of mobs around to be killed,
*Max Level=maximal level of mobs around to be killed,
*Min/Max vertical height= the vertical height above or below your char position, so if a flying mob is above you and you set max vertical height like 70, your char will target that flying mob, leave it at -5 and 5 unless you bot at an area with different terrains heights around.
*Max Dist = Radius from Base coordinate, only mobs within this range radius will be targetted. So your char will not wander off too far.
*static dist filter, if unticked, this will set your char position as the base coordinate and your char might wander off around large area.
*SET COORD before you begin botting to use as BASE
- [setting] tab is for....well, setting, use autoloot, set the key and how many times, I usually set it to 10. Then tick [stop when death]. Use Autobuffs, then set AutoSkills.

(*)it requires that you click save after making any changes to setting once you began botting. for example you can change max distance on the go but you have to click save before that. Set Coord also works realtime. If you change setting and it doesnt have any effect, just klik stop and start again, or just re-run the bot app.

from this image, assuming that ellips is 5 m radius, mobs outside that ellips will not be targetted.

[Razyplotnitel]

Originally Posted by Smurfin

you must set [leader] as in Smurf IT! , not related to party leader in the game, but you can set the [leader] in Smurf IT! to the same char you have as party leader in the game, then go to [attackassist] tab, select which char will help attack, save, and go to [main] again, tick [v] AutoAim Ldr's target.

Now your other char will lock on the same target as your (party) leader. Use attacking using bot app you like, or you can use Smurf IT!'s RapidKeySend to attack, set Sendkey as 123456 to use multiskills which you must set in the game before that.

I've done everything as you said, step by step, but it does not work! Second char stay on the same place all the time, using RapidKeySend to attack don't work too. Steel need your help. Offset.ini is correct, using smurfit1.72(reloaded)

[Smurfin]

how is the target on your second char, it should lock on the same target as the leader.

RapidKeySend is a macro for sending keypress of a keyboard key(s), if the inputbox is filled with 123456, it will randomly send keypress 1 or 2 or 3 or 4 or 5 or 6, depending what key will enter the queue for skill in the game.

So if your second char has a target (should be the same as leader's) and the script keep sending keys 123456, your second char should begin attacking, as long as you put attack skills in the game for those hotkeys.

[Razyplotnitel]

Just checked, target of the second char is the same as in party leader window. When i point on any mob in PL window, target changes in 2nd char window too. Also thk you for RapidKeySend use deskription, but i don't want to use it, i need auto attack start working. In [settings] tab [char id] is set and saived correct to each window.

Maybe the problem in window resilution? i use 640*480 windowed mode for both chars, i didn't cheсk it.?

[Razyplotnitel]

Originally Posted by rachtak

Hi,
I've tried with little success on getting two bots runing in unison. I have a blade master (which I intend to use for attacking, taking hits) and an Archer (doing damage once the BM starts tanking). Using Smurfit, I have made two separate PW windows where I run zPW on each seperately. However since i'm fairly new, im not entirely sure im doing this right. I have all my offsets right, set leader in Smurf, Enabled Leaderassist, and disabled autotarget for the ranger but it doesnt seem to be working. All I get is Smurf crashing with an error about "array varibles"...
Maybe im missing something... Can someone please give me detailed step by step instructions?

I found almost the same question on page 17 of this forum, but don't found the ansver on it. The only difference in my case, i want use party leader on zpw 1.26 bot or by my own hands, and the second char using SmurfIt AttackAssist. I use 2 druids chars. Help please to set SmurfIt correct.

[Smurfin]

then autoaim is working correctly, only need auto attack which smurfit doesn't have, but can be handled by RapidKeySend. Or you can use MHS bot without moblist for autoattack.

I usually use mhs/zpw without moblist/disable autotargetting for the other chars' autoattack when botting, only the leader use moblist/autotargetting , but for killing mobs manually I usually use RapidKeySend

it doesn't relate to resolution for the client.

-edit-
Smurfit only help passing the mob id which is targetted by leader to other chars, but for the autoattack, you still have to run another instance of whatever bot app you use or simply use rapidkeysend.

[Ghostlamer]

Hi Smurfin.
I download your new version 1.8.
Then i run it, configure it for two PW windows(1024x768).
Works very good for first run(ifollow, ibuff), then i close Smurf IT and rerun, after this it not work anymore...
If delete SmurfIT.ini, then run again and configure as first time, it works again, but when rerun program with created ini file(when i configured for first time), it runs but hotkeys,char commands and other stuff not work..
The same thing happens with ver 1.7.

Added:
I understand.
I must at first time rerun pw client, only after rerun Smurf IT.
Otherwise will not work.

[Smurfin]

did you change the hotkeys ? if you changed them, make sure you don't have other application using the same hotkeys.

If not, compare the default ini file with the one you make changes and see the difference

[Ghostlamer]

I solve the problem, i need just rerun pw client before rerun Smurf IT.
Smurfin, thanks for this product...

[dirtyzerg]

Error i get for anything i try to do is "Error: Subscript used with non-array variable"

:S no matter what hotkey i press this happens

[linring]

kk smurfin,, ini gw daghh ikutin langkah2 nya tapi kok nggak jln yaghh
"error no souronding monster"

[legendaryhero7]

Hey there Smurfin,
Just a quick question for ya...once in a while the auto pet healer doesn't work right. It has the right pet HP and all, but when u turn it on it just keeps healing (neverending) So I'm just wondering if there is a way to make it stop or to fix it somehow... Thanks in advance