Tap Titans 2 Advanced ClickBot (HiroMacro)

[indomix]

I've tested 1.1 version for 10 hours with autoprestige and clan quest and all is ok. Thx for this more stable build.

@, I already recorded video with installation guide in Russian, but I added subtitles and translate it into English. U can add this link in first post if u want, it would be helpful for other peoples.

[Whyno]

Originally Posted by indomix

I've tested 1.1 version for 10 hours with autoprestige and clan quest and all is ok. Thx for this more stable build.

@, I already recorded video with installation guide in Russian, but I added subtitles and translate it into English. U can add this link in first post if u want, it would be helpful for other peoples.

Thanks nice tutorial, you can add my github link (no login on epvp for the current version required) and also more up to date - .

[indomix]

Originally Posted by Zorn15

Hey Yes I opened it in the correct resolution...

Originally Posted by Whyno

Thanks nice tutorial, you can add my github link (no login on epvp for the current version required) and also more up to date - .

I got it

[Whyno]

New release state

Stable v1.1 (19.04.2017)

• Optimized clan quest for top tournaments (still not perfect)

[crash_501]

Thoughts and questions from a new user.

I'm at IP14 and splash x4 all the way to 3500 so I may be a bit of an outlier here, but I'm basically looking to fire and forget this thing to farm relics and CQ as my interest in the game is dwindling.

Is there a way to have the script change between buy max, down to buy x10? After a prestige I'm around stage 1800 and going through x10 at a time is pretty time consuming, but I'd like to be able to switch to x10 on my final hero upgrade as the cost gets exorbitantly high.

How does the script decide when to upgrade heroes? It seems to go through cycles of upgrading and then just click attacking for a long time. Normal? I used to have a macro in Nox set to click the titan for 20-30 clicks, single click my highest hero to upgrade and repeat.

I tried the CQ setting with 3 attacks per CQ. It did the first free one and then never progressed to the second (5 gem) attack. There was a stage transition at almost the same time. Bug with the CQ repeat or maybe the stage transition messed it up?

I don't need to use any skills to x4 splash to 14, don't need any special clicks for a boss fight, I'm just looking to upgrade heroes to current max available, click a bunch, repeat until 3500. Any suggestions for optimal setup?

I'm going to let it run while I sleep and see how far it gets in the 6 hours until my next CQ.

Thank you for all the hard work on this, it's way beyond my meager scripting skills I managed to play around with in Nox and very impressive how much the script is able to do within the limits of it's detection abilities.

[Maltram]

Originally Posted by crash_501

Thoughts and questions from a new user.

I'm at IP14 and splash x4 all the way to 3500 so I may be a bit of an outlier here, but I'm basically looking to fire and forget this thing to farm relics and CQ as my interest in the game is dwindling.

Is there a way to have the script change between buy max, down to buy x10? After a prestige I'm around stage 1800 and going through x10 at a time is pretty time consuming, but I'd like to be able to switch to x10 on my final hero upgrade as the cost gets exorbitantly high.

How does the script decide when to upgrade heroes? It seems to go through cycles of upgrading and then just click attacking for a long time. Normal? I used to have a macro in Nox set to click the titan for 20-30 clicks, single click my highest hero to upgrade and repeat.

I tried the CQ setting with 3 attacks per CQ. It did the first free one and then never progressed to the second (5 gem) attack. There was a stage transition at almost the same time. Bug with the CQ repeat or maybe the stage transition messed it up?

I don't need to use any skills to x4 splash to 14, don't need any special clicks for a boss fight, I'm just looking to upgrade heroes to current max available, click a bunch, repeat until 3500. Any suggestions for optimal setup?

I'm going to let it run while I sleep and see how far it gets in the 6 hours until my next CQ.

Thank you for all the hard work on this, it's way beyond my meager scripting skills I managed to play around with in Nox and very impressive how much the script is able to do within the limits of it's detection abilities.

There is no way to switch between x100 and x10 (for now) but it shouldn't be necessary. I splash 4x through, too and x100 is enough. Can you evolve your last hero a second time?
Skills are not necessary but make it faster. You can disable them by setting the parameter "enableSkills" to 0.
You can change the interval in which the bot skills the heros by setting the runActionsEveryXMinutes parameter to the desired amount of minutes. This is the same interval it uses to check for clan-quests, so if you are in clan which requires you to beat the boss in the first 2-3 minutes you should lower the time accordingly.

The CQ-feature is still somehow shaky, it's not working for me either. Just give it some time

[crash_501]

Left it running 6 hours until my next CQ popped and happy to report it appears to have run flawlessly. Had it set to prestige every 90 minutes (will have to observe while awake to see a better estimate of how long it takes to hit 3500) and I was 4-5 prestiges worth of relics higher.

Originally Posted by Maltram

There is no way to switch between x100 and x10 (for now) but it shouldn't be necessary. I splash 4x through, too and x100 is enough. Can you evolve your last hero a second time?
Skills are not necessary but make it faster. You can disable them by setting the parameter "enableSkills" to 0.
You can change the interval in which the bot skills the heros by setting the runActionsEveryXMinutes parameter to the desired amount of minutes. This is the same interval it uses to check for clan-quests, so if you are in clan which requires you to beat the boss in the first 2-3 minutes you should lower the time accordingly.

The CQ-feature is still somehow shaky, it's not working for me either. Just give it some time

Our CQ is down in 2-3 min so thanks for pointing me to the right variable there. Definitely need it to see that it's up asap.

[Whyno]

Originally Posted by Maltram

This is the same interval it uses to check for clan-quests

I separated the clan quest interval in v1.1, max possible delay should be 10-15 seconds. Script works perfect without fade screens atm, I try to fix this with the next update.

[Omskkun]

Hello, WhyNo, I've been playing TT2 for a while with HiroMacros script that only taps that i wrote myself and noticed that there is a fully functionally bot that you wrote. Since i can't use Nox constantly because of work reasons and there are many requests for this feature, i wanted to make a fork or even a separated branch if you allow this of your project on GitHub and rewrite it for 1920x1080, test it on the phone and possibly make it updatable with your versions, only changing tap coordinates if necessary. Can i have your permission to do it?

[indomix]

@, I'm not a WhyNo, but I think that GitHub is made basically for this stuff U can make changes without problems, just fork it.

[ericrootbeer]

sometimes it doesn't do the clan quest when it's up, any reason why?

[Whyno]

Originally Posted by ericrootbeer

sometimes it doesn't do the clan quest when it's up, any reason why?

Can you update your script to 1.2 and test that again?

[ericrootbeer]

Originally Posted by Whyno

Can you update your script to 1.2 and test that again?

i'll try it and let you know, thanks!

[ericrootbeer]

Originally Posted by Whyno

Can you update your script to 1.2 and test that again?

I think I found out the issue with the script. When a clan message is sent, the script doesn't detect the colors of the clan battle so it doesn't click it.

[marcel342]

Hey Whyno, there is some kind of bug in your script. At some point the script stops completly. After using the volume down button, it's starts again. And it doesn't buy all skills, even if they are available.

Got someone a nice working script for perma skills and CQ? I'm already on stage 3.5