WPE Stage Skipping Tutorial!!!

[jamwan]

Elsword Stage Skipping


If your Elsword version already has Ereda This won't work


Before doing anything that is written below be sure that you already have the necessary tools to use WPE

Procedure:

1) Enter the desired dungeon

2) Once you reach the stage near the second to the last stage before destroying the door start scanning.
Please refer to the image below:

 Spoiler

Further explanation on my post here:

3) after destroying the door and the second to the last stage is loaded stop scanning and proceed to finishing the dungeon.
Note: Don't Stop scanning until you see your character and you can already move.


4) Re-enter the dungeon and check the packets you saved from earlier

5) look for a value higher than 100(i got values of 570 and 1998 sometime ago) after finding the values proceed to testing each one

6)Test packets at the very bottom of the list first to avoid errors. Once you find the correct value the screen will black out and you will be sent to the second to the last stage of the dungeon clear it and proceed to next stage where the boss is waiting.
----Note: mobs on the second to the last stage are not registered you won't be wasting stamina by killing them nor will they give you drop whatsoever.

7) kill the boss, rinse repeat to get that reaper title(in HoB of course see image below for reference)

Video Tutorial

 Spoiler

If Everything Goes Well, something like this should happen...

 Spoiler

PS: be sure not to double send the packet otherwise you will get stuck where you will need to exit the dungeon since it wont auto exit even after you kill the mobs or destroy the door. After you kill the boss re-enter the dungeon and use the packet you got earlier.

Other info

 Spoiler

Confirmed it works on the reaper title

 Spoiler

(right click open new image in new tab to see clearly)

[TIPS]
Henir Fast run under 1 minute(60 fragments only)

 Spoiler

Steps
1) Play your first run of Henir As usual
2) After reaching Karis(first form) defeat her and start scanning.
3) Stop scanning after the HoB Stage(karis second form) is loaded, Finish Henir
4) Enter Henir again
5) Search for the highest Packet size in the filtered packets.
6) If you are sent to the HoB Stage then you are done if not try using other packets.

Images

 Spoiler

* You can also do this to finish the HA skill quest faster.
* NEVER EVER USE THIS IN CHALLENGE MODE or be hit by the BAN hammer
*Confirmed you can use this in henir challenge mode since you will only be included in the ranking if you finish all 31 stages since you will be skipping to HoB stage that would make it only 3 stages so you should be safe nor will your name come out saying you finished henir challenge mode.

SD Always get Luto mode Stages(even when solo)

 Spoiler

Steps
1) Enter any SD dungeon Hell mode
2) Pray that Luto Appears somewhere along the way
3) before destroying Luto's door start scanning
4) Once the Luto stage is loaded stop scanning then finish the SD dungeon
5) Enter the SAME SD dungeon search for the highest packet size then send it
6) if you are transported to a red background stage then you are now in luto mode, if not try other packets until you get the right one

*To maximize your farming clear the SD stages(none luto) before the boss stage then send the packet that send you to luto mode this way you can get the loots from the none Luto SD dungeon and the Loot in the LUTO SD dungeon.

*Note I'm not sure why but i get DCed each time i do this(my net really sucks)

Theory
TWO SD BOSSES(unconfirmed my internet sucks so hard i got DCed before even trying this.)
If the boss in Luto mode and Non Luto mode are seperate it is possible to fight both of them, all you need to do is kill the boss then right before the posing scene send the packet that send you to luto mode. I never got to mess with the SD stage files when kom editing was still possible so im not sure if the bosses are seperate if they are or aren't please tell me ^_^.

Credits to the People responsible for the instruction on how to use WPE.

If this thread is anyway game breaking or is already a duplicate of another thread please do tell me.

[omieqqe]

Interessting, i can't invest more time in MMORPGs since i start my job.
Thank you for this, it will help me a lot.

[MFA001]

nice thanks for the tutor, going to try now ^_^

*Edit not working, just black screen..

[jamwan]

Originally Posted by MFA001

nice thanks for the tutor, going to try now ^_^

*Edit not working, just black screen..

You should only start scanning before destroying the door, the packet you need is most likely the one with the highest value that was sent by(source)IP+socket 8080, the value for changing stages probably doesn't have a definite value since i never got the same value whenever i retry or try different dungeons, you only need to send the packet once.

[MFA001]

Originally Posted by jamwan

You should only start scanning before destroying the door, the packet you need is most likely the one with the highest value that was sent by(source)IP+socket 8080, the value for changing stages probably doesn't have a definite value since i never got the same value whenever i retry or try different dungeons, you only need to send the packet once.

did you play void or other private servers?
I played in one of the official server

[jamwan]

Originally Posted by MFA001

did you play void or other private servers?
I played in one of the official server

tested on Asia server, but if WPE works in your server it should work theoretically.

[cispi]

Tested on void , works.
The values goes from 100 to 1000, i think it's very random, for example mine was 644.

Anyone know the value for the boxes's drop? i know the wooden is 210, i want to know the others ^^

[Nevada']

Not working:O
~Els_DE/Void

Packet Size: 1418 :0

Stuck on blackscreen:I

[jamwan]

Originally Posted by Chi_Yoku

Not working:O
~Els_DE/Void

Packet Size: 1418 :0

Stuck on blackscreen:I

Make sure to test packets that are at the last part of the list scroll down and begin from the very bottom. As far as i know almost all Elsword versions share the same codding now.

[Nevada']

Originally Posted by Chi_Yoku

^here vid.

[jamwan]

Originally Posted by Chi_Yoku

^here vid.

Please check the video in the spoiler it should work that way.

[MFA001]

Originally Posted by jamwan

You should only start scanning before destroying the door, the packet you need is most likely the one with the highest value that was sent by(source)IP+socket 8080, the value for changing stages probably doesn't have a definite value since i never got the same value whenever i retry or try different dungeons, you only need to send the packet once.

i did, and i found this message "stage information is incorrect"

[Nevada']

Originally Posted by MFA001

i did, and i found this message "stage information is incorrect"

Packet 188?

[srakapraptaka]

I found the solution to that - you will need to scan for the stage skipping as it is in the first post, and then you will need to scan for a packet that makes the screen visibile again(so you will need to keep scanning even after you move to the next stage). Then you will see information that the stage is incorrect, yet you will be able to play anyway and the stage will get skipped.

[MFA001]

Originally Posted by srakapraptaka

I found the solution to that - you will need to scan for the stage skipping as it is in the first post, and then you will need to scan for a packet that makes the screen visibile again(so you will need to keep scanning even after you move to the next stage). Then you will see information that the stage is incorrect, yet you will be able to play anyway and the stage will get skipped.

"keep scanning"?