This is one of those things that worked for me, and I see alot of people getting confused on the same things I have.
First off, you download and install all the crap you need to on the begining of the V3noM post. That has to be done, you also have to download V3noM from the post. You extract all the items in the downloaded V3noM.
P.S. Make a copy of your original server.dat file from your conquer folder and save it somewhere safe. You will need it to know your original server ip.
I had to extract everything to my desktop because if I tried to extract it to my conquer folder the program I used would have an error trying to over write some files. So I extracted everything to my desktop or to a new folder, then highlighted everything and cut or coppied it, then pasted it to my conquer folder. You have to make sure all conquer programs and venom lite are closed before you past it into the conquer folder or it will not copy properly.
After you have done all of this, you must use the conquer.exe file to open conquer, do not use the play.exe file. If you have a shortcut to conquer on your desktop, errase it and replace it with a shortcut of the conquer.exe that is in your conquer folder after you have coppied everything from the V3noM archive.
Now you have to open your original server.dat file, not the new one in your conquer folder, the original one, and find your server. It will look like this.
GroupAmount=10
Group1=GroupPic10
Group2=GroupPic9
Group3=GroupPic8
Group4=GroupPic7
Group5=GroupPic6
Group6=GroupPic4
Group7=GroupPic5
Group8=GroupPic3
Group9=GroupPic2
Group10=GroupPic1
[Group1]
ServerAmount=6
Server1=Basilisk
Ip1=216.93.174.65
Port1=9958
ServerName1=Basilisk
HintWord1=
Pic1=servericon78
The bold section is a server example that is in the original server.dat file.
Ip1=216.93.174.65
That is what you will be looking for under the server you want. The original server IP.
The updated server.dat file will have all the IPs set to 127.0.2.1. So if you see all 127.0.2.1, you are searching through the wrong server.dat, you need to get the original. There are a few ways to get it but I dont feel like going into that right now.
Anyway, when you find the server IP of the server you want to log into, you need to open V3n0m01.ini which is in your conquer folder now. It will look like this.
localloginport=9958
localmapport=5816
remoteloginport=9958
remoteloginip=69.59.142.13
proxyip=127.0.0.1
consoleout=yes
logfile=coproxy.log
filter=0x3ee
The bold part is what you are looking for. remoteloginip=69.59.142.13.
You must change the 69.59.142.13, or whatever it is in your file, to the original server ip that you find in the original server.dat file. Make sure you save it then close it. Now, all you have to do is open V3n0m-lite.exe from your conquer folder, then open conquer.exe, not play.exe. And log into the server you updated V3n0m01.ini. It should work. It worked for me anyway. Good luck to everyone. And if anyone has a detailed discription of the of what the abilities of V3n0m do please send them to me.
Here is a copy of the original server.dat file in txt form.
)
