die ports hab ich im router offen, updater an usw.
aber der server is immer timed out.
wenn jmd lust hat kann er/sie es sich auch per Teamviewer anschaun.
hier ma grad meine confs:
logon:
Code:
####################################################################### # ArcEmu Realms Configuration File # Last updated at revision 425 by neo_mat ####################################################################### /******************************************************************************** * How to use this config file: * * Config files are in a block->variable->setting format. * * A < signifies the opening of a block, the block name is expected after that. * * After the block name, a space and then the settings sperated by = / ' '. * * * * e.g. * * <block setting="0" someval = "1"> * * * * Comments can be in C format, e.g. /* some stuff */, with a // at the start * * of the line, or in shell format (#). * ********************************************************************************/ # LogonDatabase Section # # These directives are the location of the `realms` and `accounts` # tables. # # LogonDatabase.Host - The hostname that the database is located on # LogonDatabase.Username - The username used for the mysql connection # LogonDatabase.Password - The password used for the mysql connection # LogonDatabase.Name - The database name # LogonDatabase.Port - Port that MySQL listens on. Usually 3306. # LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g # <LogonDatabase Hostname = "localhost" Username = "root" Password = "subzero92" Name = "arcemu" Port = "3306" Type = "1"> # Host Directive # # This is the address that the realmlist will listen on. # To listen on all addresses, set it to 0.0.0.0 # Default: 127.0.0.1 (localhost) # # Note: ISHost is the interserver communication listener. # <Listen Host = "0.0.0.0" ISHost = "0.0.0.0" RealmListPort = "3724" ServerPort = "8093"> # Server console logging level # # This directive controls how much output the server will # display in it's console. Set to 0 for none. # 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug # Default: 3 # <LogLevel Screen = "0" File = "-1"> # Account Refresh Time # # This controls on which time interval accounts gets # refreshed. (In seconds) # Default = 600 # <Rates AccountRefresh = "600"> # Accepted Build Range Setup # # These two directives set up which clients will be # allowed to authenticate with the realm list. # # Set these to the same builds that the server was # compiled for. # # As of the last update, version 2.1.1 was build 6739. # <Client MinBuild = "8606" MaxBuild = "8606"> # WorldServer Setup # # RemotePassword # This directive controls the password used to authenticate with the worldserver. # It must be the same between the two configs. If it is not, your server will # not register. # # Default: "change_me_logon" # # AllowedIPs # This section MUST be completed, otherwise all attempts to link your servers will fail. # These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed # to make server connections to your logonserver, and register realms. # For example, everything in the 127.0.0.* range would be: # 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0 # # To allow a single IP, # 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match. # # AllowedModIPs # In the same form as AllowedIPs, these are the IPs that are allowed to modify the database # (adding bans, GMs, account permissions, etc) # <LogonServer RemotePassword = "subzero92" AllowedIPs = "192.168.0.170/24" AllowedModIPs = "192.168.0.170/24">
Code:
####################################################################### # ArcEmu Realms Configuration File # Last updated at revision 336 by Dameon ####################################################################### /******************************************************************************** * How to use this config file: * * Config files are in a block->variable->setting format. * * A < signifies the opening of a block, the block name is expected after that. * * After the block name, a space and then the settings sperated by = / ' '. * * * * e.g. * * <block setting="0" someval = "1"> * * * * Comments can be in C format, e.g. /* some stuff */, with a // at the start * * of the line, or in shell format (#). * ********************************************************************************/ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LogonServer Section # # Address: # The address (no port) of the server. # # Port: # The port on which the logon server listens. (*** NOT 3724 ***) # # Name: # Not really relavant, but name the logon. # # RealmCount: # The number of realms in the next section. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <LogonServer Address = "deepshadow.dyndns.org" Port = "8093" Name = "Logon" RealmCount = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Realm Section # # Name: # The name of the realm. # # Address: # The address (and port) of that realm. # # Icon: # The type of realm (PVP, Normal, RPPVP, RP) # # TimeZone: # The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, # 5=Tournament, 6=Korean, 8=English, 9=German, 10=French) # # Population: # (0 = low, 1 = medium, 2 = high) # # Important information below # # change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server. # This issues come up a lot! # # Timezone values : # 0=Korean # 1=Development # 2=United States # 3=Oceanic # 4=Latin America # 5=Tournament # 6=Korean # 8=English # 9=German # 10=French #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Realm1 Name = "Quipe CrackZ" Address = "deepshadow.dyndns.biz:8129" Icon = "PVP" Population = "0.0" TimeZone = "9">
Code:
####################################################################### # ArcEmu Configuration File # Last Update: $Id: arcemu-world.conf 336 by Dameon $ ####################################################################### /******************************************************************************** * How to use this config file: * * Config files are in a block->variable->setting format. * * A < signifies the opening of a block, the block name is expected after that. * * After the block name, a space and then the settings sperated by = / ' '. * * * * e.g. * * <block setting="0" someval = "1"> * * * * Comments can be in C format, e.g. /* some stuff */, with a // at the start * * of the line, or in shell format (#). * ********************************************************************************/ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Database Section # # Database.Host - The hostname that the database is located on # Database.Username - The username used for the mysql connection # Database.Password - The password used for the mysql connection # Database.Name - The database name # Database.Port - Port that MySQL listens on. Usually 3306. # Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <WorldDatabase Hostname = "localhost" Username = "root" Password = "subzero92" Name = "arcemu" Port = "3306" Type = "1"> <CharacterDatabase Hostname = "localhost" Username = "root" Password = "subzero92" Name = "arcemu" Port = "3306" Type = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Listen Config # # Host # This is the address that the server will listen on. # To listen on all addresses, set it to 0.0.0.0 # Default: 127.0.0.1 (localhost) # # WorldServerPort # This is the port that the world server listens on. # It has to be the same as what is specified in the # realms table in the LogonDatabase. # Default: 8129 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Listen Host = "127.0.0.1" WorldServerPort = "8129"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Log Level Setup # # Console Logging Level # This directive controls how much output the server will # display in it's console. Set to 0 for none, or -1 to disable. # -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug # Default: 3 # # World server packet logging feature # If this directive is turned on, a file called `world.log` # will be created in the server's directory and all packets # sent and received by clients will be dumped here in bfg # format. # Default: 0 # # DisableCrashdumpReport # Disables crashdump reports, else if the build has debugging enabled, # arcemu-world will call ./arcemu-crashreport every time it starts, so # if there is a core, a crashdump will automatically be reported # to the tracker at sf.net # Needs gdb and curl # Linux only # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Server Settings # # PlayerLimit # This directive controls the amount of sessions that will be # accepted by the server before it starts to add people to # the server queue. # Default: 100 # # Motd # This message will be displayed by the server in the chat # box every time any user logs on. Colors can be used in the # standard WoW format. # Default: "No MOTD specified # # Send Stats On Join # This directive controls whether the server will send the online player # count to a cilent when it enters the world. # # Breathing Setup # If the breathing code is causing problems or you want to run a fun server, you can disable # water checks by enabling this directive. # Default: 1 # # Seperate Channels Control # This directive controls whether horde and alliance chats will be seperated across channels. # Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other # across channels. # Default: 0 # # Compression Threshold # This directive controls the limit when update packets will be compressed using deflate. # For lower-bandwidth servers use a lower value at the cost of cpu time. # Default: 1000 # # Queue Update Rate # This directive controls how many milliseconds (ms) between the updates # that the queued players receieve telling them their position in the queue. # Default: 5000 (5 seconds). # # Kick AFK Players # Time in milliseconds (ms) that a player will be kicked after they go afk. # Default: 0 (disabled) # # Connection Timeout # This directive specifies the amount of seconds that the client will be disconnected # after if no ping packet is sent. It is advised to leave it at the default. # Default: 180 # # Realm Type # This is the realm type that will be used by the server to handle world pvp. # Default: 0 (pve)(RPPVE) # Other values: 1(pvp)(RPPVP) # # AdjustPriority # Set the server to high process priority? # Default: 0 # # RequireAllSignatures # This directive controls whether the full 10 signatures will be required in order # to turn in a petition. Smaller servers would be better off having it turned off. # Default: off # # ShowGMInWhoList # This directive controls whether GM's will be shown in player's who lists or not. # Default: on # # MapUnloadTime # This directive controls whether to unload map cells after an idle period of <x> seconds. # Use on smaller servers or servers that are memory-limited. The server without cell unloading # can use over 1.2GB memory with all creatures loaded. # Default: 0 # # LimitedNames # This directive forces all character names to be a-z and A-Z compliant. # Default: 1 # # UseAccountData # This directive determines whether the account_data table is used to save custom client data. # May cause buggy behaviour. # Default: 0 # # AllowPlayerCommands # This directive, if enabled can allow players to use commands with a '0' command group. # Default: 0 # # EnableLFGJoin # If this is enabled, you can join the LFG channel without using the LFG tool. # Default: 0 # # TimeZone # Set your local timezone relative to GMT here. # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Server PlayerLimit = "100" Motd = "Willkommen auf dem Quipe CrackZ Privat Server!" SendStatsOnJoin = "1" EnableBreathing = "1" SeperateChatChannels = "0" CompressionThreshold = "1000" QueueUpdateInterval = "5000" KickAFKPlayers = "0" ConnectionTimeout = "180" RealmType = "1" AdjustPriority = "0" RequireAllSignatures = "0" ShowGMInWhoList = "1" MapUnloadTime="0" LimitedNames="1" UseAccountData="0" AllowPlayerCommands="0" EnableLFGJoin="0" TimeZone="0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Announce Configuration # # Tag # Configure what is shown in front of your announces in the [] brackets. # Default: Staff (would give [Staff]) # # GMAdminTag # Configure whether the <GM> or <Admin> tag is shown in announces. # Default: 0 (disabled) # # NameinAnnounce # If this is enabled the name of the person who makes an announcement will be shown in front of the msg. # Default: 1 (enabled) # # NameinWAnnounce # If this is enabled the name of the person who makes an wide-screen announcement will be shown in front # of the message. # Default: 1 (enabled) # # ShowInConsole # This controls whether announces are shown in the arcemu-world console or not. # This does not apply for the team-internal GM announce. # Default: 1 (enabled) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Announce Tag = "Admin" GMAdminTag = "0" NameinAnnounce = "1" NameinWAnnounce = "1" ShowInConsole = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Die Directive # # If this triggers it means you didn't read your config file! # Just comment it or remove it when you've read this. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# #<die msg="I am a newb who didn't even read half my config file!"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Power regeneration multiplier setup # # These directives set up the multiplier in which regen values will be # multiplied by every 2 seconds. # Powers: # Power1 = Mana, Power2 = Rage, Power3 = Energy # # Reputation: # Kill = Rep gained on kill, Quest = rep gained from quests # # Honor: # Honor = multiplier used to calculate honor per-kill. # # PvP: # PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000) # ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue # # XP: # The xp that a player receives from killing a creature will be multiplied # by this value in order to get his xp gain. # # RestXP: # Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar) # Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster, # F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8). # Note that resting in a resting area (Zzz) goes 4 times faster. # Default: 1 (bubble every 8 hrs) # # Drop(Color): # These values will be multiplied by the drop percentages of the items for creatures # to determine which items to drop. All default to 1. # To allow you better control of drops, separate multipliers have been created for items # of each quality group. # # DropMoney: # This value will be multiplied by any gold looted and pickpocketed # # Save: # Value in milliseconds (ms) that will be between player autosaves. # Default: 300000 (5 minutes) # # SkillChance: # The chance that you have to level up a skill in melee or a profession is multiplied # by this value. # Default: 1 # # SkillRate: # The amount of "levels" your skill goes up each time you gain a level is multiplied # by this value. # # ArenaMultiplier # Every week/day the arena points gained by a player will be multiplied by this value. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Rates Health="1" Power1="1" Power2="1" Power3="1" QuestReputation="1" KillReputation="1" Honor="1" PvPTimer="300000" ArenaQueueDiff="150" Compression="1" XP="1" QuestXP="1" RestXP="1" DropGrey="1" DropWhite="1" DropGreen="1" DropBlue="1" DropPurple="1" DropOrange="1" DropArtifact="1" DropMoney="1" Save="300000" SkillChance="100" SkillRate="100" ArenaMultiplier2x="1" ArenaMultiplier3x="1" ArenaMultiplier5x="1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GM Client Channel # # This should be set to 'gm_sync_channel' for the My_Master addon to work. # Default: gm_sync_channel # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <GMClient GmClientChannel = "gm_sync_channel"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Terrain & Collision Settings # # Set the path to the map_xx.bin files and whether unloading should be enabled # for the main world maps here. Unloading the main world maps when they go idle # can save a great amount of memory if the cells aren't being activated/idled # often. Instance/Non-main maps will not be unloaded ever. # # Default: # MapPath = "maps" # vMapPath = "vmaps" # UnloadMaps = 1 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Terrain MapPath = "maps" vMapPath = "vmaps" UnloadMaps = "1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Log Settings # # Cheaters: # This directive sets up the cheater logging file, if turned on any # cheat / packet exploit / speedhack attempts will be logged here. # # GMCommands: # These two directives set up the GM command logging fie. If turned on, # most gm commands will be logged for this file for abuse investigation, etc. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Log Cheaters="0" GMCommands="0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Mail System Setup # # These directives control the limits and behaviour of the ingame mail system. # All options must have Mail prefixed before them. # # ReloadDelay # Controls the delay at which the database is "refreshed". Use it if you're # inserting mail from an external source, such as a web-based interface. # 0 turns it off. # Default: 0 # # DisablePostageCostsForGM # Enables/disables the postage costs for GM's. DisablePostageCosts overrides this. # Default: 1 # # DisablePostageCosts # Disables postage costs for all players. # Default: 0 # # DisablePostageDelayItems # Disables the one hour wait time when sending mail with items attached. # Default: 1 # # DisableMessageExpiry # Turns off the 30 day / 3 day after read message expiry time. # WARNING: A mailbox still cannot show more than 50 items at once # (stupid limitation in client). # Default: 0 # # EnableInterfactionMail # Removes the faction limitation for sending mail messages. Applies to all players. # Default: 1 # # EnableInterfactionMailForGM # Removes the faction limitation for sending mail messages, but only applies # to GM's. EnableInterfactionMail overrides this. # Default: 1 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Mail ReloadDelay="0" DisablePostageCostsForGM="1" DisablePostageCosts="0" DisablePostageDelayItems="1" DisableMessageExpiry="0" EnableInterfactionMail="1" EnableInterfactionMailForGM="1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Status Dumper Config # # These directives set up the status dumper plugin. Filename is an # absolute or relative path to the server binary. Interval is the # time that the stats will be dumped to xml. # Default: stats.xml / 120000 (2 minutes) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <StatDumper FileName = "stats.xml" Interval = "120000"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Startup Options # # Preloading # This directive controls whether the entire world will be spawned at server # startup or on demand. It is advised to leave it disabled unless you are a # developer doing testing. # Default: off # # Background Loot Loading # This directive controls whether loot will be loaded progressively during # startup or in the background in a seperate thread. Turning it on will # result in much faster startup times. # Default: on # # Multithreaded Startup # This controls whether the server will spawn multiple worker threads to # use for loading the database and starting the server. Turning it on # increases the speed at which it starts up for each additional cpu in your # computer. # Default: on # # Additional Table Binding # You can load static item/creature/etc data into the server using this directive. # This way throughout database updates your custom data can be preserved. # Format: "sourcetable destination table,sourcetable destinationtable" # Example: "myitems items,mynpcs creature_names" # Default: "" # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Startup Preloading = "0" BackgroundLootLoading = "1" EnableMultithreadedLoading = "1" LoadAdditionalTables=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Flood Protection Setup # # Lines # This is the number of "messages" or lines that it will allow before stopping messages from # being sent. This counter is reset every "Seconds" seconds. # Default: 0 (disabled) # # Seconds # This is the number of seconds inbetween the Line counter being reset. # Default: 0 (disabled) # # SendMessage # If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds." # message will be sent upon flood triggering. # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LogonServer Setup # # DisablePings # This directive controls whether pings will be sent to the logonserver to check # if the connection is still "alive". Expect problems if it is disabled. # Default: 0 # # RemotePassword # This directive controls the password used to authenticate with the logonserver. # It must be the same between the two configs. If it is not, your server will # not register. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <LogonServer DisablePings = "0" RemotePassword = "subzero92"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # AntiHack Setup # # Teleport # This directive controls anti-teleport hack checks will be enabled or not. # Default: 1 # # Speed # This directive controls anti-speed hack checks will be performed on player movement or not. # Default: 1 # # SpeedThreshold # This directive controls the threshold at which the speedhack detection will trip. # It's (characters' move time of distance - real move time of distance) # Default: -600.0 # # FallDamage # This directive controls anti-fall damage hack checks will be performed on player movement or not. # Default: 1 # # Flying # This directive controls whether flight hacks will be performed on players or not. # Default: 1 # # FlightThreshold # This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks. # Default: 10 # # DisableOnGM # This directive controls hack checks will be disabled for GM's or not. # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <AntiHack Teleport="1" Speed="1" FallDamage="1" Flight="1" FlightThreshold="10" DisableOnGM="0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Period Setup # # These are the periods that the server will wait before doing periodic duties. At the moment only # arena point calculation and honor point calculation are used here. # # Default: # Arena: weekly # Honor: daily # (blizzlike values) # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Periods HonorUpdate="daily" ArenaUpdate="weekly" DailyUpdate="daily"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channels Setup # # These directives control some of the aspects in the channel system. # # BannedChannels # If you would like to ban users from creating or joining a channel specify them here in a ';' # seperated list. # Default: "" # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Channels BannedChannels=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # VoiceChat Setup # # These directives control some of the aspects in the voice chat system. # # Enabled # If you want to enable the voice chat system, this must be set to 1. # Default: "0" # # ServerIP # This is the IP of the voice chat server. # Default: "127.0.0.1" # # ServerPort # This is the TCP port of the voice chat server. # Default: "3727" # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <VoiceChat Enabled="0" ServerIP="127.0.0.1" ServerPort="3727"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remote Console Setup # # These directives control the remote administration console. # # Enabled # If you want to enable the remote administration console, set this. # Default: 0 # # Host # This is the interface the RA server listens on. # Default: "0.0.0.0" # # Port # This is the TCP port the RA server listens on. Connect to it with a regular telnet client. # Default: 8092 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <RemoteConsole Enabled="0" Host="0.0.0.0" Port="8092"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Scripting Engine Setup # # ArcEmu can support multiple script backends via the means of loading .dll files for them. # This section in the config can enable/disable those backends. # # LUA # If you would like to enable the LUA scripting backend, enable this. # Default: 0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <ScriptBackends LUA="1" AS="1"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Movement Setup # # NOTE: For any of these directives to function, movement compression has to be compiled into # the server. # # FlushInterval # This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent. # If you have a high threshold, keeping this at 1-2 seconds will work better. # Default: 1000 (one second) # # CompressionRate # This is the deflate compression rate. Higher will use more cpu, but smaller packets. # Range: 1-9 (or 0 is disable) # Default: 1 # # CompressionThreshold # This is the distance that will be used to determine if an object needs to be sent compressed or # normal. It is advised to keep it at least 30 units. This value is used for players. # Default: 30.0 # # CompressionThresholdCreatures # This is the distance that will be used to determine if an object needs to be sent compressed or # normal. This value is used for creatures, so it can be a lot lower. # Default: 10.0 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Movement FlushInterval="1000" CompressRate="1" CompressThreshold="30.0" CompressThresholdCreatres="10.0"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Die Directive # # You should know what to do here :P # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# #<die2 msg="I read nearly all my config file, but not the whole thing!"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Localization Setup # # LocaleBindings # This is a list of locale names and the other locale you want to associate with them. # For example, to make the European client always use the french language, "enGB=frFR" # # Must be terminated by a space. # # Default: "" # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <Localization LocaleBindings=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Dungeon / Instance Setup # # TakeGroupLeaderID # If a player doesn't have an instance id, the group isn't already assigned # to an instance and the group or raid leader already have one, the player will # be bound to the instance id of the group/raid leader. # Default: 1 (enabled) # # SlidingExpiration # If enabled, persistent instances will expire relative to the creation time. # Otherwise persistent instances will expire at fixed points of time. (blizz like) # Default: 0 (disabled) # # DailyHeroicInstanceResetHour # Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration. # Default: 5 # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# <InstanceHandling TakeGroupLeaderID="1" SlidingExpiration="0" DailyHeroicInstanceResetHour="5" >