About this guide
This guide will show you how to get your engineering skill up from 0 to 300.The guide will only use recipe's available at a trainer until 260 and vendoravailable recipe's from 260 to 300.
This guide only uses recipes that require components aquired through miningand vendor bought material (flux), except for some leather and cloth.
This guide does not tell you how to get all the different recipe's fromquests, vendors or drops. What you do once you hit 300 is entirely up toyou.
This guide is primarily aimed at those who want to switch profession at highlevel or have high level alts, friends or guildmembers.
Preparation
You are going to need a lot of bars and stone and some cloth. Create an altstorage character to store these and then farm (or have an alt farm) for thematerial needed. Use the ingame mail system to send the bars and stone to thestorage character. You may need more then one storage character. Don't forget tosend some gold to the storage character, so she can send the bars and stoneback.
Once you have all the components collected everything has to be send back toyour main character. The mailbox only shows the first 50 items you have in themail. It also puts the last item send to you on top. So to avoid complicationssend the components you need first last: i.e the rough stone and copper bars areneeded first, so these are the last to be send back to your main, after thecoarse stones and tin bars, etc.
The recipe's used require vendor bought components such as flux. These costgold. To learn recipe's from a trainer also costs gold. The amount of goldneeded is aproximately 10 gold if you farm all of the material. If you want tobuy everything you need from the auction house expect to spend upwards to 125gold.
Below is a table that shows the amount of bars and stone needed. The minimumamount column shows the minimum amount needed if you would get a skill pointevery time you make something. However at some point a recipe will be yellow oreven green when you make something so you won't allways get a skill point. Theestimated amount column deals with this, so try to get the estimated amount ofbars and stone on your storage character. If you buy everything from the auctionhouse get the minimum amount and only buy more when needed. This table includesthe components needed for becoming gnome or goblin engineer.
MAG= Minimum Amount Gnome
MAB= Minimum Amount Goblin
EAG= Estimated Amount Gnome
EAB= Estimated Amount Goblin
Component MAG MAB EAG EAB
Copper Bar 69 69 80 80
Bronze Bar 49 55 60 60
Iron Bar 25 55 35 65
Steel Bar 4 4 4 4
Mithril Bar 88 70 98 80
Thorium Bar 165 165 180 180
Silver Bar 10 10 15 15
Gold Bar 5 5 10 10
Rough Stone 30 30 40 40
Coarse Stone 20 20 20 20
Heavy Stone 15 40 20 40
Solid Stone 100 120 120 140
Dense Stone 30 30 40 40
Linen Cloth 10 10 15 15
Wool Cloth 32 30 40 40
Silk Cloth 10 10
Mageweave Cloth 10 10 15 15
Runecloth 25 25 30 30
Medium Leather 7 5 10 5
Heavy Leather 8 8
Jade 1 1
Citrine 1 1
Wooden Stock 10 10 10 10
Weak Flux 25 24 30 30
Gnome or Goblin
At some point you probably are going to make a choice between gnome or goblinengineering. You have to make several engineering items for those paths, so withsome planning making those items can be used to get skill points as well. Atskill 125 the guide wil split into a gnome and goblin part.
Getting from 1 to 50
Make rough blasting powder until skill 30.
At 30 you can make handfull of copper bolts. you are going to need at least30 copper bolts in recipe's used to get from 50 to 125 so lets make those. Thisshould get you to 50 comfortably
Once you hit 50 talk to the appropriate trainer to become JourneymanEngineer. You have to be level 10 to become Journeyman Engineer.
This table shows the different recipes used to get from 0 to 50.
Getting from 50 to 125
At 50 you can train and then make an arclight spanner. Since you are going toneed one in your engineering career, you might as well make one now and get askill point.
Make copper tubes to get to 65 and use those to make rough boomsticks to getto 75.
Make coarse blasting powder to get to 90. You need 20 to make small bronzebombs later on.
Make copper modulators to get to 95, needed for target dummy's
Make target dummy's to get to 100.
Make silver contacts to get to 110. These are needed to make small bronzebombs. If you want to become a goblin engineer you are going to need 10 silvercontacts later on, so set those aside.
Make bronze tubes to get to 120 and small bronze bombs to get to 125. If youhave some leftover copper bolts you can use those to make some practice locksinstead of bronze tubes. If you want to become a gnome engineer you are going toneed one bronze tube to make an accurate scope, so set one aside.
Once you hit 125 talk to the appropriate trainer to become Expert Engineer.You have to be level 20 to become Expert Engineer.
This table shows the different recipes used to get from 50 to 125.
Getting from 125 to 200
At level 30 and with a engineering skill of 200 you can make a choice tobecome a gnome or goblin engineer. To become either one you have to show somework to Oglethorpe Obnoticus for gnome engineering or to Nixx Sprocketspring forgoblin engineering. Since most of the things you have to make fall within the125 to 200 skill range, I decided to split the guide here into a gnome versionand a goblin version. I'll start with gnome engineering. Scroll down for goblinengineering. If you haven't decided which path to take yet, follow the gnomeengineer version.
Gnome Engineering
Make heavy blasting powder to get to 140.
Make whirring bronze gizmos to get to 145.
Make bronze frameworks to get to 150. You need 2 for the gnome engineerquest, to make advanced target dummy's and about 5 to make explosive sheep forskill ups.
Use the heavy blasting powder, whirring bronze gizmo and bronze framework tomake explosive sheep to get to 155. Remember to keep 2 bronze frameworks for thegnome engineer quest.
Make gold power core to get to 160. Keep the gold power cores, you need themto make gyrochronatoms.
Make iron struts to get to 170. These are also used to make advanced targetdummy's.
Make gyrochronatoms to get to 175. These are used for advanced target dummy'sas well.
At 175 you can make the Gyromatic Micro-Adjustor. Since you are going to needone in your engineering career, you may as well make one now and get a skillpoint. The steel bars needed is made by miners from iron bars and coal.
Make solid blasting powder to get to 195. You need at least 50 solid blastingpowder in future recipe's, so make those.
Now make 2 advanced target dummy's, one accurate scope and 6 mithril tubesfor the gnome engineering quest. This should get you past 200. If you haven'tdecided which path to follow, skip the accurate scope and mithril tubes and makeadvanced target dummys to get to 200.
Goblin Engineering
Make 40 heavy blasting powder which are needed to make big iron bombs andexplosive sheeps.
Make 5 whirring bronze gizmos which are needed to make explosive sheep. Youshould now be at skill 145. Make some more whirring bronze gizmos to get to 145if you're not.
Make bronze frameworks to get to 150. You need 5 bronze frameworks to makeexplosive sheep for the goblin engineering quest.
At 150 you can make explosive sheep . You need 5 explosive sheep, so makethose.
Make gold power core to get to 160. Keep the gold power cores, you need themto make gyrochronatoms.
Make iron struts to get to 170 and gyrochronatoms to get to 175. Keep these,you may need them later to make advanced target dummy's
At 175 you can make the gyromatic micro-adjustor. Since you are going to needone in your engineering career, you may as well make one now and get a skillpoint.
Make 10 solid blasting powder which is needed to make solid dynamite.You arealso going to need at least 50 solid blasting powder in future recipe's, so makethose too.
Make solid dynamite which is needed for the Goblin Engineering quest. Youneed 20 solid dynamite. The recipe gives 2 solid dynamite each time you makethem, so you only need to use the recipe 10 times.
At 190 you can make big iron bombs which are needed for the GoblinEngineering quest. You need 20 big iron bombs. The recipe creates 2 bombs eachtime, so use the recipe 10 times.
Make advanced target dummy's to get to 200 if you're not there yet.
Once you hit 200 talk to the appropriate trainer to become Artisan Engineer.You have to be level 35 to become Artisan Engineer.
This table shows the different recipes used to get from 125 to 200.
Getting from 200 to 300
Use the solid blasting powder to make unstable triggers to get to 210 and hi-impact mithril slugs to get to 230.
Make mithril casings and use those with the unstable triggers to make hi-explosive bombs to get to 245.
Make mithril gyro-shot to get to 250.
Make dense blasting powder to get to 260.
Make thorium widgets to get to 285 and thorium tubes to get to 300. Depending on the prices for thorium bar and the thorium shells recipe in the auction house on your server, it may be cheaper to make thorium shells instead of tubes. If you are a gun wielding hunter and have the thorium shells recipe, you can also make thorium shells to get to 300.
Congratulations, you now have 300 skill in engineering.
This table shows the different recipes used to get from 200 to 300.
So. Ich habe den Guide NICHT selber geschrieben. Sorry für die Tabelle von 125-200. Da war so n blödes Werbe add im bild :/
Rauskopieren ging auch nicht, hat mir immer die formatierung zerrissen. Aber ich denke, man sieht dann was man herstellen muss.
gruß,
.p2.
, u sure there are no other viable classes for engineering? 
