How-To: Using iBot from start to finish. 100% WORKS

[whitebearded]

Originally Posted by AtariGod

my game keeps dcing after 5 minutes of being ingame and i dont know how to fix it

hmmm can you tell us the exact steps u doing when u open sro till you login i might understand what's wrong and help you out !

[theperfume]

Originally Posted by Emiis

When i log on with my character i get error : Error -chardata - Invalid procedure call or argument -34A6 then DC... how to fix it ?

ty , if i find a solution i will anounce .

[whitebearded]

you guys should this new guide
about the dcing problems maybe because you guys close the hs server any who hope u get the answer pretty soon cuz ibot works just fine for me atm cheers

[YungJoc]

i know why i cant move faster, i have a bug in my inventory, the first and last positions in the inventory always switch so that my char stops every 2 seconds..

anyone know how to fix that??

[rippawu]

HS server is busy or down !

Any ideea why i recive this mesage when i start IBot ??? Please help

[whitebearded]

Originally Posted by rippawu

HS server is busy or down !

Any ideea why i recive this mesage when i start IBot ??? Please help

yea you should open hack shield in ibot leave it open then open silroad exe
from sro folder leave it open then open ibot and it will work

[BlackManta]

where i get a tool for proxy ? :/

[nzskuxx2011]

hey im a noob with ths stuff i waz wondering if mayb you could team veiwer me nd mayb help me do ths ???? itd b much apreciated

[EuroPolak]

Hi I was wondering if someone could help me, this is my first time trying any Silkroad bot so I feel kind of noob lol!

Whenever I click launch on silkloader5 it launches but then says "you have been disconnected from the server".

Any ideas what I might be doing wrong? thanks a lot in advance!

[oOCLouDOo]

====== all rights reserved by me want to publicate this post pm me =======
First make sure you have last version of ibot !!!

Download and instal this if you dont have it :
Microsoft Visual C++ 2008


NET Framework 3.5 service pack 1/2/3


NET Framework 2.0 best for service pack 2


Download Edx Loader if you dont have it!!! ...

 Spoiler

set it like...

Make sure you ar logon as ADMIN and you ar thinking tht you did every think like in the first Page here, if you did and you still here lets Go...
================================================== ==================================
Finde your Error and sugestion here :



Failed to create file transfer -Update Silkroad

 Spoiler

Clouse ibot and start silk from sro icon to make update silkroad

ServerSignature Error1 - download new ibot

 Spoiler

Originally Posted by jocex

Hello Every Body. i have big problem, i click run sro_client.exe and look at photo..

make sure you have last ibot

The server is undergoing inspection or update

 Spoiler

First Go and make sure ther is no inspecion at this moment if not...

1- Go to C:\WINDOWS\system32\drivers\etc
2- Open Hosts file by using Notepad program Duble Click or RMB- Right mouse button/Open by...
(if you dont see hosts file- go Folders Option at Folder bar / View/Show hide icon files etc)
3- after line " 127.0.0.1 localhost " add new line >>>
121.128.133.26 gwgt1.joymax.com
4- Save/exit/restart pc
if after restart still not work and host file is same like before whit out your edit you have some registry bug also download some free registry cleaner like this one and repair it. then do it agin steps 1,2,3,4

ε OCX. / DLL. ERROR's

 Spoiler

∴

 Spoiler

GO _iBot_ FOLDER / iBot_Necessities / regOCXFiles_winXP OR !!! regOCXFiles_win7 / Run it! and press "Space" button till instalation will hide. if you have some problems whit tht go here


ε tabctl3n.ocx error



∴ Go ibot/ copy tabctl3n.ocx / Go Windows/system32 /Paste here tabctl3n.ocx
Go Start/Run/ (type) CMD/ (type) regsvr32 C:\Windows\System32\tabctl3n.ocx
Enter
Now run client from ibot
if is ok than ok. but if still have some error


we still not finish also :
Easy way to fix it

Originally Posted by saintmilky

1.Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

Click the Start button , click the arrow next to the Lock button , and then click Restart.

2.Do one of the following:

•If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.

•If your computer has more than one operating system, use the arrow keys to highlight the operating system you want to start in safe mode, and then press F8.

3.On the Advanced Boot Options screen, use the arrow keys to highlight the safe mode option you want, and then press ENTER. For more information about options, see Advanced startup options (including safe mode).

4.Log on to your computer with a user account that has administrator rights.

When your computer is in safe mode, you'll see the words Safe Mode in the corners of the display. To exit safe mode, restart your computer and let Windows start normally.

Once you've restarted in safe mode, install the OCX file then, and you'll be good to go mate

Harder way
1. Click on 'Start', choose 'Run'. In the open box, type cmd, and then click
'OK'.
2. Type the following commands. Press 'ENTER' after each command:

3. take the name of dll file wich you have problem and register it like tht

Example :

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll
if you have some errors whit it we go hard now

For Vista
For that you will need to go to Control Panel > User Accounts and Family Safety > User Accounts and there click Turn User Account Control on or off. Unselect Use User Account Control (UAC) to help protect your computer option and click OK. That’s it. Now try to register your DLLs and you would be able to do that without any hiccups.

For XP / Vista / 7
Also there is shortcut method to do that from command line -
Start/run/cmd
Disable UAC:

C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe

ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Pol icies\System /v EnableLUA /t REG_DWORD /d 0 /f

Enable UAC:

C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe

ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Pol icies\System /v EnableLUA /t REG_DWORD /d 1 /f

Reboot your system and you are done.

And if you are getting this error while registering your DLLs -

The module REGSVR32 “C:\Program Files\xxx.dll? failed to load.

Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files.

The specified module couldn’t be found.
(I don’t know why that extra dot in the end – may be UI bug from Vista team!)
It means you are not giving proper path. Try to correct the path for your DLL and you will be able to register it.
if THT not helps just download
quote=KingTom;8067947]Hi When am Installing the RegOCX Files i get an Error, I Run as Administrator and Etc,

First One Comes for me like this:



And When I press any Button i get this for all of them:



If I Need To Start the PC In Safe Mode Please tell me The Steps am Running Windows 7

Thank You [/quote]

by Mass Mods

1st Step.

Go in to “Needed OCX Files” folder.
Right click and copy the following files.

VbEcplipse.ocx navigate to C:Windows\system32
comctl32.ocx navigate to C:Windows\system32
comdlg32.ocx navigate to C:Windows\system32

Right Click inside the folder, click Paste.

2nd Step.

Click Start button on your desktop.
Go to “Run”, click it, a box will appear where you can type.

Copy each line, and paste it in to run, then press enter.

regsvr32 "C:Windows\system32\VbEclipse.ocx"
regsvr32 "C:Windows\system32\comctl32.ocx"
regsvr32 "C:Windows\system32\comdlg32.ocx"

NET ERROR

 Spoiler

tht problem is not by your pc also stop blame it punch it etc.
Problem is whit the serwer from gejmax he have problem to whit ping to ya country/internet company what you using now
Also only what you can do to help the conection is

0 Make sure your naber not steal your conection
1 Turn off all shet on ya descop bar
2 Turn off IE/Firefox etc
3 Turn off Eany Proxy ip redirecting stuff
4 If you use eany Antyvirus/firewall Turn it oFF
5 For some antyviruses need to uninstal it (but try add sro/edx/ibot before uninstal)

and now if afta hard try to conect still nuthink go chill out becuse server need to get conection not you.

Error-(LaunchNow) sro_client.exe directory not set
Error- PLease edit srodir.ini and set the proper directory
error- SRO_Client.exe not found

 Spoiler

Go silkroad folder copy the directory above ther
EXAMPLE !
and paste to srodir.ini +add to line /sro_client.exe
if some problems delete (86x) ~^

SRO NOT START

 Spoiler

Windows 7 - Press right click on the sro_client.exe and give "Unblock"
Turn oF Firewall/antyVir

GameGuard" dont finish hes job - reset cpu

ε Crash ( immediately closes when you run by Sro icon !or ibot )
∴
by mass
ε When you press Run Client (in ibot) sro not start

∴ Make sure you ar logon as admin
if not helps/
Go ibot folder/SROdir.ini (open by notepad) and type direcion of your Silk louncher

example C:\Program Files (x86)\Silkroad\sro_client.exe exit/save

if not helps/

use CTRL+ALT+DEL then Task manager and check in the processes if you see a SRO_Client.exe runing if yes select it then end process , go to ibot.exe right click properties compatibility then enable run as administrator . Double click it and have fun .Preferable to not use the edx loader try to use the normal client.

ibot.exe: SN:9 SU:YOURID SP:YOURPASS AS:CHARNAME AB:1 AC:20000 HI
+ Server List by Numbers

 Spoiler

1 Log on as Administrator.


SN SilkroadServer : Server # (SN:1)
SU Silkroad User : User**** (SU:MyUser****)
SP Silkroad Pass : Password (SP:MyPassword)
AS Auto Select Char : **** (AS:Char****)
AB Auto Select Opt : Option (AB:2)
AC Auto Connect : Delay (AC:20000)
HI Hide iBot : (HI)

Server List No

# Silkroad Server ****
1 Xian
2 Aege
3 Troy
4 Athens
5 Oasis
6 Venice
7 Greece
8 Alps
9 Olympus
10 Tibet
11 Babel
12 RedSea
13 Rome
14 Sparta
15 ********
16 Pacific
17 Alexander
18 Persia
19 Zeus
20 Poseidon
21 Hercules
22 Odin
23 Mercury
24 Mars
25 Saturn
26 Venus
27 Uranus
28 Pluto
29 Neptune
30 Hera
31 Gaia
32 Eos
33 Phoenix
34 Ares
35 Iris
36 Titan
37 Apollo
38 Helios
39 Malazgirt(TR)
40 Petra
41 Tigris
42 Aral
43 Caspian
44 Maya


after that click Apply then OK.

ε DC Disconnect Problems

 Spoiler

MobId(Anynumberwithletters) doesn't exist anymore. - STOP BOT

DC after pressing start in character selection screen
Create New char at this acc and go to storage
Take off all Quest items what you got
Take off sell/use/drop event items like dimision stone ! and others
Exept DS Pandora Flag Lucky Vigors MpHp500 str int and other scrols
When you in char select screen wait ther 3mins then press start

if tht not helps ! redownload + reinstal silkroad


after 5-15mins
∴ Run sro as admin + delete from sro SilkErrSender.exe
∴ SroFolder /SRO_Client.exe -> Right click -> Properties -> Compatiby -> Windows XP Service Pack 2 or 3 or Windows 2003
∴Try whit out Hardmod if better try edxloader

ε Auto Relog Crash

 Spoiler

∴

ε HardMode DC after a whille

 Spoiler

∴ Download old Version of hardmode 9.4

BOT STUCK IN TOWN AT SOME NPC

 Spoiler

ya your bot go store/sell the stuff wut the noobs in ya pt pick up for nuthink
/on return to city -out of potions/ durb low OR invent get full becuse of trash wut he get by stupid pets whitout good bot stestings (wut cant select exacly what to pickp/sell/store/dont pick)
Also wut you can do is sellect in the bot the trash wut he have to SeLL
Licke : arrows tablets stones alchemy and other shets wut make your invent full or ya dont need.
the bot dont have a eany Place to buy more Stuff what did you sellect to buy at return to town.
now you know what to do.
Good bless ya

ε Skils / atack problems

 Spoiler

Cant switch wepons



Now :

1 select your wepon from inventory and set 1st=as PRIMARY wepon 2nd=SECONDARY wepon
2 to Primary add Only Buffs from 1st wepon if you use some
3 to Secondary add Only cler/warlock/bard etc Buffs (your sub class buffs/2nd wepon buffs)
4 dont add same buff to Secondary/Primary as imblue
5 unlock " always on" in bouth
6 dont event think to select "wepon check agin"
7 select "use normal atack" if you think you need it (at taxi/farm low lvl mobs)
8 Sequence adding skilz is important (take care of daly skilz time to get best efect)
9 enjoi boting ...

Bot Dont atack
-1 Inventory set agin your wepon (in buffs you can see actual name of ya wepon)
0 hunting range area more then 5' like 10/15/20 etc
1walk to random area if no mobs / in Misc Filter'
2 Remove auto res party members on rip / auto party stestings
3try "use normal atack"
4if not helps restart sro/ibot
5let me know
oke get some lvl by hand grind till 5-6-7 add 1skill and let us know coz some one here have same problem
SLOVED

ERROR CODE'S

 Spoiler

ε error code [34A6]
∴Remove all event items from storage.

ε error code 0x80004005 (Modul ccrpprg3N.ocx was downloaded but dllregisterserver call failed)
∴Turn Off antyvir / windows firewall

ε error regOCXFiles.bat
∴ Boot your computer in safe mode.. then run the .bat file from safe mode.. that should register them for you

[Error Code(2)]
Those who can't run the game normally, or those receiving an error message such as [Error code 2] due to the wrong operation of anti-virus programs, normal processing of the game will be possible when the game is newly installed after the uninstallation of the current game.
Also Download Manual patch (from joymax.com) / Turn off antyvir / Turn off all usles programs having contact whit internet/ Start patch/ Enjoi the Game =)

Error C6 - Go to Autoparty window and unselect all stuff because 80% tht make crash
when bot have stestings aboute party and you join other one >bang<

ERROR C 9
Also i see it meany fck dup erros etc and sugestion wut tht can be
But ! the Error C9 is mouste hardes to explain errors... for sro nation.
but ya not for me.
The Error C9 is becuse of transfer of packet wich sro is sending to us when we try to conect whit low internet speed OR we ar take them by Loaders/bots/clients (not create by sro/ profesional-compatibil stuff to game) and its make the packet not transfer directly to your silkroad game, also they a bit "lost" what make the conection whit server go down... wut give us C9 error
Also dont lisen 30000k noobs what say on this problem : "Reinstal sro, instal labiry 2000 etc etc...

We cant do much to help the packet's coz we use "stuff"
but ! here is my solution :

Make sure you dont dowload nuthink at your pc and if you share internet to difrent cpu check them out 2.
1. Turn off antyvir and every proces wich have conetion to internet and you not need him right now.
2. Thouse packet's ar geting lost when ping is geting higer then 200 also we need to help them /Press on Louncher silkroad link to web site/ go manualy to joymax./silkroad.com put your id and pw to log on panel and in one time Run Sro and Press Log in at Sro website if he log in before sro start up press refresh till silk turn on. \Be Bless

i hope every one understunde it and it will help you 2 =)



Getting runtime errors after selecting your character
- You can help me solve the problem by ticking the "Log Data" before you select your character or before you login
- It will generate "Log Files" in your iBot Folder
- Now, wait till you get the runtime error
- Close iBot then, upload All the "Log Files" and post the DL link here or you can send it to me here

- If I can spot the problem then it will be fix, hopefully on the next updates.

Getting runtime errors when going to CTF
- Sorry, iBot is build for botting not for CTF
- You can either not go to CTF or dont use iBot when going to CTF

Getting runtime error after select character.
- Be sure you dont have an active quests.
- Be sure you dont have an item that is rarely seen. (Ex. Event items)

Runtime error code Runtime error message Additional information

FiX

5 Illegal function call: Program error, verify the program has all the latest
updates. If updated try reinstalling the program. If you continue to have the same
errors contact the software developer.

6 Overflow: Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.

7 Out of memory: This issue can be caused when the computer does not meet the
programs system requirements or to much memory is already being used for the
program to run. If your computer meets the requirements try first reinstalling the
program to make sure it's not an issues with the program installation.

9 Subscript out of range: Program error, verify the program has all the latest
updates. If updated try reinstalling the program. If you continue to have the same
errors contact the software developer.

10 Duplicate definition: Program error, verify the program has all the latest
updates. If updated try reinstalling the program. If you continue to have the same
errors contact the software developer.
11 Division by zero: Problem with a math formula in the program or the programs
code. Verify no software updates are available for the program causing this error.
13 Type Mismatch: Make sure your system regional settings are setup correctly and
that the program you're running is made for your version of Windows.

14 Out of string space: Program error, verify the program has all the latest
updates. If updated try reinstalling the program. If you continue to have the same
errors contact the software developer.

19 No Resume: Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.

20 Resume without error: Program error, verify the program has all the latest
updates. If updated try reinstalling the program. If you continue to have the same
errors contact the software developer.
28 Out of stack space: This issue can be caused by a program or memory error. Try
reinstalling / updating the program.

35 Sub or Function not defined: Program error, verify the program has all the
latest updates. If updated try reinstalling the program. If you continue to have
the same errors contact the software developer.

48 Error in loading DLL: This issue is often caused with a bad installation or an issue caused after another program has been installed that replaced the programs DLL. Close all programs and TSRs and try installing the program again.

52 Bad file name or number: Program error, verify the program has all the latest
updates. If updated try reinstalling the program. If you continue to have the same
errors contact the software developer.
53 File not found: File required by the program to run is not found. Program needs
to be reinstalled or missing file(s) need to be copied back to the computer. ~


ε ErroR you got Banned
∴ Buy silks next time ~^

invalid picture error

 Spoiler

download NEW Labiry files at up of post> Link^ and run as administrator/ fixed

Hide/Show bot problem

 Spoiler

Unlock your windows bar/ right mouse on it/and finde it coz idk wut is your system. if you can see it you can clik it afta unlock bar.

Critical error Loading main gui form

 Spoiler

Originally Posted by _Rafa_

I have this error when i put the command for relog:

Also my adv instal new service pack

GUI Errors
"To resolve a GUI error, you must provide the sequence of steps you followed when you discovered the problem. You must also provide the operating system and the service pack version that you are using. We will use this information to reproduce the problem.
Providing specific operating system and service pack version is important, as GUI problems often only show up in a particular environment. "

if not helps
go here and they will help you out

Memory problems

 Spoiler

Do this steps

# Click Start, click Control Panel, double-click System.

# Click the Performance tab, and then click Change (In Windows 2000, click the Advanced tab, click Performance Options, and then Change).


# Type a new, larger value in the Maximum Registry Size box, and then click OK.

# Close Control Panel and then restart the computer.

Originally Posted by memorylost

hmm, okay i tested..it gives me more error. If I set all from Programs to Background and System Cache, my ibot would just give me more error such as char config error and etc. It takes me some time to set it back to default and reconfig my character's config. ANyway I guess i should re-explain my situation so you might catch what stuff is happening inside my pc.

try to set like me


*Starting from here*


The first error image before hand where I showed you regarding the error message with insufficient memory occured actually after I run several Ibot like 8 clientless if I've not mistaken. After I leave the clientless on for some time, when I wanted to launch the 9th clientless, it gave me that error. So I changed all the virtual memory but it doesn't help so at this moment I'm sticking to 6-7 clientless.

On the other hand, after I launch that 6-7 clientless, when I open a mixture of other programs like adobe pdf, microsoft word/excel and etc, sometimes it just wont launch and give me some error message. However, if I close like one of my clientless, the program worked like a charm again. I guess its something to really do with my memory. I just wanted to do my stuff at the same time using Ibot as well.

PS: I'm running on windows xp 32bit with 1gig ram and at the same time having this configuration for my virtual memory.
C: 2gig where silkroad folder is.
D: 1.5gig where its just normal documents i stuff in.
E: 1.5gig where ibot is located.

Thanks for all your replies. Hope to hear from you soon.

Also i must say 1gb ram is not much but shuld be enuch for sro+clients also i dont know wich DDR-ram u use DDR2 or 3 or 1 but let us get more from it and we gona see
so for you

Simple to use =)
just run 6clients free some ram and run more clients





try it and let me know ~^

Want to say tenx to google and all pple wut take the finght whit erros

iBot is to cool to give up whit the errors


ANSERWS FOR NEW QCUESTIONS



BSObj Plugin - Can't create file transfer menager...

 Spoiler

Originally Posted by soulspeardestruction

so hello guys i just downloaded the new ibot version 1.0.88 and tried to start it but there just appeared an error message

here is a screen of the message:

this error normally appear when u dont update the sro_client. but i updated the client and i can start sro legit or with other bots but if i try to run it with ibot just this thing appear..hm
i use it for 2 weeks or more and it worked smoothly...

someone have a idea how to fix this sh** [...]

1 download new ibot if not help change edxLoader on Hardmode
or just version of them for me edx5.0 works and 5.2 not if tht not helps...
When you download it the sro ther whos some connetion problems or some think whit your cpu tht make the file "shiet"
Download sro from oficial web site and try to not louse connetion whit your internet ~^

Error- Auto Relog Has Stopped Working

 Spoiler

Press and Hold on (3sec) Enter button on your Keyboard
iF not help... Exit/Run Client agin

Error - chardata - 34A6
Error - htd - 34A6

 Spoiler

1 remove usles stuff from ya storage and Quest items from npc event items like dimision stones
(exept DS Pandora str int etc scrolls flags Zergs mphp500 lucky vigors grains) and go next step
2 if you have mag pop green item go to npc to get revard from it
3 delete your char config in ibot folder / relog ibot
4 log in and teleport event if you ar in city
5 if tht not helps use/sell/delete event items and try log in after every part !
first part: vigors/ grains
part2: mphp500
-: str int etc scrolls
-: flags lucky
-: Zergs
-: DS Pandora =/
6 95% you get sloved tell me if it work =)

Cannot connect to the server because acces to the current ip has exceede its limit

 Spoiler

1: change port +5 for each one client 16005/16010/16015 etc
2:be sure you dont log in at same acc
3:remove silkerrorsender from sro folder
4:if tht not helps probably you got hacked one of your chars and some one is online on it
5: let me know afta tht steps

Video Turorials

 Spoiler

ibot+Clientless
ibot+Clientless

or ribot+Clientless

ibot

Tools compatible whit ibot

 Spoiler

AutoRelogin Tool for ibot


AutoSelect by DeSwa

 Spoiler

Just register
http: // www .g *a m e r* z p l a *n e t . n e t / forums/silkroad-online-hacks-bots-downloads/292446-autoselect-final-version.html
Whitout Space and *

AutoBuff 0.25(beta) by theoneofgod



iTool

Map's

 Spoiler

alex

NexT...

Look/Finde your Error-Problem here (Ctrl+F) /Fix it/ Thenx it/ Be Bless/

If ya did not finde it... Try to explain best as you can your error or give screen
If i did not anserw on your cuestion the anserw is in this post and you not search -.- or question is out of topic.

[nfzeta007]

not sure if this is already in forum but u don't have to reinstall client to take npc given SOS item off ur char u just go back to the patcher and patch the default ip address

[sal91]

hi everyone i have a noob question. when you use this bot are you suppose to see your character?
i got everyting working out and i see on ibot that my char is killing and collecting and using evertyihng just like i set up. i am just wondering if i am suppose to see my char doing the stuff or just read? please let me know thanks.

[xplorer88]

hi guyz..how u guyz can download the ibot latest?i try to download the ibot from ibotforfun.blogspot.com but the links not working. any 1 can upload the ibot program here?plzz plzz T.T i'm so bored here without ibot..

<-----cannot download..(sad)

[bible black]

Hi i got the bot to start working and everything but one problem arises, the town script wont' start, when the bot tele back to town it just stand there and won't turn to npc or anything.

[NOTaLEAKER]

Normally I don't post here, but I'm having the same exact issue(started tonight sometime). Char finishes training then scrolls, afterwards she just stands in Jang at spawn spot using Grass Walk, still a no go after pressing "Start Bot" and making sure "Don't Loop" wasn't checked. I'm really at a loss at this point so I posted here after looking at tons of sites/blogs/forums for an answer. Hope you can help...


Regards,
Justin