.
Suggestions ( 10 Votes/s )
[1]
Quote:
Originally Posted by hussert
Quote:
Originally Posted by soniblaks
It would be better if you make the programm to press faster on connect becaus every time it are free slots it waits 1/2 seconds!
Iam thinking of making it even faster in the release ... though it wont be easy ... until then try the 0 refresh rate value ... thats the Fastest that it could get ...
[2]
Quote:
Originally Posted by hussert
Quote:
Originally Posted by karimbomba
it needs , if possible , an image verification writer , so if it didn't login , it'll retry without needin me doin it
I tried to do it , Honestly ...
I just dont have any idea about how to Script That into my program ...
.
Problems ( 8 Vote/s ) ( So far , All Complaining about the Sro Server List )
[1]
Quote:
Originally Posted by hussert
Quote:
Originally Posted by xMedeia
Just a question, How'd you get the serverlist working.. cuz mine just won't go.
If you are facing Problems with the Sro Server List ( especially Disconnected problem ) then try and use v1.0.0.4 instead of v1.0.0.5 that you are currently using ( the version Number is written in properties of the Server list itself ... File Version ... )
Password of the v1.0.0.4 File : silkroad.3dn.ru
.
Rumata's FileFront Link to Server List v1.0.0.4 :
.
Quote:
* IMPORTANT *
NO OFF-TOPIC QUESTION. Sorry but I cant afford to Discuss every single problem about every single program used with LogSro like Silkroad and Sro Server List. Unless you can find the Solution to your problem in the FAQs here, Please Search for the best place/thread to ask in. Thanx
Please Check The FAQs ( Down Below ) BEFORE REPLYING if you have any PROBLEMS With LogSro
Quote:
( 8 )
Answered Question/s Were Added
>> Related to the Current Version of LogSro <<
( See FAQs Section )
[quote]
Quote:
Edited Board
.
Note : If this is not your first time reading this thread then I would say keep an eye on this Board every time you enter the thread. Otherwise , please read this whole first post ... Thanx
I imagined that it would be annoying for other readers to search for the Edited things in my first post everytime I have edited Something and putted new info ... This Board will do the Trick Hopefully. ( The Board will only show the last 10 points Edited )
Quote:
[3] Less Activity !! in my Thread
I just want to say this to every LogSro User ...
I will be less Active in June Due to Important Exams coming up ... So I will only Check the thread twice or maybe 3 times a day until the end of June .... v2.0 will be still under progress ... Iam almost done with it ... just 2 or 3 Days at most ...
To everyone : Please , Hang up there if you replied with a Question and expected me to answer it ... or Hopefully another user will help ya instead of me ...
To Mods : Please , Dont Close Down the Thread for June ... as I mentioned before , I will only be less Active ... Thats all ...
Quote:
[2] Bug Report !! in LogSro v1.2
Server "Venice" is written mistakenly " Venince " in LogSro ... Just change it Manually to " Venice" and then LogSro will remember it for the next times ... I will fix that permenantly with the next release ...
Quote:
[1] Upcoming !! LogSro v2.0
v2.0 :
- Option ( New Server ) : Add/adjust a Server Name
( Adjusting ? : as the Tag (NEW) might be removed from the Sro Server list )
- Fixing ( Zero Refresh Rate Value )
- Tutorial Video!! ( will be about v2.0 )
- Status : To Show the info of the Server that LogSro is Trying to get in
- ?????? : I will leave talking about this until the updates are finished. ( a Surprise maybe ?!? )
- Any more Suggestions ?
* Updates delayed Due to further ideas were Suggested
Quote:
~~~ Released ~~~
... LogSro v1.2 ...
~~ Fixed Several Bugs ~~
- Fixed Function prasing Error -
- Fixed "Fastest !!" Mode ( When Refresh Rate = 0 ) -
- Fixed Problem : hits Confirm immediately when try a second time -
- Hotkeys Changed to Alt instead of Shift -
- Removed Hotkey for "Stop Script " as it Caused problems -
Quote:
LogSro Tutorial Video
YouTube - LogSro v1.2 - The Sro Auto-Login Script -
Still , I prefer you reply here more than in Youtube ... I even look at thread more often than Youtube. Just in case you wanted a faster reply for your comment ...
Enjoy !!
----> Option ( Server Name ) : Choose your Server Name that you wish to Login to. Special Thanks to nedtheone
----> Option ( Free Slot No. ) : Choose your Minimum Value of free slots at Which The Script will Hit Confim. Special Thanks to nedtheone
----> Opition ( Save Settings ) : The Script will remember your Settings for the next time you use it.
-----> Board ( Records ) : Just a small Board that Calculate you the total time and tries preformed to Login.
-----> Option ( New Refresh Rate Option ) : In addition to the option of Custom Refresh Rate , The New "Fastest !! " Option is Added. ( This Option can be active if the Refresh Rate Value = 0 ).
-----> ( New Look ) : The window of the were modified dramatically to become more handy.A New Designed Front Image by FrankkkoJ was Added. Special Thanks to FrankkkoJ
-----> ( Hot Keys ) : as well as the tool works with Buttons like the older version, Hot Keys were Added to make things more softer.
HotKeys :
Start Script = Alt + Z
Save Settings = Alt + S
Stop Script = REMOVED
Quote:
Releases
In This Section I will List out the Log of the Version of LogSro. You can Check here the moment
you enter this Thread for further Versions releases and Info.
Quote:
* v1.2 : 18-May-2008
- Fixed "Fastest !!" Mode ( When Refresh Rate = 0 )
- Fixed Problem : hits Confirm immediately when try a second time
- HotKeys Changed to Alt instead of Shift
- Removed Hot Key for "Stop Script" Due to Problems
Quote:
* v1.1 : 17-May-2008
- ALL LIMITS/BUGS FROM LAST VERSION WERE FIXED
- Option , Server Name. Helped with by nedtheone
- Option ,Free Slot No. Helped with by nedtheone
- Opition ,Save Settings
- Records Board
- New Refresh Rate Option , " Fastest !! "
- New Look. Helped with by FrankkkoJ.
- Hot Keys
Quote:
* v1.0.1 : 11-May-2008
- 1st Loop Function Completed
- 5 Limits Presented
- 1st Time LogSro is Posted The Thread
Quote:
* v1.0.0 : 7-May-2008
- Tool Formed ( GUI/Window Designed )
- No Loop Function
Quote:
*1st Thought : 4-May-2008
- Idea Presented in Youtube
- No Actual Form
Quote:
LogSro
v1.2
The Next Release of The AutoIt Script, LogSro. v1.2 is way more Updated and fixed than the older version , V1.0. Supporting all Resolutions and Computers Schemes unlike the older version. The Updating took me 6 days as Iam still Learning in AutoIt.
First , Before I start with the Guide , I would like to Thanks Everyone for the records of the last Version, v1.0.1 . Thanks for , over 3000 Views , over 100 replies , about 300 Downloads and most importantly for the THANKS. ( 30 Thanks were for this first post recorded before the release of the new version ).
Quote:
FIRST ,
MAKE SURE THAT YOUR SILKROAD WINDOW NAME IS " SRO_Client "
WHEN USING SroLog.
THE NAME COULD BE CHANGED IF YOU WERE A No-Dc Client or whatever you have from programs there that changes the name of the Client
Here we Go :
1- Obviously ,Download the tool ( see Links Below ) and Extract them anywhere you like.
2- Launch The Tool and fill in your Details. ( Server Name, Free Slot No. & refresh Rate )
* LogSro will remember those Values if you either pressing the Save Settings Button Which what was Saved Exactly or Closing the window manually.
* IMPORTANT :
If the Value of the refresh rate was set to 0 the Script will Swift to the Option " Fastest !! ".
You may not know this, The Sro Server List is Capable of refreshing VERY FAST even faster than my Script When set to 0.0000001 . This can activated by pressing Alt+r While The List on Sight. Basically what this Hot Key do is Pressing the refresh Button So many times that your pc starts to sound the usual annoying sound of holding un invalid/unusable key.
Simply my "Fastest !!" Option is using that hot key and also wait for the moment to Login. ( Tip : to mute that annoying sound of that Alt+r , try hitting on the window of the serverlist. Especially on the Scroll )
Iam not sure if my Script can deal fine with that Alt+r.In fact , I didnt give that version a lot of test checks. Hopefully , I wont have to release a newer version because of a small bug/mistake.
3- Launch The Sro Server List by Rumata. ( if you dont have it already, then you can find an OFFICIAL link to it in LogSro itself in Downloads )
4- launch Sro ( I recommend you use either Testosterone or the No-Dc Client to avoid Disconection. You can find in Downloads as well if you dont have them already )
5- Type in your Account ID, Password & Image Code Normally as the game starts.
* I could have made my Script do the typing ID and PSS , However , I think most users wont be comfortable with it thinking that it might steal it or something like that.
6- I recommend you "Save Settings" of LogSro before hitting Start Script as it makes sure that the Variables are correct and in place.
7- Alt+Tab until you make LogSro and the Server list both visible.
* Dont worry about covering the Confirm button in this Release. LogSro now switch to the window of the Game and send "Enter" immediately instead of mouse clicking. Just make sure you have typed the image code correctly.
8- Finally , "Start Script"
* The moment you press that a timer will start to count in LogSro.( Dont worry , it wont affect the process of the tool ). Not only that you wont see it as it counts up , but also that it wont record the estimated time in the record board until an "Enter" is sent i.e. an actual try to Login is preformed. Also a basic Counter of the No. of Tries is increasing by 1 each time you try to Login.
This Record Board is very important. Its just tell you how long it did took you Login. Keep in mind that the interrupted Attempts to Login are not counted ( i.e. if you stopped the Script of anything similier to that ). Also that time counter is showing you theTotal time for all tries preformed.The Record Board is reset everytime you Launch LogSro. Thats why its Outsides the Settings Range.
9- I didnt have the chance to try the tool enough times it took me great time to Script and design it all over again. I hope there will be no Bugs/mistakes as it being used by various users. And if there was , I will wait for reasonable amount of replies in order to collect all Bugs/mistakes in one newer release.
Thanks For Reading And Using LogSro
.
Quote:
Bugs
In this section I will show you the Bugs of the Current version of LogSro. In the same time, I will try my best to remove as many of them as I can within a week. AutoIt is full of things to figure out. Please feel free to reply about any bug or mistake you find in LogSro After you read the presented Errors first. This is very inportant as it will help me develop a better Version for you, guys.
Quote:
Server " Venince " ?!?!?
Server "Venice" is written mistakenly " Venince " in LogSro ... Just change it Manually to " Venice" and then LogSro will remember it for the next times ... I will fix that permenantly with the next release ...
Quote:
FAQs
The Questions & the Answer to them are actually taken from same Thread . Those and some from other related threads. I think they are the most asked Questions by the reader about The Current version of LogSro.
This Section is Always under frequently Updates as I will add any Useful Question Asked as a normal reply in this thread. The Question will be first answered as a normal reply .
I wil put a note in the end of that reply after the answer to it , if it will be added here in this Section.
Then, After few minutes, you will see it here , in this FAQs Section.
I HIGHLY RECOMMEND READING THIS FIRST POST BEFORE REPLYING HERE WITH YOUR PROBLEM.
=========================
[1] Question :
Quote:
Originally Posted by mrdiddly
i get the firus allert with server list 2. its not a virus, i know that. im still trying to use it but it says that Windows cant access it and i dont have permission to access this file. im still trying to get that figured out...
Answer :
Quote:
Originally Posted by stressless
Even than, i still cant use it, i cant open it
EDIT: right click on it, and press run as!!! than it works !!!!
**************************
[2] Question :
Quote:
Originally Posted by xMedeia
Does it work with softmod?
Answer :
Quote:
Originally Posted by SpriGgy
sure it works with SM ^^
**************************
[3] Question :
Quote:
Originally Posted by Velska
WHere i can download Sro Server List ??
Answer :
Quote:
Originally Posted by hussert
You can find it in the "Downloads" Button in my tool itself.
**************************
[4] Question :
Quote:
Originally Posted by Hit_Man_2
the serverlist thing doesnt work cuase it says disconnected not talking about game talking about server list i dont know what im doing wrong but the server list doesnt work please tell me how i can make it work ty.
Answer :
Quote:
Quote:
Originally Posted by xMedeia
I restarted my computer, working again now =)
OR ( from other Thread )
Quote:
Originally Posted by ferdylols
hm... just try with server list to manually refresh it a couple of times then it will work.. i had the same prob just restart the program pres a couple of times refresh then it will work.. maybe net frame 3.0?
If Still no good , Then reply with your problem in Rumata Serverlist Thread :
[Tool] serverlist.exe 1.0.0.5a
Please , Dont Spam me with this problem ... Those two Solution above is all I know ... ask Rumata , The author of the server list , if it didnt work with you ...
**************************
[5] Question :
Quote:
Originally Posted by soniblaks
have some questions ....
1)When i open server liist I get an error k2:Reader: Cant open file C;Program FilesSilkroadmedia.pk2, error = 3 and when I press ok it enters me in the list.Why?
2)What resolution are compatible with this script?
3)the silkroad window must be full screen or ide scress if i choose a 600X800 resolution?
4)when I start the script, the server list and the autologin program must pe in front of the silkroad?
Pls answer me quicky! THANKS!
Answer :
Quote:
Originally Posted by hussert
1) I had that Error before... I dont know why its an error even because it get you back to the list normally .. to get rid of that error , put the server list Files ( I think there only two ) in the same folder of Silkroad.
2) Support all resolution ... I think I mentioned that in the first.
3) Doesn't matter....
4) yes , Exactly ...
**************************
[6] Question :
Quote:
Originally Posted by grundig
here is wat i did:
i did everything to stage 4
then, i opened rumata's loader n sro opened.
i typed my account info n the image code
i alt tabbed to save settings on logsro
i alt tabbed again for server list
i started the script then the server list kept saying connecting
then, wen the server had 2497/2500 slots n my slot to log in was for *2*
it didnt do anything.
it didnt go to sro windows to confirm...please help
Answer :
Quote:
Originally Posted by hussert
I checked if that was true or not ... nope , the Script is fine ..
Try to slowing down your refreshing rate ... your Reply is very good to me as give many details that lets me to give a definite answer ... I hope that anyone facing a problem would reply like that.
**************************
[7] Question :
Quote:
Originally Posted by soniblaks
It doesnt work... I followed all the insructions and it doesn't presses connect when it are free plces... I use the last version-->v.1.2 Can u pls make a video with a tutorial pls... I really want to use your tool but it doesn't work. I dont know what I doesn't do correctly. PLS help!
Answer :
Quote:
Originally Posted by hussert
I can understand from you that the tool IS pressing refresh. However, not pressing Confirm when there is free places. Try to slow down the refresh rate .. And MAKE SURE THAT YOUR SILKROAD WINDOW IS NAMED " SRO_Client " ... Maybe you are using a No-Dc Client and that would change your Silkroad window name ...
About the tut Video, I will try and make one when the tool is in its final form , i.e. No Limits !!
**************************
[8] Question :
Quote:
Originally Posted by chinesekid1444
i cant open server list because of virus and i ran it as admin for vista but still not working
Answer :
Quote:
Originally Posted by hussert
your antivirus think that the server is very dangerous because of some files that act like an virus except for they got no side effects , Hopefully Iam right about that ...
unless you turn off or remove that antivirus , you will not be able to Extract them ... I use Norton Anti-Virus if you asked me ... it says nothing about it ... maybe its not very good , but at least I can Extract the Serverlist with it ON ..
.
Quote:
Links
NO SMART REPLIES about that I didnt do anything big or special with that new tool as it mainly depends on Rumata's Sro Server List. You can count it as a plugin/extension to Sro Server List. STILL , BIG THANKS TO RUMATA FOR HIS HARD WORKS !!
NO ASKING FOR NEW LINKS REPLIES. Iam already providing you with two free to download mirrors.
NO REPLIES ABOUT RISKY VIRUSES. Everyone is familiar with the fact that some botting/hack files used for silkroad is containing some viruses. I KNOW THAT THERE IS A TROJAN EVEN!!. However they wont damage your pc as far as everyone using them says.
NO OFF-TOPIC QUESTION. Sorry but I cant afford to Discuss every single problem about every single program used with LogSro like Silkroad and Sro Server List. Unless you can find the Solution to your problem in the FAQs here, Please Search for the best place/thread to ask in. Thanx
.
* FileFront * -----> Download v1.2
.
* NowUpload * -----> Download v1.2
** VirusTotal Scan Report ** -----> LogSro v1.2 Scan Report
Quote:
* IMPORTANT *
PLEASE DONT SPAM ME WITH REPLIES ABOUT VIRUSES , MY TOOL'S SAFETY WAS ALREADY CONFIRMED BY THE MOD , InvincibleNoOB. PLEASE DONT REPLY ME WITH SCAN REPORTS OR SCREAMING ABOUT TROJAN OR WHATEVER ...
SAFETY ALREADY CONFIRMED !!
Quote:
Originally Posted by InvincibleNoOB
It's clean,you've got my confirmation.
+ Three other Mods , SpriGgy & Strukel & Frankko , Thanked me for this post
.
Quote:
It WORKS !!
Those are the replies from people who got the Currnet Version of LogSro to Work FINE !!
Thanx for using LogSro ... and I will still work out a better Version to make it works with everyone !!
[1]
Quote:
Originally Posted by xMedeia
Nice work with v1.2
And really, lots of respect for your work..
Working perfectly .. Great job
[2]
Quote:
Originally Posted by grundig
thnx man, it works
i had 6 tries
[3]
Quote:
Originally Posted by yeeeaa
wow now it works perfectly ty for this great tool !!
Quote:
Originally Posted by tommeke227
Nice finaly you made it to work
[4]
Quote:
Originally Posted by lllxlll
Work softh and fine tanks
[5]
Quote:
Originally Posted by hemagoku
ya i downloaded ur latest ,its better the the old one ,i got it first try lol xD i was so happy ,thanks
[7]
Quote:
Originally Posted by soniblaks
Thanks alot bro... It finally works an presses te confirm button! thanks!
[8]
Quote:
Originally Posted by poffka
yeah it work for me too .... dont know what a bug was before ,but now it works .... grats for u dude
[9]
Quote:
Originally Posted by momo1903
Thanx man it works ( mayby you can make faster refresh :P )
[10]
Quote:
Originally Posted by WhiteAngel10
THANK'S MAN!!! YOU'RE THE BEST EVER!!! I MEAN REALLY REALLY THE BEST EVER!!! NOT ONLY THAT YOU'RE GOOD ON AUTO IT BUT YOU GOT SO MUCH PATIENCE!!!!! I MEAN LOL , LOOK HOW MANY PAGES THERE ARE AND HOW MANY QUESTIONS AND YOU ANSWERED ALL OF THEM!!! EVEN IF THEY WERE SAME QUESTIONS!!!
[11]
Quote:
Originally Posted by camel1816
omg dude u rock so much xD
my 1st try and it worked^^
[12]
Quote:
Originally Posted by riku100
It works Perfectly thanks Hussert ^^ ... this tool rockz
[13]
Quote:
Originally Posted by liltruco
thnx man it works great before i could not login now i can thnx to yu thnx for all your help ^^
[14]
Quote:
Originally Posted by juffyt
O M G u ROCK This need too go too Stiky =) Tnx Alot one of the best tools in ElitePvpErs WOW i Dont need to buy premiun ^^
[15]
Quote:
Originally Posted by rikun123
thanks i tried it it worked, ur the best hussert!!!!! xD
THANX TO ALL WHO HAVE TRIED LogSro & Replied
.
THINK HELPED ALOT
