[Release] RRaidBot (Big and Mini Raid)

[Nonge_II]

Deutsch :

Ich habe den Raid bot ein wenig verändert , so dass er bei jedem laufen sollte
englisch :
I have offered the raid changed a bit, so it should run on any

- Refresh and f5 pressing delect 
- more time when the bot open the group

[KILLERNUMBER11]

Originally Posted by Nonge_II

Deutsch :

Ich habe den Raid bot ein wenig verändert , so dass er bei jedem laufen sollte
englisch :
I have offered the raid changed a bit, so it should run on any

- Refresh and f5 pressing delect 
- more time when the bot open the group

habe dein bot ausprobiert läuft bei mir aber leider nicht klickt immer zwischen hp balken und minimap hin und her .
Habe allerdings von einem bekannten gehört das der super läuft

Originally Posted by reems1986

i have a lil problem... when i join the little raid my ship drive arround but didnt target or attack any sunburst... it follows them only with the cursor on the minimap and when its out of looking range the ship start moving. when amaterasu comes the cursor klicks only on his position at the minimap but didnt move to him

i set the keys for attack, toggle, ... ect as shown in post 1 but it didnt work for me.

anyone have an idea whats wrong?

you have take in line 56 select miniraid

[cepillo]

Hi, I have a problem:
When I connect the bot, my boat only moves to a coordinate, remains stationary and does not shoot any sunburts.
Can anyone tell me what I wrong??
thanks

[Seafighter.DE3]

Ich habe im moment das Problem, dass der Bot nur einen einzigen Sunburst schießt und von dem Zeitpunkt an nichts mehr macht...er bleibt dann einfach stehen und macht gar nichts mehr bis sich das Schiff irgendwann von alleine auslogt.

Kann mir da einer helfen?

[londoneza]

The bot iti work good until he make that refresh and after grup îs not fond.how i can resolve this problem because he donat work.that îs only problem if think are many users whit this problem.

[reems1986]

Originally Posted by KILLERNUMBER11

you have take in line 56 select miniraid

hab das geändert.... allerdings funktioniert er immer noch nicht gut..... jetzt fährt er über die karte und schießt ab und zu die sunburst an die auf seinem kurs liegen. wenn das schiff den zielpunkt erreicht und dort zufällig gerade ein sunburst ist schießt er ihn auch.... kommt der dicke raus macht der bot gar nichts.... keine platten kein pulver keine e muni.... er klickt nur auf die mini map um ihn zu lokalisieren und versucht dann neben den dicken zu klicken was er nicht schafft..... ( klickt immer nur direkt auf Amaterasu fährt aber nicht zu ihm)

[trolleras9]

Originally Posted by londoneza

The bot iti work good until he make that refresh and after grup îs not fond.how i can resolve this problem because he donat work.that îs only problem if think are many users whit this problem.

nonge in an above post, uploaded rraidbot v1.6 without group problem
why dont you give it a try?

[londoneza]

I try to use nonge raidbot but îs bad for me because i Was sunk and dont reconect .and yes i delete all memories.so îs wroung somewhere

[reems1986]

i tried the changed version from nonge and it works verry well.... is there any possiblility to add an function to " shoot only npcs with 100% hp" or " engage only moving npcs" to avoid problems with other players on raid map?

[coolboy972]

this message in scardivi what is problem and bot do not star

HP has been found via Colour at 9,386

SeaChart AutoDefined: x1 = 1024, y1 = 801, x2 = 1823, y2 = 1387.
If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined: x1 = 873, y1 = 165, x2 = 962, y2 = 254
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 406, repy = 704
If your RepButton is NOT at this position, please use manual define.

[jarit]

Originally Posted by coolboy972

HP has been found via Colour at 9,386

SeaChart AutoDefined: x1 = 1024, y1 = 801, x2 = 1823, y2 = 1387.
If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined: x1 = 873, y1 = 165, x2 = 962, y2 = 254
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 406, repy = 704
If your RepButton is NOT at this position, please use manual define.

This isnt a problem, the bot only show, where it find the map, mini map, hp and repair button.

[Nazas]

I have a littel problem with the repair button!
He ever try to repait but there is nothing to repair

[KILLERNUMBER11]

Originally Posted by Nazas

I have a littel problem with the repair button!
He ever try to repait but there is nothing to repair

mhh select the repair button manual in line 34 from true to false
and write the coordinates of the rep button in line 83+84

[adm.mateusz]

0%-loadning fx resources???

[gulisek]

im sunk why dont recconect and jump on behe?