My general rule of thumb for cheating is DON'T RUIN THE GAME FOR OTHERS.
Chapter one: Equipment
One of the main things that you will need to start DMA cheating is the actual DMA card I would personally recommend the PCIe SCREAMER SQUIRREL (link at the bottom of the page) because creating firmware on it is pretty straight forward, and it is supported by PCie LeachFPGA which is what the cheats usally run off of. Next, if you want aimbot you will want a KM-BOX NET, which basically spoofs mouse movement and clicks. I will not recommend a fuser (which lets you put a esp/cheat overlay on your main monitor) as they are NOT necessary. The most important thing you will need is a seperate windows 10/11 laptop or desktop computer to run your cheats off of. You will also need a burner wifi card or some other functional PCIe x1 card that you will never use again to make firmware with.
NOTE-Laptop users, Find a m.2 PCIe to PCIe x1 adapter for your DMA card/burner card as you cannot plug most dma cards into a m.2 slot (m.2 slot is where your ssds go) Of course, there are some DMA cards that have thunderbolt port compatibility, so if your laptop has a thunderbolt port use one of those. (I linked my favorite m.2 dma and thunderbolt dma at the bottom)
Firmware- A rule of thumb when in need of firmware, is to never buy it. Buying the firmware will might make it so you will get banned WAYYYY faster (depending on how the seller made it, you never really know) Just make your own firmware. It looks intimidating, but is really is not. I will not go into detail on making firmware, but I've attached a really helpful guide to do so.
KMBOX Setup- I feel like the Km-Box is the hardest thing to set up do to as it being a chinese product. I will not go over this process as on their website, they have a guide which you can follow to set up the kmbox pretty stright forward. Here is my guide - Use the two included blue USB cables:
• One cable connects the KMBox Net “Net port” to your second/cheat PC.
• The other cable connects the KMBox Net “Controlled PC” port to your main/gaming PC.
- Plug your gaming mouse into the KMBox Net’s **Mouse USB port**.
- KMBox Net “Net port” (top‑left USB port) → connects to the **cheat/second PC**
- KMBox Net “Controlled PC” port (bottom‑left USB port) → connects to the **gaming/main PC**
- KMBox Net “Mouse” port (top‑right USB port) → your **gaming mouse**
- **Single-PC mode**: both blue cables go to the same PC (cheat & game together), plus mouse port to your mouse
- On the cheat PC, after plugging in the KMBox, you should see a new USB Ethernet adapter or virtual CD.
- Run the WCHUSBNIC driver installer as Administrator.
- Reboot that PC after installation completes.
- Open Control Panel → Network and Internet → Network Connections (or run ncpa.cpl).
- Find the “USB 2.0 Ethernet Adapter” created by the driver.
- Right‑click → Properties:
• Uncheck IPv6.
• For IPv4, configure a static IP:
IP address: 192.168.2.100
Subnet mask: 255.255.255.0
Leave DNS/gateway fields blank.
- On the second PC, open Command Prompt and run:
ping 192.168.2.188
(Replace `.188` with the IP shown on your KMBox display.)
- Successful replies indicate proper network connectivity.
The IP and port and UUID displayed on the KMbox net is what you add to your cheaat or cheat software
(If you are making your own cheat there is a KMBOX-Net python lib and C++ lib)
Setting Up your DMA Card-
Turn off your game pc
plug in the board
Connect the USB from the data port to the cheat pc
Start your game pc and go into BIOS (changes depending on motherboard)
Disable Virtualization (INTEL)
Disable VT-d
Disable Virtualization (AMD)
Disable IQMMU (AMD CBS > NBIO Common Options > NB Configuration > IOMMU)
Disable NX-Bit (if available, CPU Settings Secure Virtual Machine)
Disable Secure Boot (if the option is greyed out, clear all keys)
Set PCI slot of DMA from Auto to Gen1 (Advanced > PCI Settings)
Save BIOS settings and boot your main PC into Windows.
Boot your second PC into Windows.
You should see "FTDI FT601 USB 3.0 Bridge Device" in Device Manager -> Universal Serial Bus controllers on the second PC.
(thanks PorkCheatDev!
)Thats all for my guide links are below. If I missed anything, or any of this info is incorrect, let me know! Thanks for reading and happy cheating!
