How to make your server non-hamachi!

[killersub]

Originally Posted by zzdaddyzz

Dynamic DNS = The DNS you just created at DynDNS.Com

Internal IP = Your IP of the computer you are running the server on, This can be found by going to Start, then Run. Typing in CMD, once the Windows command Prompt opens type in "ipconfig". You will get a readout the one you are looking for is "Ip Address" it normally starts with 192.

External IP = You outbound ip assigned by your ISP. You can find this by visiting What Is My IP Address? - IP Address Lookup, Bandwidth Speed Test, IP Info, plus more.

1. Go to cmd and type in Ipconfig
2. Copy your Default Gateway Ip to your browser.
3. Go to Advance Settings and login. Or even it will say it. Find portforwarding anyway.
4. Add ports such as 3306... and add your listenport which is located in your server files in ACCServer - config.

Then your done.

I hope you all Enjoy non-hamachi hosted server,If you have problems, post in this thread! Thanks would be appreciated :P

i dont understand this whole part do help me
msn:
help me afap as fast as porseble

Internal Ip= to find this go to,start>run>cmd>type in "ipconfig", hit enter,and a WHOLE list would show there... go to the very top if you have a wireless or ethernet... and find IpV4 Address or IpV6 address (something like those)...and that's your INTERNAL IP

External Ip= not much explanation for this one but to say,go here>>> <<<and it will say YOUR external IP at the very top...

Dynamic DNS=when you go to >>> <<< and create an account,login,go to "add host services",create YOUR host(make up a name,put in the Ip you wanna use in the bar "Ip Address"(remember it),leave everything else the same and then hit "add to cart",then just keep clicking "next" until your at the page where it says the host YOU created...(that's your "Dynamic DNS")

1. Go to start>run>cmd>and type in "ipconfig" hit enter... <<<<follow that...

2. Copy your Default Gateway Ip to your browser...(it's usually at the top if you can't find it under YOUR IP ADDRESS...USUALLY starting with 192....and then open up your internet and in your address bar type in those numbers and hit enter...) <<<<follow that

3. the next page should come up... if it asks you for a username and password you should ask your mom or dad...OR usually its username=admin and password=admin... then once in the page of your router/modem find there..."virtual server" or "port-forward" or keep finding around there until you find a page with like 20 boxes boxes blank... and THAT'S your port-forward page...

4. Add the ports you want to port forward... maybe start with 3306... but in this part your gonna have to think HARD and work HARD if you want your server non-hamachi...well I currently have a conquer online private server...so,I port-forwarded these ports:3306,9958,5816,9870,8653,and 9865...hope this guide helped!

[stheeke]

Kann das wer auf Deutsch übersetzen?

[DEADP00L]

english please so we are able to help you better

[t.revisdabest]

Originally Posted by DiobloSlayeR

PartOne:

1. Open your Internet Browser. (Firefox. Internet Explorer.)
2. Go to DynDNS.Com and create and account if you don't already have one.
3. Log In, and click on the "Services" tab.
4. Now, Click on Dynamic DNS.
5. Click on Create Host.
6. Fill out the fields. Leave everything default except wildcard. Make sure it's checked.
7. Click add host, and your done with part one.

PartTwo:

1. Go to Start. Then Run.
2. Type. C:\Windows\System32\Drivers\Etc\
3. This will open a folder, Click on Host.file and open it with Notepad/Wordpad.
4. At the end of the file add the following.

CODE
127.0.0.1 (Dynamic DNS)
(Internal IP) (Dynamic DNS)
(External IP) (Dynamic DNS)

Dynamic DNS = The DNS you just created at DynDNS.Com

Internal IP = Your IP of the computer you are running the server on, This can be found by going to Start, then Run. Typing in CMD, once the Windows command Prompt opens type in "ipconfig". You will get a readout the one you are looking for is "Ip Address" it normally starts with 192.

External IP = You outbound ip assigned by your ISP. You can find this by visiting .

1. Go to cmd and type in Ipconfig
2. Copy your Default Gateway Ip to your browser.
3. Go to Advance Settings and login. Or even it will say it. Find portforwarding anyway.
4. Add ports such as 3306... and add your listenport which is located in your server files in ACCServer - config.

Then your done.

I hope you all Enjoy non-hamachi hosted server,If you have problems, post in this thread! Thanks would be appreciated :P

This to me doesn't really make any sence because like half the stuff you say isn't even on the Dynamic DNS.If you can im me at that be koolz cu i rlly dnt under stand it at all.

[Underground Gaming Leader]

Originally Posted by t.revisdabest

This to me doesn't really make any sence because like half the stuff you say isn't even on the Dynamic DNS.If you can im me at that be koolz cu i rlly dnt under stand it at all.

Mainly because most of the stuff has to do with stuff in your computer , and router , hostfile....

[t.revisdabest]

Originally Posted by Underground Gaming Leader

Mainly because most of the stuff has to do with stuff in your computer , and router , hostfile....

Okay i got it all done but okay now wut do i put in for the server like do i just do account server? or do game server 2?.If can im me at

[MegaCheater]

THanks now i got free Dbs in conque ronline :===))

thanks alot +k for ffree Dbs =)

[trapureja123]

2. Copy your Default Gateway Ip to your browser.
3. Go to Advance Settings and login. Or even it will say it. Find portforwarding anyway.
Ive got a prob with this over here.
If i enter the Default Gateway Ip and hit enter it says sumthing like this:Webpage on adress Demands Username and password. Webpage says: "TP-LINK Wireless Router WR541G/542G"
Sry for my not so best englishXD

[CyberServer]

use admin as id and admin as password dude try it

[SpeedCo]

thx

[conaniriku]

Originally Posted by DiobloSlayeR

1. Go to cmd and type in Ipconfig
2. Copy your Default Gateway Ip to your browser.
3. Go to Advance Settings and login. Or even it will say it. Find portforwarding anyway.
4. Add ports such as 3306... and add your listenport which is located in your server files in ACCServer - config.

I dont really understand this part can you help me?

thanks!

[koreng]

ok.. my turn for u all to check it..
i got static ip actually.. and server is running..but i want to learn how possible to use dynamic ip..

1. web is can be done by this guide.. i made it successfully
2. at web pages we can see the server is on status
3. i can play it at my pc (server pc)
4. others can see the web
4. others cannot play the game

this is my internal ip at the router

my server lan ip is 10.10.10.3

this is my external ip


this my setting at port forwarding


maybe something missing.. what ever u want to know i will upload the pic..

-koreng-

[King_Arthur]

Originally Posted by koreng

ok.. my turn for u all to check it..
i got static ip actually.. and server is running..but i want to learn how possible to use dynamic ip..

1. web is can be done by this guide.. i made it successfully
2. at web pages we can see the server is on status
3. i can play it at my pc (server pc)
4. others can see the web
4. others cannot play the game

Check
\GameServer\config.ini
\GameServer\shell.ini
\GameServer\shell.dat
\ACCServer\config.ini

and make sure that every ip field but DB_IP is pointing at your external IP (218.111.23.87) and not your internal (10.10.10.3) address.

[koreng]

please help me to check it out..

[Eurion]

Your second image, shell.dat, you cant edit it with notepad, it corrupts the file. You must hex edit that file. Also your account ip, game server ip and your master ip, are all pointing to your internal ip. They need to be pointed to your external ip (218.111.23.87).