[Selling] PHANTOM OVERLAY COUNTER STRIKE 2 CHEAT 👻 EXTERNAL | SECURE | ESP/AIM/TRIGGER | MISC

[zebleer]

Originally Posted by nomorals

hey @zebleer I hit you up on the PO website I was drunk last night and accidentally bought 2x cs2 keys at once, hoping you can sort it out for me lol.

If you made a support ticket it's already been handled or is about to be. Absolutely we can refund the second purchase just make sure you made a ticket

Originally Posted by Weedfotze

Would it be possible to add a grenade helper that is showing you where to stand when throwing nades? So you can add your own smokes, flashes, etc. and don't have to memorize them?

Throwable ESP is already in my cheat (showing where throwables are so you can avoid them) but what you are describing I think is different. That would probably be easier to do internally. Certainly possible externally but I do not believe I will be adding that

[ryanmax59]

ESP works fine, but this is the worst aimbot I have ever used in a video game. It moves 1 inch per 10 seconds and is therefore worthless.

[GermanShooterHvH]

cant wait to test i have been using his COD cheats and they are amazing never got banned or called out while using his cheats time to buy cs2 cheat csgo doesnt have good anticheat like COD so dont worry with his product you wont get banned

forum username anoo21

[zebleer]

Originally Posted by ryanmax59

ESP works fine, but this is the worst aimbot I have ever used in a video game. It moves 1 inch per 10 seconds and is therefore worthless.

It sounds like you need to configure your aimbot settings. The default settings don't work well for everyone

Here is a very detailed guide: https://www.phantomoverlay.io/forums...heating-guide/

If reading a guide isn't something you want to do, here is some advice I have that is quick (click spoiler below)

 Spoiler

1. Make sure your aimbot is on. This means it's toggled "ON" and you also set an aimbot hotkey. Then the aimbot will be active when you hold your hotkey. Your hotkey can be something like thumb mouse or even your shoot key

2. Make sure your ESP is centered. If it's off center, I have a fix for that here and you'll want to fix that before expecting aimbot to perform well: https://www.phantomoverlay.io/cs2-help/

3. Now to the configuration which is what I think your issue is,

a. You want to lower your smoothness a bit if you want a quick aimbot. Maybe to something like ~4
b. You want to raise your sensitivity a little. Do it in small increments until it's right
c. For your case I'd recommend turning "lock" on
d. Lower curve and retarget time
e. Higher FOV
f. Make sure aim from recoil is on and select "Neck" as your target bone

Warning to you, make sure you do not minimize or maximize these values. Then the aimbot is just going to go crazy. Gradually lower or raise each one until you get the performance you desire

Originally Posted by GermanShooterHvH

cant wait to test i have been using his COD cheats and they are amazing never got banned or called out while using his cheats time to buy cs2 cheat csgo doesnt have good anticheat like COD so dont worry with his product you wont get banned

forum username anoo21

Thank you I really appreciate the kind words!

[ryanmax59]

Originally Posted by zebleer

It sounds like you need to configure your aimbot settings. The default settings don't work well for everyone

Here is a very detailed guide:

If reading a guide isn't something you want to do, here is some advice I have that is quick (click spoiler below)

 Spoiler

1. Make sure your aimbot is on. This means it's toggled "ON" and you also set an aimbot hotkey. Then the aimbot will be active when you hold your hotkey. Your hotkey can be something like thumb mouse or even your shoot key

2. Make sure your ESP is centered. If it's off center, I have a fix for that here and you'll want to fix that before expecting aimbot to perform well:

3. Now to the configuration which is what I think your issue is,

a. You want to lower your smoothness a bit if you want a quick aimbot. Maybe to something like ~6
b. You want to raise your sensitivity a little. Do it in small increments until it's right
c. For your case I'd recommend turning "lock" on
d. Lower curve and retarget time
e. Higher FOV
f. Make sure aim from recoil is on and select "Neck" as your target bone

Warning to you, make sure you do not minimize or maximize these values. Then the aimbot is just going to go crazy. Gradually lower or raise each one until you get the performance you desire

Thank you I really appreciate the kind words!

I have followed these steps, tried every possible combination. The aimbot moves at 1 inch per 10 seconds. I assume this is something you have implemented to prevent detection, but this is completely unusable.

EDIT: I have found "decent" settings, but it is not consistent with the guide.

[zebleer]

Originally Posted by ryanmax59

I have followed these steps, tried every possible combination. The aimbot moves at 1 inch per 10 seconds. I assume this is something you have implemented to prevent detection, but this is completely unusable.

EDIT: I have found "decent" settings, but it is not consistent with the guide.

The aimbot can be as strong as you want it to be. I tell my users how to configure it to stay safe but I don't force them to do anything. If you want to make the aimbot instant lock to enemies you can do that if you want

So you telling me it "moves at 1 inch per 10 seconds" clearly tells me that something is wrong with your configuration

I think you maxed out or minimized some setting that messed your config up

Do not do minimums or maximums. Reboot your PC inject again to get the default config. Raise sensitivity a tiny bit, just a few moves, and lower smooth a tiny bit, just a few moves

Then lower retarget time just a few moves as well and raise FOV a few moves

Turn aim at occluded on. Normally I wouldn't recommend this but for you I do

After that, you should have a very powerful aimbot

If you still have issues, message me on Telegram by pasting this link into a browser: t.me/PhantomOverlay

I will send you a picture of a complete config to try out

Originally Posted by ryanmax59

I have followed these steps, tried every possible combination. The aimbot moves at 1 inch per 10 seconds. I assume this is something you have implemented to prevent detection, but this is completely unusable.

EDIT: I have found "decent" settings, but it is not consistent with the guide.

Hey sorry to message you again but I sent you an aimbot config in DM. I'm sure you'll like it

[ryanmax59]

Originally Posted by zebleer

The aimbot can be as strong as you want it to be. I tell my users how to configure it to stay safe but I don't force them to do anything. If you want to make the aimbot instant lock to enemies you can do that if you want

So you telling me it "moves at 1 inch per 10 seconds" clearly tells me that something is wrong with your configuration

I think you maxed out or minimized some setting that messed your config up

Do not do minimums or maximums. Reboot your PC inject again to get the default config. Raise sensitivity a tiny bit, just a few moves, and lower smooth a tiny bit, just a few moves

Then lower retarget time just a few moves as well and raise FOV a few moves

Turn aim at occluded on. Normally I wouldn't recommend this but for you I do

After that, you should have a very powerful aimbot

If you still have issues, message me on Telegram by pasting this link into a browser: t.me/PhantomOverlay

I will send you a picture of a complete config to try out


Hey sorry to message you again but I sent you an aimbot config in DM. I'm sure you'll like it

I appreciate your quick responses. I was maxing out which was causing issues as you mentioned, the settings you sent are working much better. Thank you

[zebleer]

Originally Posted by ryanmax59

I appreciate your quick responses. I was maxing out which was causing issues as you mentioned, the settings you sent are working much better. Thank you

Like I said in pm you were actually onto something. I made a mistake with my last algo change & the aimbot has been very weak the last 24 hours. Fixed it. Aimbot strong again

[ryanmax59]

Confirmed - issue is fixed! Thank you

[Edelweiss4]

hey. some people say that PO cheese causes problems in most Win10 versions. Did you fix this?

[dixonkaa]

clicked on the pay option and i got the following messages:

The owner of this website () has banned you temporarily from accessing this website.

[lestherAQP]

Hi Zebbler.
I have used a different configuration of your AIM, I have been with bots for more than 30 minutes and in the end I am sad, the aimbot in this product is something bad, it misses the vast majority of shots at medium and long distance, it is only good at short distance.

I would like to know if a refund is possible?
I actually paid because I liked your video with AIM but when using it myself it doesn't feel like the video.

ESP works well but I think AIM has a lot of room for improvement.

MY PO ID is: likanotainy, I have created a ticket, I hope we come to good terms, thank you.

[vezfxv]

Very solid cheat, safe and great for legit play.

[zebleer]

Originally Posted by Edelweiss4

hey. some people say that PO cheese causes problems in most Win10 versions. Did you fix this?

No issues are caused. Also you can use any version including 22H2. What they are referring to is that you have to uninstall the latest 4 KB Windows updates (which won't change your version it will stay 22H2)

This is an easy process but if you don't want to do it, not to worry. In about a week all PO users will be able to resume Windows updates without ever needing to pause them again

Originally Posted by dixonkaa

clicked on the pay option and i got the following messages:

The owner of this website (www.phantomoverlay.io) has banned you temporarily from accessing this website.

I was getting hammered with a really bad DDOS attack. I had to implement some rate limiting rules that hit legitimate users such as yourself. I have corrected these rules & you should be okay now!

Originally Posted by lestherAQP

Hi Zebbler.
I have used a different configuration of your AIM, I have been with bots for more than 30 minutes and in the end I am sad, the aimbot in this product is something bad, it misses the vast majority of shots at medium and long distance, it is only good at short distance.

I would like to know if a refund is possible?
I actually paid because I liked your video with AIM but when using it myself it doesn't feel like the video.

ESP works well but I think AIM has a lot of room for improvement.

MY PO ID is: likanotainy, I have created a ticket, I hope we come to good terms, thank you.

Yes you can get a refund but I can assure you that the PO aimbot is very powerful. I would guarantee that if you are missing shots, it is a configuration issue. I am hopeful you will accept our help in re-configuring your aimbot, but a refund is of course allowed

[ofir88]

mmmm.....