unlock fps

_fobos_ · 05/30/2009, 10:51

Quote:

Originally Posted by isostar

It's probably not so easy, considering noone has posted anything about unlocked fps for a long time. People don't want to mess with adresses and something they know nothing about if you know what I mean. I know I'm a noob at it too, but at least I put some effort in it and made it. And I know for a fact that people want it.

lmao, i posted this ages ago.. it is that easy.
if u want to unlock it all you do is change the JNB to jmp, but i rather raise the limit which you can see in the example.
you put great effort in following a guide lol.

Anyway now you know how to do it yourself instead of just changing addresses.
but yea you dont have to believe me i dont even see why i bothered to respond, you ask if someone knows how to do it and then say its not that easy lol.
My multiclients used this, up untill recently when I had no time for it anymore.
about people wanting it, it sounds 'cool' thats why people want it, if you have a ****** graphic card this still wont help you out.
and 30-40 frames per second is enough for a game like this.
also note the " per second " part? wonder what the sleep api is for?

Trippinshrumes · 06/02/2009, 18:52

personally. i couldnt find it using search for all intermodules....

my way...

open conquer.exe in olly dbg
right click and searchfor - name in all modules

type sleep

push enter right away

double click the second line u see...

now scroll up a few lines and theres all the lines there talking about

lol... my noob *** way to find it :P

Dark-Zero · 10/15/2009, 21:01

when i press enter after type sleep i found this :

Code:

004BA554   . FF15 A8E06000  CALL DWORD PTR DS:[<&KERNEL32.Sleep>]    ; \Sleep
004BA55A     EB 19          JMP SHORT Conquer.004BA575
004BA55C     A3 E00C6900    MOV DWORD PTR DS:[690CE0],EAX

it was already jmp... i guess this way dont work for 5173 :/

can u help me to unlock fps for patch 5173?

this is conquer.exe for patch 5173..

Naun1331 · 10/16/2009, 18:22

I did what you said got a 120 max jumps from 72-120 which is nice befor this i was using the other 1 which would only get it to 99 plus they just patched it so if u used the 1 the other guy put together u cant log on.

xpnoiboix · 10/19/2009, 10:04

Quote:
Originally Posted by _fobos_
1) Load conquer.exe in OllyDbg.
2) Right click and hover over Search for -> select all Intermodulair calls.
3) Type Sleep and double click that address
4) Patch:
Code:
 00482F07             /73 0E                JNB SHORT Conquer.00482F17
into:
Code:
00482F07             /EB 0E                JMP SHORT Conquer.00482F17
This will unlock your fps as your treadtitle asks for.

to change the limit just some higher

follow step 1, 2, 3

and instead of patching the jnb to jmp you patch:
Code:
00482F02              8D51 19              LEA EDX,DWORD PTR DS:[ECX+19]
00482F0B              83C1 19              ADD ECX,19
into:
Code:
00482F02              8D51 14              LEA EDX,DWORD PTR DS:[ECX+14]
00482F0B              83C1 14              ADD ECX,14
(as you can see changed 19 into 14, you could experiment some but i suggest not to go lower then 13/14 )

does this work for Qonquer 3 Also??

lorenzo214 · 06/23/2010, 20:07

how do you make the patch? or save the changes?

Hey can anyone do it for LastHope Co please? this guy is a ******* genius moderator lol i cant seem to get it to work

unknow1989 · 06/28/2010, 19:13

I try it with odbg110 but no chance. Can some1 help me, how can i unlock my Fps in Conquer online. I can´t find the right Path

smallvllle · 11/08/2010, 01:24

i do these steps exactly like you say and cant find the lines you are posting... this is what i see when i do every step

smallvllle · 03/20/2011, 19:31

Quote:
Originally Posted by _fobos_
1) Load conquer.exe in OllyDbg.
2) Right click and hover over Search for -> select all Intermodulair calls.
3) Type Sleep and double click that address
4) Patch:
Code:
 00482F07             /73 0E                JNB SHORT Conquer.00482F17
into:
Code:
00482F07             /EB 0E                JMP SHORT Conquer.00482F17
This will unlock your fps as your treadtitle asks for.

to change the limit just some higher

follow step 1, 2, 3

and instead of patching the jnb to jmp you patch:
Code:
00482F02              8D51 19              LEA EDX,DWORD PTR DS:[ECX+19]
00482F0B              83C1 19              ADD ECX,19
into:
Code:
00482F02              8D51 14              LEA EDX,DWORD PTR DS:[ECX+14]
00482F0B              83C1 14              ADD ECX,14
(as you can see changed 19 into 14, you could experiment some but i suggest not to go lower then 13/14 )

i did this and there is no address that starts with 004

TomasLT · 03/20/2011, 23:59

dont look at address. on different mashine address can be different. And i think its old thread and old method so it dont works.

try this 1:

Quote:
Originally Posted by *M*
Ok, so I was looking back in to unlocking framerate for someone, and the old JNB-JMP method still works the same but the unfortunate side effect is that 100% of the resources go into that unlocked client, slowing down the rest of the PC.

The proper way to do it is to set the framerate the same as the refresh rate, as most people have a screen that runs at 60Hz, I have attached a 60fps client for Patch 5363.

REINFORCE: THERE IS NO POINT IN GETTING 100+ FPS IF YOU ONLY HAVE A SCREEN THAT RUNS AT 60Hz(most lcd's on the market)

Here is the patch, you can usually find this code segment by searching the .text code section of conquer for ADD ECX,19:

Original
Code:
CPU Disasm
Address   Hex dump          Command                                  Comments
005823BD  /.  E8 F3B01800   CALL <JMP.&WINMM.timeGetTime>
005823C2  |.  8B0D D0568D00 MOV ECX,DWORD PTR DS:[8D56D0]
005823C8      8D51 19       LEA EDX,[ECX+19]
005823CB  |.  3BC2          CMP EAX,EDX
005823CD  |.  73 0E         JNB SHORT 005823DD
005823CF  |.  2BC8          SUB ECX,EAX
005823D1      83C1 19       ADD ECX,19
005823D4  |.  51            PUSH ECX
005823D5  |.  FF15 E4907D00 CALL DWORD PTR DS:[<&KERNEL32.Sleep>]
005823DB  |.  EB 19         JMP SHORT 005823F6
005823DD  |>  A3 D0568D00   MOV DWORD PTR DS:[8D56D0],EAX
005823E2  |.  A1 CC568D00   MOV EAX,DWORD PTR DS:[8D56CC]
005823E7  |.  6A 01         PUSH 1                                   ; /Arg1 = 1
005823E9  |.  8D48 40       LEA ECX,[EAX+40]                         ; |
005823EC  |.  E8 ED440000   CALL 005868DE                            ; \Conquer.005868DE
005823F1  |.  E8 E7EDFFFF   CALL 005811DD                            ; [Conquer.005811DD
005823F6  |>  6A 01         PUSH 1
005823F8  |.  58            POP EAX
005823F9  \.  C2 0400       RETN 4
Patched
Code:
CPU Disasm
Address   Hex dump          Command                                  Comments
005823BD  /.  E8 F3B01800   CALL <JMP.&WINMM.timeGetTime>
005823C2  |.  8B0D D0568D00 MOV ECX,DWORD PTR DS:[8D56D0]
005823C8  |.  8D51 10       LEA EDX,[ECX+10]
005823CB  |.  3BC2          CMP EAX,EDX
005823CD  |.  73 0E         JNB SHORT 005823DD
005823CF      90            NOP
005823D0      90            NOP
005823D1      90            NOP
005823D2      31C9          XOR ECX,ECX
005823D4  |.  51            PUSH ECX
005823D5  |.  FF15 E4907D00 CALL DWORD PTR DS:[<&KERNEL32.Sleep>]
005823DB  |.  EB 19         JMP SHORT 005823F6
005823DD  |>  A3 D0568D00   MOV DWORD PTR DS:[8D56D0],EAX
005823E2  |.  A1 CC568D00   MOV EAX,DWORD PTR DS:[8D56CC]
005823E7  |.  6A 01         PUSH 1                                   ; /Arg1 = 1
005823E9  |.  8D48 40       LEA ECX,[EAX+40]                         ; |
005823EC  |.  E8 ED440000   CALL 005868DE                            ; \Conquer_[60-FPS].005868DE
005823F1  |.  E8 E7EDFFFF   CALL 005811DD                            ; [Conquer_[60-FPS].005811DD
005823F6  |>  6A 01         PUSH 1
005823F8  |.  58            POP EAX
005823F9  \.  C2 0400       RETN 4
By NOPing out SUB ECX,EAX and ADD ECX,19 and replacing it with XOR ECX,ECX (set ECX to zero), we can exploit the code above to set the frame limit. By changing the 19 in LEA EDX,[ECX+19], you will change how often the conditional jump below runs the code to sleep.

Numbers below 19 = increase in framerate (I used 10 in this example, giving roughly 60 FPS)
Numbers above 19 = decrease in framerate (decreasing framerate has its uses, while TG or botting for example you can set fps to one. On my pc this resulted in 1% usage of GPU, and 4% of CPU)

smallvllle · 03/21/2011, 18:26

can some1 just plz make a patch for me ill giv u a thanks -.-

TomasLT · 03/21/2011, 23:57

Maybe tomorow. Time to sleep now

lokosinho0 · 04/20/2011, 22:46

i can't find Type sleep help me plis

itzCareBear · 04/26/2011, 02:51

how do you save this so its saves wut you changed into your conquer file

~~[PeterGriffin]~~ · 04/27/2011, 10:44

Just use a good ISP,and youre done!