Official V3n0M Thread

[iliveoncaffiene]

Originally Posted by Queen-Of-Evil

One of the reasons I stopd using MSN is that it allows peaple into your computer while bypassing the firewall, and the HD Drive thing,,, I had that happen aswell remember, just stop using MSN for a week and see how much the problems stop.

*****! Are you seriously that paranoid?!
All msnmsgr does is forward/open a UDP port using the UPnP protocol. UDP ports are not used by any trojan or any type of windows shell that would allow access to your computer.
And FYI, any program connected to the internet bypasses your firewall, and in a sense, does the same thing as MSN. There is no threat from it because telnet (remote command-line interface) operates through the TCP protocol. Even if you leave that port open, there is no real threat by doing so.

[Queen-Of-Evil]

Originally Posted by iliveoncaffiene

*****! Are you seriously that paranoid?!
All msnmsgr does is forward/open a UDP port using the UPnP protocol. UDP ports are not used by any trojan or any type of windows shell that would allow access to your computer.
And FYI, any program connected to the internet bypasses your firewall, and in a sense, does the same thing as MSN. There is no threat from it because telnet (remote command-line interface) operates through the TCP protocol. Even if you leave that port open, there is no real threat by doing so.

Except for when you go to transfers files using MSN the 2 computers establish a direct link so you can see the other persons I.P. address, which for a person who likes to keep there privacy, and knows he's being targeted, is no good. From a I.P. address he's vulnerable to Smurf, DOS and LAND attacks,,, because even WITH a firewall it makes no diffrence with LAND attacks because the entire network speed is still affected ^^ with the same Vecna scan you can see if the persons using a Gnutella client by the listening port, and using a Telnet client you CAN comprimise a Gnutella P2P users computer security, the topic is discused at PacketStorm about the dangers of Limewire, Kazaa and Gnutella p2p Programs.

[iliveoncaffiene]

Then why not stop using the p2p programs while on MSN? Or simply use a web-messenger like
OR, just don't transfer files through MSN...

[Question]

Originally Posted by BERNABE

Omg.. after editing my server.dat file.. as i open my conquer.. it will say an error message "server.dat file is damage, please reinstall your conquer" bullshit what is happening!

you prolly need *M*'s conquer.exe.it has the server check bypass so you dont get that error

[imthatnugga]

k 1st off queen you ****** rock and your work is truly awe inspiring 2nd what r people using/doing for autopotting and DC on low dura? any help is greatly appreciated

[deathermination]

Originally Posted by Queen-Of-Evil

Except for when you go to transfers files using MSN the 2 computers establish a direct link so you can see the other persons I.P. address, which for a person who likes to keep there privacy, and knows he's being targeted, is no good. From a I.P. address he's vulnerable to Smurf, DOS and LAND attacks,,, because even WITH a firewall it makes no diffrence with LAND attacks because the entire network speed is still affected ^^ with the same Vecna scan you can see if the persons using a Gnutella client by the listening port, and using a Telnet client you CAN comprimise a Gnutella P2P users computer security, the topic is discused at PacketStorm about the dangers of Limewire, Kazaa and Gnutella p2p Programs.

when i try to install venom i get microsoft error1601 disabling me from installing it how do i fix this

[BERNABE]

Originally Posted by grashnob

Ok, here's a little guide for everyone with a problem.
First, here is my v3n0m01.ini:

localloginport=9958
localmapport=5816
remoteloginport=9958
remoteloginip=69.59.142.13  <-- 1
proxyip=127.0.2.1               <-- 2
consoleout=yes
logfile=coproxy.log
filter=0x3ee

The two lines indicated with arrow 1 and arrow 2 are most important. The second line should be 127.0.2.1, the first one should be your original server IP. To illustrate this, let's take a look at thes 3 randomly chosen servers fron the Server.dat file:

Server1=Kylin
Ip1=127.0.2.1   <----
Port1=9958
ServerName1=Kylin
HintWord1= 
Pic1=servericon78

Server2=Cerberus
Ip2=216.93.174.65   <----
Port2=9958
ServerName2=Cerberus
HintWord2=
Pic2=servericon79

Server3=Jupiter
Ip3=69.59.142.13   <----
Port3=9958
ServerName3=Jupiter
HintWord3=
Pic3=servericon20

The lines with the arrows are the server ip's. Copy past that ip over the first indicated line in v3n0m01.ini and then replace it with 127.0.2.1 so it will look like this:

Server3=Jupiter
Ip3=127.0.2.1 <----
Port3=9958
ServerName3=Jupiter
HintWord3=
Pic3=servericon20

If you have any questions, read this post again, if you still have questions, Don't question me

Oh and Queen I was wondering if there was a way to let this thing not pick up normal and refined items..

this is what i did:
Server.dat

Server5=BeautyandBeast
Ip5=127.0.2.1
Port5=9958
ServerName5=BeautyandBeast
HintWord5=
Pic5=servericon70

v3nom.ini:

localloginport=9958
localmapport=5816
remoteloginport=9958
remoteloginip=216.93.174.65
proxyip=127.0.2.1
consoleout=yes
logfile=coproxy.log
filter=0x3ee

I have *M* multiclient already and still it wont work...... and i did follow all instructions... how come it wont work.... I already extracted the EgyCO-V3n0M-4357-Build1 to the conquer folder and i already downloaded and installed the required applications needed(.Net.......etc.) Am i the only person having this problem?

[iamironman]

could you explain the autohunt feature? does it dc you on low dura? how do i get it to kill monsters, it just seems to warp from point to point

[raptordin]

Originally Posted by iamironman

could you explain the autohunt feature? does it dc you on low dura? how do i get it to kill monsters, it just seems to warp from point to point

It doesn't DC on low Dura so be careful.

You have to use non range weapons with autohunt
it will warp you to the monsters exact location then hit it
with area weapons it is not that good,
so don't use clubs or hooks, use swords, blades, daggers, ....etc. any weapon wih no ranged area of attack will do.

[dnox]

tks

[Queen-Of-Evil]

Originally Posted by imthatnugga

k 1st off queen you ****** rock and your work is truly awe inspiring 2nd what r people using/doing for autopotting and DC on low dura? any help is greatly appreciated

I Always used to use Co2M8 for Autopot but I dont think it works with 4357 atm.

@ Peaple with Install problems, Please read the first page, its VERY Easy to install,,, if your Struggling your either not reading the first page properly or havnt the faintest idea how to edit server.dat and ini files correctly for your server, 80pc of posts in this thread ask the same qiuestion over and over and over and i sick of answering the same question cause peaple dont bother reading whats there already.

*Edit, yes it works for patch 4357 and it works with SS ^^

[COFan83]

ok i have downloaded all needed progs...and extracted proxy to main co folder.Tried both .exes in proxy pack,no installer appeared.I play on Nanya.so what am i doing wrong?Doesnt work yet .when i open venom lite.ip is correct for my server.And i tried all IPs you told i should (your 1st post)including my own.

[Queen-Of-Evil]

Originally Posted by COFan83

ok i have downloaded all needed progs...and extracted proxy to main co folder.Tried both .exes in proxy pack,no installer appeared.I play on Nanya.so what am i doing wrong?Doesnt work yet .when i open venom lite.ip is correct for my server.And i tried all IPs you told i should (your 1st post)including my own.

Have you considerd it is working ^^ If you can Run the V3n0M-Lite.exe and see the Dos Command Promt style window then V3n0M is running, then you WILL have to edit your server.dat file, find your server in it and change the i.p. in your servers details to 127.0.2.1 yw

[BERNABE]

Originally Posted by COFan83

ok i have downloaded all needed progs...and extracted proxy to main co folder.Tried both .exes in proxy pack,no installer appeared.I play on Nanya.so what am i doing wrong?Doesnt work yet .when i open venom lite.ip is correct for my server.And i tried all IPs you told i should (your 1st post)including my own.

we have the same problem but i can open the venom-lite.exe ... so wat is our problems?

[Queen-Of-Evil]

Originally Posted by BERNABE

we have the same problem but i can open the venom-lite.exe ... so wat is our problems?

Download all the needed .Net and J# links in first post, and dont just download, INSTALL them, restart computer and itll work fine.