CIDProxy

[_Emme_]

This is not working o.0 . This is what I do,replacing evrything in my CO folder,open server.dat and change the ip of my server to 216.93.179.221 , then start CIDProxy then Conquer,and try to write !dc , not getting dced. tryed to do fbot,not doing anything. also tryed to open co b4 then CID Proxy,not working. CIDProxy dosnt even know i started the client cuz where level and server and stuffs are there are nothing there.

[GoldenSinX]

Originally Posted by emildayan1

This is not working o.0 . This is what I do,replacing evrything in my CO folder,open server.dat and change the ip of my server to 216.93.179.221 , then start CIDProxy then Conquer,and try to write !dc , not getting dced. tryed to do fbot,not doing anything. also tryed to open co b4 then CID Proxy,not working. CIDProxy dosnt even know i started the client cuz where level and server and stuffs are there are nothing there.

Erm I think your supposed to leave your server's IP to 127.0.0.1 (Local Host) otherwise how would you let the Proxy load up your character etc..?

[666django]

Can someone explain how to aimbot cause this is the first time.Like i hit autoshoot when it isnt on and ss/fb bot.Then use tornado o.O someone help me out

[cjainy]

well 666django you don't make any sense to me, but.
type in !fbot seleect tornado right click on your target jump around and don't die.
simple as that

[elitepenguin]

hi, I should be doing everything right. Files were extracted to the correct conquer folder. I start CID 1st. and it runs fine. However when I click on play.exe I get the conquer loading screen then nothing happens after that. the login screen doesn't show.

If i click on the conquer.exe file that was extracted from your download. I get the following error:

Conquer.exe - entry Point Not Found
X The procedure entry point. ?GetFontWidth@CMyBitmap@@SAKPBDH@Z could not be located in the dynamic link library graphic.dll.

I'm sorry if this is an easy fix. but I have no idea. hope you can help me out.
thanks in advance.

[KingLeo]

Ive seem to have run into a problem :\, extracted all the stuffs and evrything, but when i open CID in the proxy its wrote,
[Time]Error: 9958 is already in use
[Time]Error setup up sockts
i gots no idea how to fix it :\
any help? xD

[cjainy]

Originally Posted by elitepenguin

hi, I should be doing everything right. Files were extracted to the correct conquer folder. I start CID 1st. and it runs fine. However when I click on play.exe I get the conquer loading screen then nothing happens after that. the login screen doesn't show.

If i click on the conquer.exe file that was extracted from your download. I get the following error:

Conquer.exe - entry Point Not Found
X The procedure entry point. ?GetFontWidth@CMyBitmap@@SAKPBDH@Z could not be located in the dynamic link library graphic.dll.

I'm sorry if this is an easy fix. but I have no idea. hope you can help me out.
thanks in advance.

hm tried running play first?

[cjainy]

Please, superman00 read this part again a few times look for the !offlinetg command.. there's a bit of extra info in there for you.. already answering how it works and what it does.. etc.

To type command you would do
!command [arg]

Commands
nbot - Turn on Tornado bot (use Tornado to target person (must use twice))
ssbot - Use tornado to target the person, and scentsword will automatically hit them after, when th jump (you must have Scent Sword...)
metspam - Record Items and meteors by unpacking scrolls of meteors and the items (note: must be equal amount of each)
money [amount] - Withdraw [amount] from the nearest warehouse. (You have to have the money)
refresh - Turn refresh on and off
fbot - Turn on Fast Blade bot. Use tornado to target the person.
amine - Turn on Automine (This will start mining, and kill all monsters nearby)
repair - Repair All items (You need correct stats to re-equip them)
dc - Disconnect
offlinetg - Disconnects your game from the proxy, but keeps it logged on in Training Grounds (Please read Note 1 about this)
rg - Jump over right gate
lg - Jump over left gate
jump - Jump to any x,y coordinate (within 16 spaces (or 14?))
name [original name] [new name] - Change a persons name when you see them. (Read note 2)
fk - Speak this to the targeted name, and it will follow and atack them
f - Speak this to targeted name, and it will start following them
exitprox - Exit Proxy
rc - Record 2 attack packets
rp - Repeat the recorded attack packets
timer [amount] - Set the timer for autohunt, autoloot, nbot, sbot, etc to [amount] milis
c - Turn cyclone on/off
c2 - Turn dhcyclone on and off
aloot - Turn on auto loot
ahunt - Turn on auto hunt
equip [slot] - Equip item in certain slot (Read note 3)
asit - Turn auto sit on/off
mesh [id] - Spawn a monster with [id] mesh.
act [id] - Run an action
ashoot - Turn auto shooting on/off for fastblade/scentsword (ON BY DEFAULT)
spam [target] [text] - Spam a target (Example: "!spam All Hellooo" will spam in talk, but if u do "!spam RandomName Hellooooo" it will spam in whisper)
wh - Open nearest warehouse (Click on the NPC first please)
awalk - Turn walk aiming on or off (if FALSE, will not aimbot when a person walks) (FALSE BY DEFAULT)
[B]
How scatter bot works[/B]
!scatter record - Record location (JUMP AROUND AND scatter as you want the bot to do it!!)
!timer 800 - Set the timer to 800 so it doesn't jump too fast.
!scatter start - Start the scatter bot
!scatter off - Stop the scatter bot
(You have to manually equip arrows! - Ill add a function later to re-equip arrows)

Note1: This is an experimental feature. Please only use it in Training Grounds (NOT OFFLINE)
How this works: It disconnects your client, leaving character connected to Proxy-Server. If you exit the proxy, the character will exit as well.

note2: This is to prove to GMs that Videos are useless. You can type a users name suc as !name test cookies Will rename any character by the name test to cookies. (Shows up when killed, talking, but you cannot whisper him!)

note3: To equip, first type the command like !equip 5. The item recorder will start, record the NEXT ITEM YOU PLACE IN YOUR INVENTORY, and try and equip it. This is only useful for people such as warriors and archers... or Trojans who want dual BS.





[B]Window Interface:
Functions[/B]

    * Log Seen Gms - Log any gms that the character saw, and their location
    * Log Deaths - Log all deaths occured by the character (not yet implemented)
    * Run a command:
          o Run any command on the character (Use prefix please (prefix is #))
    * Autopickup Options
          o All - Picks up everything listen in the items.ini
          o Unique - Picks up only Unique
          o Elite - Picks up only Elite
          o Super - Picks up Only Super
          o Specific - Picks up items specified in item_specific.ini
    * Monster Hunting
          o You can make it hunt monsters between what levels you wish
          o You can set so it hunts no bosses (listed in bosses.ini)
          o Specific Monster Only - Hunt only for the specified monster
          o Hunt All Monsters - As it says
    * Disconnect on
          o All - Disconnects on all Players
          o Blue - Disconnect on Blue name players
          o Red - Disconnect on red name players
          o Gm/PM - Disconnect on GM/PMs
          o Specific - Disconnect on items listed in the box (Items must be separated by a comma
    * D/C on low Dura - Will disconnect if durability is below 2. (not yet implemented)
    * Item Spoof (Gift Bags)
          o Make items on ground look like giftbags. Has Refined,Unique,Elite,Super options.

Exrtra default options:
You can view ghost chat.
:/ i think there are others, but imjust forgetting them




INSTRUCTIONS FOR INSTALLING:
Extract the zip in your conquer online folder. (Make sure conquer is closed)
Start the proxy from your conquer folder (you can make a shortcut to the desktop for it)
Login and play.


If, for some reason you have errors, please post a thread with the error, and a way to replicate it.


The proxy is automaticallly set to get your server ip and local ip, so all you have to do is extract it in your CO folder.

[XxDarkKillaxX]

i was wondering so if u only have super picked for autoloot will it still pick up mets and dbs?

[L3r0y~J3nk1n$]

Originally Posted by raptordin

Wow. Tooo nice to be true.

That's what I think.

Originally Posted by *M*

Just out of curiosity, how much do you make per ad?

Hopefully that's the only reason this was released, and not another mass hacking spree.

Originally Posted by Heddskott

CID7? I dont know why I get that to the same person as NET7

It's the same person.

[666django]

so this aim is only for taos?cause my fber doesnt have tornado(this is my first time aiming xD)

[superman00]

"this application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem." when i click ok this pops up

Java Runtime Enviroment Not found. i have installed it from 2nd page post yet i still get this. anyway to fix this? id love to try this


@cjainy lol yea i saw that just after i posted it

[Secret Weapon]

The tornado will show up in your skills after you've activated the aimbot, either fbot or ssbot, regardless of class.

[richardpv92]

Well i have a simple question. Ugh so what if I am already using a different bot? It's Venom and if i install this one, do i have to uninstall venom in order for this bot to work?

[HunterKiller]

Originally Posted by superman00

"this application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem." when i click ok this pops up

Java Runtime Enviroment Not found. i have installed it from 2nd page post yet i still get this. anyway to fix this? id love to try this


@cjainy lol yea i saw that just after i posted it

Just go on google.. and download the MSVCR71.dll and extract it in ->->-> C:\WINDOWS\system32 and thats all