TG Archer Scatter with Bow Lvler

[Peanut]

V2 AVAILABLE ON PAGE 2

I WANTED TO LEAVE V1 FOR THOSE THAT WANT THE SIMPLER PROGRAM
SO ORIGINAL IS AS FOLLOWS...


My first real contribution to this forum...

Basically there is about a second between scatter hits. This program uses the time between scatters to hit a stake 3 or 4 times, and therefore level your bow exp at the same time and a little more exp for leveling your archer as well.

It is very basic program no bells and wistles, but it works well. It is window coordinate based so insure zoom and window settings are correct. If your char moves instead of just lvling, something is not set correctly.

Setup:

-Your scatter needs to be fixed so that you can assume the normal tg leveling position. Centered between to scarecrows and about 1 to 2 steps strait down. So that you can hit four stakes across the bottom and still hit the two closest scarecrows with the same scatter.
-Your window has to be 1024X768.
-Shift screen is off
-Zoomed out to max lvl (no external zoom programs)
-Once started you can not touch the mouse, type, or anything till the macro is stopped!
-Start exe file
-Click the Conquer 2.0 window you want to use it in to make it active.
-press [Control] t to start
-press [Control] y to stop

Nice thing is if the tg is really crowded or even just a few archers you can't even tell there are extra hits happening unless you look really close.

Remember once started dont touch nuthing, this is for AFK leveling only, and only with the Conquer 2.0 window active and showing.

+k would be nice if you like this simple program.

I do have another program close to finished, if this one goes well I might upload the other as well.

Oops...here is the file.

[S3AN]

hmm ill wait for the scan

[nestea]

Her is the scan ....
TG_Archer_lvler.rar scan...

File "TG_Archer_lvler.rar" received on 05.24.2007 at 15:10:37 (CET) is being scanned by VirusTotal in this moment. Results will be shown as they're generated.

Antivirus Version Update Result
AhnLab-V3 2007.5.24.0 05.23.2007 no virus found
AntiVir 7.4.0.27 05.24.2007 no virus found
Authentium 4.93.8 05.23.2007 no virus found
Avast 4.7.997.0 05.24.2007 no virus found
AVG 7.5.0.467 05.23.2007 no virus found
BitDefender 7.2 05.24.2007 no virus found
CAT-QuickHeal 9.00 05.24.2007 no virus found
ClamAV devel-20070416 05.24.2007 no virus found
DrWeb 4.33 05.24.2007 no virus found
eSafe 7.0.15.0 05.24.2007 suspicious Trojan/Worm
eTrust-Vet 30.7.3660 05.24.2007 no virus found
Ewido 4.0 05.24.2007 no virus found
FileAdvisor 1 05.24.2007 no virus found
Fortinet 2.85.0.0 05.24.2007 no virus found
F-Prot 4.3.2.48 05.23.2007 no virus found
F-Secure 6.70.13030.0 05.24.2007 no virus found
Ikarus T3.1.1.8 05.24.2007 no virus found
Kaspersky 4.0.2.24 05.24.2007 no virus found
McAfee 5037 05.23.2007 no virus found
Microsoft 1.2503 05.22.2007 no virus found
NOD32v2 2289 05.24.2007 no virus found
Norman 5.80.02 05.24.2007 no virus found
Panda 9.0.0.4 05.24.2007 Suspicious file
Prevx1 V2 05.24.2007 no virus found
Sophos 4.17.0 05.23.2007 no virus found
Sunbelt 2.2.907.0 05.24.2007 no virus found
Symantec 10 05.24.2007 no virus found
TheHacker 6.1.6.121 05.23.2007 no virus found
VBA32 3.12.0 05.23.2007 no virus found

Aditional Information
File size: 297567 bytes
MD5: 6c79f910d2f39aeced90b3779e790664
SHA1: 0de6a00d90cf89b631b85e8f7e1f5e3844a9896e

Filename: TG Archer lvler.exe
Size (Bytes): 371453
MD5 Hash: a1de7c72a932dc9fe33b59b58a8f9114

AntiVirus Engine Version Definition Version Status
Antivir 7.4.0.15 6.38.1.87 Nothing found
ArcaVir 1.0.4 2006.01.27 Nothing found
Avast 1.0.7 0738-1 Nothing found
AVG 7.5.45 269.6.2/787 Nothing found
BitDefender 7.60825 7.60825 Nothing found
ClamAV 43 3204 Nothing found
F-Prot 4.6.6 3.16.14 Nothing found
Norman 5.70.01 5.70.01 Nothing found
Rising 17.00.00.36 19.21.00.00 Nothing found
VirusBlokAda32 3.11.4 2007.05.03 Nothing found
VirusBuster 4.3.23:9 (2007-02-16) 9.75.7/11.0 Nothing found

[kkaosbudbud]

what program did you use to make this?

[Peanut]

Originally posted by kkaosbudbud@May 24 2007, 11:33
what program did you use to make this?

AutoHotKey

Whole program took like 10 lines of input.

i can upload the .ahk file for those that have the program and would rather do it that way.

[pokey2]

Can you show us a screenshot of where to stand?

[Peanut]

Originally posted by pokey2@May 26 2007, 03:24
Can you show us a screenshot of where to stand?

Stand Here



<hr>Append on May 26 2007, 20:58<hr> Something is wrong here. I got over 50 downloads and no feedback on how it works or possible improvments and no karma.

Please if you use the program let me know what you think.

Also, if you use it regularly and enjoy it, push the +k please. I wanna know if this is helping people or if i should just give up on the programing thing.

[_Trinity_]

Nice macro dude but I already have my own

//edit//

btw always tell people what program you used to make it if you're not suppling source code... Would help for the scanners

Scanned with my own panda and norton, zonealarm doesn't alarm it's clean

[sonybaci]

cool program +k

[Peanut]

Originally posted by _Trinity_@May 26 2007, 14:11
Nice macro dude but I already have my own

//edit//

btw always tell people what program you used to make it if you're not suppling source code... Would help for the scanners

Scanned with my own panda and norton, zonealarm doesn't alarm it's clean

Will do thanks for the tip.

[brikin101]

Originally posted by Peanut+May 26 2007, 20:44--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Peanut @ May 26 2007, 20:44)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin--pokey2@May 26 2007, 03:24
Can you show us a screenshot of where to stand?

Stand Here



<hr>Append on May 26 2007, 20:58<hr> Something is wrong here. I got over 50 downloads and no feedback on how it works or possible improvments and no karma.

Please if you use the program let me know what you think.

Also, if you use it regularly and enjoy it, push the +k please. I wanna know if this is helping people or if i should just give up on the programing thing. [/b][/quote]
thx I am new to this sight and just got to downloading some of the stuff but great work and +k to you

[dejablue]

yep i like it +k dude

[scar98]

Please upload the .ahk file.

Some people might want to change a line or two...

[Peanut]

Originally posted by scar98@May 29 2007, 17:30
Please upload the .ahk file.

Some people might want to change a line or two...

Here is the V1 AHK file...V2 as soon as I get time to complete it. Trying to get a working fail safe so if you archer moves it will auto log off or correct the position or just switch to scatter only. Keep the +k going if you enjoy the program.

I think putting your archer on peace mode might help in the mean time but not sure.

[minty331]

NICE! But I still can't get this to work lol.

I open this up and CO, but i'm confused by "Once started you can not touch the mouse, type, or anything till the macro is stopped!"

So do i bring archer to TG then open this up or what?

Thanks for answering in advance