ELSE - multi-class ControlClick bot

[evanxxxm]

Schattenlord@
it will be the XPspam slot
it clicks that F-slot every 5-10 seconds, which have the effect of reloading ur arrows

[DarkNgo92]

nice prog

[gbylj]

nice work!

The paws images rawks!! Now anything that is a paw on the floor is gd; rofl!

A few qns:

1. Wad's the level of HP/Mana where it will activate potting? i cant manually set it, can I?

2. What can be a possible reason for DC? it was written earlier that when it runs out of pots it and gets low on HP it will auto DC. Does it detect pkers and DC upon contact? I am afraid that some pkers are strong and 1 or 2hit my characters before the program can detect super low HP and DCs. If it DCs after im dead ill be respawned out of lab.. >.<

3. Random movement is ok as it goes around attacking mobs. I noticed that the boundary version which requires me to tick both boundary and random movement and then choose a pixel as the middel of the boundary has a problem. - It does not attack all the mobs it sees; sometimes hitting 1 or 2 but continues walking around aimlessly most of the time. Any idea what happened?

Will try it for longer period when i get home tonight to see if randoms works for me as most of the other bots i have tried leads me to the top left hand corner and stays there.

Regards,

[evanxxxm]

gbylj@
1. not really, its not by %, its by the color pixel hex located around:


2. it detects ur HP every 0.5 second, usually when pker attacks u, there is a 0-1 second delay before ur screen shows, so too unfortunate if the pker can kill u in 2hits
and if u disable the dc effect, u will be wandering around the lab with ghost mode
nothing wrong with spawning outside lab. dying is not the worst case, think about being botjail or "banana split" happened long time ago. even u drop a db while u bot, u shouldnt feel mad and go crazy, because u are not outputing any efforts.

3. not sure what happens, but this bot kills 1800 tombats/devil/bats quite good everyday for me. send me a 5-10mins video to see what i can do. (please use double speed in video mode)

[Schattenlord]

im botting in pc 2nd map becauz there is nobody who can see me ^^ but sometimes the bot keeps on scattering while there is no monster, then he stands at the same place all time

[ianker]

Hey evan, that's me again!

Well, that's problem is not with me only. other peoples had the same problem with ur bot. I think there are something wrong in ur bot to use it in other computers. Boundary.exe isn't in ELSEv4.2 folder. I found it in Program Files...
And that code you've said, i didn't found it in boundary.ahk, when i decompile that.

Is there something wrong?

[beyondnoob1972]

thats some wicked videos lol i think they r especially made for brs cuz... they use bots like 99.999 % of the time so nice job

[LEWL2]

WHAT THE ****

[evanxxxm]

Schattenlord@
someone mention before, in pc there is some red trees that will affect the bot

ianker@
it suppose to be in program files, because every computer has that folder
if u move that file into other folders, ELSE will just create a new boundary.exe file in program file
when u decompile the program by "Exe2Ahk", it will create the script inside the same folder as the program, which in this case, it will be in program files

beyondnoob1972@
if thats the case, what about those person that use my bot, and not watch video, and they complain dont know how to use certain functions....
for my next bot, i will put a password lock inside the program, and the password can only be seen in the videos...

[gbylj]

hi.

got my friend to test it yesterday and these are his feedbacks.

1. F10- SM spam - did something happened to the SM hot key? It used to just SM by pressing F10 but my friend claims that pressing any "F" key to activate SM is no longer functionable. Therefore, I think the new SM bar has changed the way that SM is activated; and spamming the "F" key does not work anymore.

2. Paws - He happily went to BI to look for paws and picked all of them up; lol; and they turned out to be Vanilla. LOL!

3. Tao - Tested both fire and water - Fire was using Nado in desert city. He noticed that when the mobs are not one hit; and when his character managed to get hit by the mobs; the mobs will continue hitting the tao and the tao will keep potting when its health gets low.

However, the tao is unable to retaliate as the mobs keeps hitting him and he cant nado back; lol! when he runs out of pot it will DC nicely though.

4. I have not tried the bot myself and I will verify his claims when i can; thank you for the answers so far; will try take a video of the boundary error.

Just to make sure I did every installation correctly; these was what I did - 1. DL-ed DDSv3 and extracted contents into the specified folders; MapItemIcon.ani prompted an overwriting of files but but the .dds files did not prompt any overwriting.

Extracted ELSEv4.2's contents into main Conquer folder(my Conquer is not in C:\)

executed ELSEscript.exe.

Did I miss out any steps? Am i supposed to extract the ELSEscript.ahk somewhere else?

5. Noticed that the software does not work on my 21" monitor when i set resolution to 1024x768. On a 17" monitor - the random movement melee version works, without SM.

regards,

[evanxxxm]

Thank you for a detail description
all members should do something like this when they file a complain/bug/suggestions
the more i understand, the more i can help u, so we wont be wasting time asking/answering in few threads

gbylj@
1. my program not only spam the F-slot every 8-10 seconds, after clicking the F-slot, it will follow up with a right click on screen which it suppose to activate the superman skill. for other skills like cyclone..etc, the right click wont have any effects

2. well, someone wants to bot very long time in wine zone or 2nd rb map, which those items are important...if u dont want to pick up crappy things including tokens, gems, mission items. when u install the DDSv3, dont move the dds files...only do the ANI and test.dds.

3. this is like a clicking bot, it does not stop after hitting the mob one time. as long as the red health bar appeared, the bot will click the position where y-10pixel below the red color. so i am not sure what exactly happened in ur friends case

4. does not matter where u extract it, the program suppose to make the backup files inside program files which all windows have that folder. go to ur program files folder to see if there exists some jpg, gif, boundary.exe files. the only thing i can think of is, the client of ur CO is different than normal, which can be cause by 1. editied client 2. using speedhack before u run this program 3. different version of CO

5. this one i dont really know because i dont have a 22in' screen to test
but there is a user mention before, it works well on his 31in' big screen TV
this program does not detect what kind of screen u use. as long as ur CO client is 1024x768, it will click within that range. anyways, dont really know what the problem is

[SRuby]

Votre travail de bot sur serveur français ?
Parce que je lance votre bot, mais le programme ne travaille pas. (Il fait juste la copie d'écran quand j'ai quitté le jeu)

[gbylj]

hmmm... yea, my pc has M's multihack and A1blaster's multiclient inside. >.< i cant remember whether mine is the de-par version or the normal one though..

1. which version of multiclient should i use?

2. if i do not activate speed will the M's multihack conflict with your bot?

Thanks & Regards


edit - I think you misunderstood one point, the bot does not stop after hitting the mob once; it stops after getting hit by any mob as the keeps on attacking his character without giving it a chance to retaliate. I'll try it again now to see for myself.

edit2 - Haha, I know whats the reason now; the apparitions attack speed is faster then his thunder; therefore, his thunder keeps getting "cancelled" by the apparitions attack. LOL!

[evanxxxm]

gbylj@
the M's shouldnt affect the client if u start the program before hand
if its a edited one, there are 2 solutions:
1. reinstall CO, all my bots assume u have a normal client, so the memory address is base on un-edit ones.
2. use cheatengine to find ur own hex address. i cant help u on this, since we have different clients. after u have the correct address, u can go to the adv tab and change the X hex and Y hex address

PS* ehm, if u decide choosing 1. and if u still want a multi-client, u can download a hex editor and hook on the CO client. find a word call English, and change it to english. that will allow u to use multi-client. in this way, the hex value will be the same also, so this bot will work

[gbylj]

Hi.

Sorry, just tested the bot for warrior in lab4; SM works fine; my friend thank you! LOL!

P.S It works with Speed hack too!

Will continue testing the tao version later.

Cheers,