[GUIDE?]Ask -> answer

[Xanward]

Hey people,
i've read a lot of posts, where people has been asking things about how to set this, do that, set this, use that, open this etc.

Thats why i opened this guide-like Thread to post YOUR question, or pm aswell, and ask, why it doesnt work or, will it work at all?

If you have a question, try to fill out this table and post/pm it to me:

Experience in hacking : (timeframe)
What program(s) do you use:
What do you want to make:
Where are you stuck:
What did you try yet:
What do you think could help:
Why do you think it does not work:


go for it.

[St!gmata]

*stick*
Could be a nice thread.

[Xanward]

I also hope people use it though.^^

[MiniVan2k]

Alright I guess I will start things off here...

· 2 Years, All failures @ hax (Not including the first time I've used a Gameshark to hack Pokémon Red/Blue =D)
· (Stock) CheatEngine
· A camera unlock so that the stupid camera can zoom out more in dungeons
· I've successfully gotten to the point where I know which addresses control the camera, BUT the problem starts there. The moment I change the value there it zooms in and out repeatedly making me dizzy until I unfreeze it.
· I've tried to change the other addresses involved with the camera but to no success.
· A friend told me I'd need to know how to code and inject the code into the disassembler or something rather.

P.S. I've NEVER succeeded in hacking anything involving floats in my life. Just can't get anything right. Most of the time I don't know what to start with in the search as I have only 1 GB of RAM + couple hundred MB of HD space + CABAL running = massive memory consumption when trying to start searching with "unknown initial value / float" >_>

[Xanward]

- Your friend talks ****
- You search in kind of right way
i give you a hint : zoomdistance.4byte.

Look for the zoomdistance instead of camera angle, OR use my map hack, if you change a special value, you will be able to angle the camera in a dungeon as if you was on a normal map.

[Hyetal]

Wow this thread is too under-used.

My turn to ask a question!

> Been hacking games for 6 years now, mostly leeching off others.
My biggest experiences was hacking MapleSEA and iGunz, where I managed to make my own hacks with ce (with UCE tutorials provided, though).
> OllyDBG, Delphi7, Cheat Engine
> UCE for CabalSEA
> I follow guides for making Maplestory's UCEs but they don't work for Cabal
> Nothing significant enough to get past X-trap
> I'm wishing you could enlighten me on how each patch affects bypasses and allows X-trap to detect hacks. When making a proper UCE to get past detection of strings that UCE uses do you dump X-trap process to look for a file of detected strings to get past X-trap?
> Strings were detected by X-trap and UCE fails

[Xanward]

Basically Xtrap/GG "reads" strings and commands in processes and also looks for basic processnames ofcourse. Thats why, when you wanna make an UCE, you need to rename some var. names etc.

I havent played a game with Xtrap yet (exept audition) neither tried to hack thats why im not fully informed how xtrap works but GG reads some specific commands.

But i know Xtrap reads out the memory of processes and shuts down the game/force reboots.

Also a reason why your UCE was detected is because the strings you named your commands etc. are already known and Xtrap blocks them. try some others.

[neuro81]

Experience in hacking : around 1 year

What program(s) do you use: UCE and olly

What do you want to make: basically increase the skill limit range (AoE)

Where are you stuck:
Been trying to search in float (everytime i cast skill with long casting time), then switch to a different skill with a different AoE range. still no clue till now.

What do you think could help:
A different type of search maybe? or could it be the timing?

Some advice will be great

[grangzer]

Experience in hacking : N/A
What program(s) do you use: MHS
What do you want to make: SP LOCK
Where are you stuck: Finding Value
What did you try yet: Unkown Initial + Changed by 450 (Combo Sp Usage)
What do you think could help: Hint on address/memory scan setting/data type/ what i'm doing wrong
Why do you think it does not work: Hell do I know, thats why I asked here =)

[phongbui]

Experience in hacking : know little about UCE / macro 6

What program(s) do you use: AutoIt

What do you want to make: a function to make a AutoIt bot stop
Where are you stuck: trying to make the "stop" button something else other than "ESC"
What did you try yet: Func Terminate()
$MB_MsgBoxButtons = 5 ;What buttons that show in messagebox 5 = Retry and Cancel
$MB_Cancel = 2 ;What button is pressed to exit the script 2 = Cancel, If Cancel buton is pushed the script stops.
If MsgBox($MB_MsgBoxButtons, $title_b, "Retry or Cancel the bot?") == $MB_Cancel Then
Exit
EndIf
EndFunc ;==>Terminate

What do you think could help: trying to make the "stop" button something else like F12

Why do you think it does not work: ?? works but my autorelogin Bot interferes when it presses "ESC" and go to select char, it shuts down the first botting bot

P.S i tried using
HotKeySet("{F11}","Terminate")
but it doesnt seem to work (do i need to put itsomewhere certain in the script ? or soemthing )

[Xanward]

Originally Posted by neuro81

Experience in hacking : around 1 year

What program(s) do you use: UCE and olly

What do you want to make: basically increase the skill limit range (AoE)

Where are you stuck:
Been trying to search in float (everytime i cast skill with long casting time), then switch to a different skill with a different AoE range. still no clue till now.

What do you think could help:
A different type of search maybe? or could it be the timing?

Some advice will be great

Basically you cant find the aoE range like this. To increase your aoE range you need to activate GM mode/find gm mode AoE value.
Basically, when you cast skills with different AoE's, nothing changes, its all static. Its some value which reads of some static ones so dont bother with this method.

Originally Posted by grangzer

Experience in hacking : N/A
What program(s) do you use: MHS
What do you want to make: SP LOCK
Where are you stuck: Finding Value
What did you try yet: Unkown Initial + Changed by 450 (Combo Sp Usage)
What do you think could help: Hint on address/memory scan setting/data type/ what i'm doing wrong
Why do you think it does not work: Hell do I know, thats why I asked here =)

Sp is serverside anyways. q_Q

Originally Posted by phongbui

Experience in hacking : know little about UCE / macro 6

What program(s) do you use: AutoIt

What do you want to make: a function to make a AutoIt bot stop
Where are you stuck: trying to make the "stop" button something else other than "ESC"
What did you try yet: Func Terminate()
= 5 ;What buttons that show in messagebox 5 = Retry and Cancel
= 2 ;What button is pressed to exit the script 2 = Cancel, If Cancel buton is pushed the script stops.
If MsgBox(, , "Retry or Cancel the bot?") == Then
Exit
EndIf
EndFunc ;==>Terminate

What do you think could help: trying to make the "stop" button something else like F12

Why do you think it does not work: ?? works but my autorelogin Bot interferes when it presses "ESC" and go to select char, it shuts down the first botting bot

P.S i tried using
HotKeySet("{F11}","Terminate")
but it doesnt seem to work (do i need to put itsomewhere certain in the script ? or soemthing )

Wah, basiclly i thought i get asked about CE etc. related stuff but i'm not into AutoIt at all. Neither i didn't got your plan to be honest. But repost and explain me your lan again because i really didnt got it and didn't got the advantage of it..q_Q


**EDIT: Ah now it came up to my mind *sry woke up 20 mins ago q_Q*
Well, you used the func "Terminate". This closes the process totally so there wont be a restart (thats what you want, isn't it?) when your bot is stuck.Just closes and doesn't re-open.

[phongbui]

ok let explain again So first, ihave a bot (autoIt) that finds and kills monsters. And to stop the bot, i need to press 'ESC' Now here the problems come. l have another autoit bot that autorelogins to prevent the 1hr dc. So when my autorelogin bot presses 'ESC' my fighting bot stops. So i need your help to maKe me a 'stop' function on something else like f12.

[grangzer]

I've seen people do it though...
Locking SP bar to use infinite combo/aura/bm/bm2

[Xanward]

Originally Posted by grangzer

I've seen people do it though...
Locking SP bar to use infinite combo/aura/bm/bm2

1st When you fight your SP increases too ..q_Q i can combo infinite,too.

2nd. The aura/b2/bm1 infinity is a well known and not so rare bug.

Originally Posted by phongbui

ok let explain again So first, ihave a bot (autoIt) that finds and kills monsters. And to stop the bot, i need to press 'ESC' Now here the problems come. l have another autoit bot that autorelogins to prevent the 1hr dc. So when my autorelogin bot presses 'ESC' my fighting bot stops. So i need your help to maKe me a 'stop' function on something else like f12.

well, i'm really not into autot at all. But why don't ya go to the Autoit forum, i bet they can help you way more than me. q_Q

[grangzer]

So how do you get infinite aura/bm/bm2 then?