Perm spoofer bricked my pc ?

[rotary9z]

For starters I’ve attempted a cpu change, after I replaced my cpu my pc didn’t post, when I put back my old cpu it didn’t post either, nothing else was touched, pc unplugged, cmos reset, bios updated. I’ve used archine numerous times before and was wondering if archine spoofing my cpu could have bricked my motherboard/bios.

[LiqMadiq]

Using non working spoofer which the developer is unknown could brick your MB.

[MAXWELL NIDJI]

Originally Posted by rotary9z

For starters I’ve attempted a cpu change, after I replaced my cpu my pc didn’t post, when I put back my old cpu it didn’t post either, nothing else was touched, pc unplugged, cmos reset, bios updated. I’ve used archine numerous times before and was wondering if archine spoofing my cpu could have bricked my motherboard/bios.

Does Archine even spoof cpu?

[rotary9z]

Originally Posted by MAXWELL NIDJI

Does Archine even spoof cpu?

I am fairly sure it does, after doing some research, a mutual had the same issue with woofer

[WhiteSummer]

is it AMD or Intel CPU? Maybe check the pins and make sure you didnt accidentally bend them while swapping

[rotary9z]

Originally Posted by WhiteSummer

is it AMD or Intel CPU? Maybe check the pins and make sure you didnt accidentally bend them while swapping

Amd, I tried on 3 diff cpus, cleaned the socket, no bends

[MAXWELL NIDJI]

Originally Posted by rotary9z

Amd, I tried on 3 diff cpus, cleaned the socket, no bends

Does ur mobo have any error codes or beep codes?, beep or error codes will help to determine what's wrong

[rotary9z]

Originally Posted by MAXWELL NIDJI

Does ur mobo have any error codes or beep codes?

Ye I’m getting ezdebug lights but in random patterns

[GenshinMeme]

I've had this happen to me before. Pc would turn on lights would flash then it would turn off and do it constantly. PC would boot if I removed the 8 pin power cable that powers the cpu but the problem was with the motherboard itself. I have a multibios switch on my board and I flipped it to the backup bios and I was able to play again.

Check if you have this switch and see if you can get it working

[rotary9z]

Originally Posted by GenshinMeme

I've had this happen to me before. Pc would turn on lights would flash then it would turn off and do it constantly. PC would boot if I removed the 8 pin power cable that powers the cpu but the problem was with the motherboard itself. I have a multibios switch on my board and I flipped it to the backup bios and I was able to play again.

Check if you have this switch and see if you can get it working

Haven’t got that

[MAXWELL NIDJI]

Originally Posted by rotary9z

Ye I’m getting ezdebug lights but in random patterns

So does the debug lights switch from cpu, ram, gpu,boot all the time?

[rotary9z]

Originally Posted by MAXWELL NIDJI

So does the debug lights switch from cpu, ram, gpu,boot all the time?

It’s dram and cpu

[LukeManolia]

either:

1. your mobo is fried / cpu socket is fried

2. cpu socket is broken

3. cpu is broken

Archine doesn't flash your bios in any way or form, so they can't brick even if they wanted to. Also no, it doesn't spoof CPU.

I'd recommend using the USB flashback feature to flash original bios .cap if you have the feature.

If it still doesn't boot, then its one of the reason I mentioned above.

[rotary9z]

Originally Posted by LukeManolia

either:

1. your mobo is fried / cpu socket is fried

2. cpu socket is broken

3. cpu is broken

Archine doesn't flash your bios in any way or form, so they can't brick even if they wanted to. Also no, it doesn't spoof CPU.

I'd recommend using the USB flashback feature to flash original bios .cap if you have the feature.

If it still doesn't boot, then its one of the reason I mentioned above.

- tried 3 different cpu, so I’m assuming atleast one of them isn’t broken lol,
I bought a new motherboard and hope that will solve the issue.