[GUIDE] Setup a server without errors [1x GameServer]

[gengkey02]

Originally Posted by chrysler

can you help me on teamviewer maybe? would be great

i cant help in teamviewer,im totally noob,try...delete all 3 database...and then create back the database and restore them back...see if problem come or not...

Originally Posted by darkmartha

i have same problem but ini files all r checked. pls help me, at this point i stuck everytime -.-

Check certification ini,if u make changes dont forget to compile back...read the guide carefully.

[desthroia]

smc is empty, what am I doing wrong?

[darkmartha]

Originally Posted by gengkey02

i cant help in teamviewer,im totally noob,try...delete all 3 database...and then create back the database and restore them back...see if problem come or not...



Check certification ini,if u make changes dont forget to compile back...read the guide carefully.

i know that^^ too much times i changed ALL to local ip and ipv4 adress and switched and so on.... nothin works, i read all the thread but nothin helps -.- nvm i give up dont waste ur time with me, im only player again -.-

[jilbab]

Globalmanager.exe just keeps closing after a second.. I've turned the DEP off for it and all other exe's, still nothing. I've browsed the forums for a solution and cant find anything

[desthroia]

Originally Posted by jilbab

Globalmanager.exe just keeps closing after a second.. I've turned the DEP off for it and all other exe's, still nothing. I've browsed the forums for a solution and cant find anything

try to copy all files from "Files" into the "Blitzkrieq_Bin_Data" folder.
I had the same problem but now it works!

[chrysler]

Originally Posted by QuantumRising

HOLY ******* **** i figured it out.

The Cert was using my Hamachi IP even though I didn't tell it to. So I changed the WAN and NIP to my hamachi IP, Updated Server.cfg and it's working now.

Problem is that I get a C9 when I try to connect to it. (From my laptop)

saw you had the same error,
cannot certify server body [MachineManager] know how to fix it ?

[godofcloud]

how fix smc keep on closing me

[Serenduk]

Originally Posted by desthroia

smc is empty, what am I doing wrong?

click application then load

[godofcloud]

how come when i put id pw on smc keep on closing on me, how do i fix it xD

[gengkey02]

Originally Posted by godofcloud

how come when i put id pw on smc keep on closing on me, how do i fix it xD

maybe you put wrong gm id and pw in the smc...u can try delete the pw in TB_user and make new password for the gm id.

[godofcloud]

ready did that but still same thing happen, i thought GM id its 1

[aliaredo]

Originally Posted by zikor1337

Due to the HUGE amount of threads regarding to server file's problems, I created this guide. It can easily be done in less than 20-30 minutes if you have a bit of knowledge about how these stuffs work.

About the guide:
It is just for the servers that run 1 Gameserver.
It is based on Windows 7.

***Things you'll need***:
At least 4GB of ram . (More = better)
A decent processor. The files can be ran on a Core 2 Duo processor for example, but the loading time is HUGE!


***Things you'll have to download***:
Server files:



password : "fortheworstcommunityever"




MSSQL - Download it depends on your Windows version (to find out if it is 32bit or 64bit go to Start-> Right Click on My Computer and Proprietes - ):







__________________________________________________

So, lets start with the MSSQL setup:

 Spoiler

Now, MSSQL Server Management Studio Express:

 Spoiler

Now lets create the databases and restore them:

 Spoiler

1. Start SQL Server Management Studio Express


2. Create the databases:






3. Restore the databases:
3.1 Create a folder where you'll keep the databases. (E.g. : Database)
3.2 Create 2 folders inside "Database folder": SRO_LDF_Files and SRO_MDF_Files . It will look something like this:


3.3 Now manually create these files in the corresponding folder:
***You have to change the settings of your folder. It must show the extension of the files.

Go to Organize -> Folder and Search option -> View -> Uncheck "Hide extensions for known file types"***
In MDF Molder:


In LDF Folder:

It will look something like this:


4 Now Database restoring:
4.1 SRO_VT_ACCOUNT


4.2 SRO_VT_SHARD_INIT


4.3 Log_DB



We are done !!

Now lets set the ODBC(I added in the "Files" archive some register entries, you can use them but I will show you how to setup them manually):

 Spoiler

SRO_VT_ACCOUNT








Repeat these 6 steps for the other 2 DBs (SRO_VT_SHARD_INIT and Log_DB)

The databases already have all the fixes they need.

Now we'll create the GM account and set the privileged IP !
First we will start with GM account:

 Spoiler

In the MSSQL Server Management Studio, go to SRO_VT_ACCOUNT and open the TB_User table.
JID: Keep it clean, it will generate automatically.
StrUserID: The ID you want. (e.g. : testaccount)
Password: You need a MD5 hash code. Go to: and hash your password. For example: the password "test1" will give you this md5 hash code "5a105e8b9d40e1329780d62ea2265d8a" . Copy that code and write into your password box.
GMrank: Set it to 1
Sec_primary: Set it to 1
Sec_content: Set it to 1

Now the privileged IP:

 Spoiler

Go to Start-> Search for "Run" and enter it. Inside write "cmd". Inside write IPconfig. Now search for the IPv4 Adress, like in this picture:



Now that you found out your IP, go to: SRO_VT_ACCOUNT -> _PrivilegedIP
Write your IP like this:

In order to start the server properly (with one GameServer) you'll have to close Alexandria map. How you do that? Pretty simple.

Go to -> SRO_VT_SHARD_INIT -> Search for "_RefRegionBindAssocServer" and Open it.

So, lets make it simple: 1= Open/ 0=Close.
That means you'll have to set "0" to:

 Spoiler

CHINA 1
TQ 1
West_China 1
Oasis_Kingdom 1
Thief Village 1
Roc 1
Eu 1
Am 1
Ca 1
SD 0
KingsValley 0
Pharaoh 0
DELTA 0
TEMPLE 0
FORT_JA_AREA 1
FORT_DW_AREA 0
FORT_HT_AREA 1
FORT_CT_AREA 0
FORT_SK_AREA 0
FORT_BJ_AREA 1
FORT_HM_AREA 1
FORT_ER_AREA 1
ARENA_OCCUPY 1
ARENA_FLAG 1
ARENA_SCORE 1
SIEGE_DUNGEON 1
ARENA_GNGWC 0
GOD_TOGUI 1
GOD_WRECK_IN 1
GOD_FLAME 1
GOD_WRECK_OUT 1
EVENT_GHOST 0
JUPITER 0
PRISON 0
GM_EVENT 0

Now IIS and FTP server.

We'll start with IIS setup and configuration.

 Spoiler

Go to: Control panel -> Program and Features -> (on the upper left corner) Turn Windows features on or off.



Now go to: Start-> and search for IIS (Internet Information Service Manager)
Now explore the website directory:


Now in that folder add the files from (IIS Files) folder.


Now edit DBConnect.asp like this:


Now go to:


Enable it:


Also, go to:


Modify the port from 80 to 8080:


Now start it:



And you can test if it is working like this:

FTP server:

 Spoiler

You downloaded earlier FileZilla Server.

Lets install it:







Now, modify this IP if you have a static IP. I don't have one so I'll use my localhost IP and also set a password.



Now, go to Edit-> Users, and now add your FTP account like I did in the picture:



Now, set your FTP password and then go to "Shared Folders":



Now, lets create a folder for the FTP server where we'll store the files (You can create it wherever you want!) and browse it as the picture shows you:



Now, set the permissions:



Now you are done with the FTP setup.

Now, lets begin with the server files setup.

Extract all the archives in one folder, as you wish. Keep them somewhere you can find them very fast.

We will start with Certification:

 Spoiler

Go to the Certification folder that I gave you in the "Files archive" and then open the "ini" folder.

You have to modify just 3 files in order to start your Certification.

1. Open srGlobalService.ini and you'll see this inside.


SERVER = YOURPCNAME\SQLEXPRESS
UID = sa
PWD = password that you set on the MSSQL installation

2. Open srNodeType.ini and you'll see this inside.


wip= YOUR IP (Static ip or local IP - 192.168.x.x)
nip= YOUR IP (Static ip or local IP - 192.168.x.x)

3. Open srShard.ini and you'll see this:


SERVER =YOURPCNAME\SQLEXPRESS
UID = sa
PWD = password that you set on the MSSQL installation
capacity = Slots of your server

Now go back to Certification folder and run " 1 - compile.bat " and it will show you something like this:



Now run "3 - CustomCertificationServer.bat" and your certification is ready to go.

Now, take the server.cfg that I gave you in the "Files" archive and overwrite it on your server files folder.
Open it and modify as I'll show you:

 Spoiler

Modify the IP (192.168.1.100) to YOUR IP (Static or local) . To do that in the easy way press CTRL+H in notepad.

ExpRatio, ExpRatioParty, DropItemRatio, DropGoldAmountCoef, HwanGainFactor(how fast you'll gain berserk) you can modify them as you want.

Now go to the bottom of the server.cfg at the SR_ShardManager and you'll find there the CREST_FTP_URL . Modify the ID with "crest" and password with the password you set earlier for the FTP account. Now go to your FTP folder that you earlier created and inside it create a folder "SRO_CREST" . Also, in the "SRO_CREST" folder , copy the files that you'll find into "Blitzkrieq_Bin_Data -> Crest"

In order to start the server, go to "Files" archive and take the cracked AgentServer and overwrite it with the existing one in "Blitzkrieq_Bin_Data" .

Also, go to SMC folder and edit ServiceManager.cfg as I'll show you:



Now you're done !

You can start the server now.

Do it in this way:

1. Certification
2. Global Manager
3. Machine Manager
4. SMC (Use the account that you created earlier in the Database)
5. GatewayServer
6. DownloadServer
7. FarmManager
8. AgentServer
9. SR_ShardManager
10. SR_GameServer

Because you used "no Xtrap patch" you'll be able to start the client with edx loader. The port is "15779"


I'll fix the errors in the guide, so if you see one, tell me. Also, if you have any problems, post here and don't make any other threads about those problems.

As I said, if you setup the server following the guide step by step, you won't get any errors.

Also, if the guide needs anything else, lemme know so I can add them.

Credits for the guide:
Not too many credits, just to Cernobyl for releasing the files and Dr.Abdelfattah for all the fixes on the database, ini files, server.cfg etc. If I didn't mentioned somebody here, I'm sorry from the bottom of my heart

Cheers!

Don't forget to thank if this guide helped you out !

Guys ...when i try to open smc.exe and enter use and password the SMC.exe stop working and give me er-err windows all the time ,please help me to fix the problem ?

[Serenduk]

Originally Posted by godofcloud

ready did that but still same thing happen, i thought GM id its 1

gm id is login name

[Phoenix212]

I get an error when I Click "OK" in restore database !!
"Restore failed for server ..etc"
"Unable to open physical file ..etc"
Any help please ? Would be much appreciated !! Fast pl0x xDD

[polizey112]

I fixed all ips and stuff but i still fail at that thing