[Guide] RSRO - iBot configurating **UPDATED**

[Darkness™]

**UPDATED FOR 1.018 RSRO**

This thread has previously been closed by mistake, and I hope it won't happen again.
Before I go any further, this thread is not violating any forum rules and therefore I am totally safe from getting a penalty from reposting.
I am in no way responsible for any stolen source code, nor personal problems of any moderators who are having an issue and closing the thread.
Before I paste, I want to say the most important thing, this thread is violating no Forum Rules, and as long as it is not breaking any rules, I will keep reposting it if needed if it gets further closed for an unspecified reason.

I thought a lot of people that are looking for a good rSro bot would appreciate a guide since I must admit I were pretty much confused with how to make the bot work because there's no explanation posted on the official bot site which I will NOT post, because if I did so, I would violate one of the forum rules.

First of all, let me explain the basics.
iBot is somewhat similar to sBot, with a couple of additional options, you can run the game clientless as well (Wow, I bet somebody spent a lot of time on making of this sweet bot, thank you very much ).
Let's start off with the basics, in order to start botting you need to download the following files which I will explain, which one is for what.

NECESSARY DOWNLOADS

- Mirror Mediafire:









- Mirror Mediafire:

- Mirror Mediafire:

CONFIGURATION

Download the , etract them and inside the folder run the regOCXfiles.bat, once it starts follow the instructions in the cmd window and click yes to confirm the registration of each file.
In the same folder, you will find a file named vcredist_x86.exe, install it or repair it if you've got it already installed.

Now you partly ensured that the riBot you are about to download will have no common errors caused by these missing files.

Now, download .

(Side note: Download and as well.

Extract your iBot somewhere, let's say for Example on desktop in a folder named iBot.
In that iBot folder, you will find a folder named map which is empty, or has one default picture.
Extract the images from the file you've downloaded into riBot/Map folder.

Now we're finally ready to start launching the game over the bot and we're totally ready to set up our loop.
Start riBot.exe, and click No (Unless you want to donate, which is cool, but not what this tutorial is about =D)
Wait a couple of seconds, and RSRO - iBot window should pop up.
The only thing you need to pay attention to if you are going to start the bot over SRO_Client is the Login port that iBot gives you.
For instance this is what I get:



Just pay attention to the port and now launch edxSilkroadLoader_Lite.exe from .
Click "Add", browse to your Silkroad folder and choose your sro_client.exe. Now press Launch and confirm the error message with OK. Now check "Patch Seed", check "Redirect Login IP" and change the port from 15778 to the one, which is given by riBot. Now press "Start!"

Once Silkroad opens up, log in and select your character.
By the time you click Start and the character loads in the game, the iBot should have already read all the stats of your character, such as Inventory items, HP/MP, SP, coordinates etc.
Go back to your iBot and take some time configuring the loop you want .

To launch the iBot clientless, all you have to do is open riBot.exe.
Click the second green icon and select the login method as Clientless.
Click connect and you should connect in a couple of seconds to the login server of ruSro.
Select the server and write down your login info in order to log in.
Once you logged in select your character and click Login.
Your pc might go crazy for 2-3 seconds, but it'll be cool, it's just collecting your account packets about your inventory n stuff.
The rest of the options should be easy to understand since the bot is made on english, there's only one thing tho I would like to add about making a loop.

This bot has a Bug when looping, in order to make your loop work you will have to add This to the script you make (I suggest when recording path to your training place, you start from stable keeper in town).

This is the for example a script that came in the download folder for movoias level 1-5.

 Spoiler

go(-10748,2552)
go(-10737,2568)
go(-10727,2592)
go(-10721,2605)
go(-10709,2623)
go(-10711,2610)
go(-10700,2610)
go(-10684,2612)
go(-10662,2606)
go(-10662,2606)
go(-10660,2604)
go(-10660,2603)
go(-10660,2603)
go(-10660,2603)
go(-10660,2603)
go(-10660,2603)
go(-10677,2613)
go(-10691,2622)
go(-10706,2629)
go(-10724,2631)
go(-10743,2634)
go(-10762,2635)
go(-10781,2635)
go(-10789,2635)
go(-10800,2636)
go(-10818,2637)
go(-10840,2638)
go(-10862,2639)
go(-10875,2640)
go(-10894,2641)
go(-10914,2642)
go(-10937,2643)
go(-10957,2643)
go(-10972,2644)
go(-10990,2644)
go(-11010,2644)
go(-11024,2644)
go(-11036,2645)
go(-11054,2645)
go(-11074,2645)
go(-11093,2645)
go(-11111,2645)
go(-11131,2645)
go(-11150,2645)
go(-11162,2645)
go(-11178,2656)
go(-11192,2669)
go(-11201,2682)
go(-11212,2699)
go(-11223,2716)
go(-11223,2717)
go(-11225,2721)
go(-11233,2738)
go(-11241,2755)
go(-11250,2772)
go(-11254,2779)
go(-11254,2779)
go(-11254,2779)

You need to add the following lines to the text to make the loop work without getting stuck, the final result of the script will look something like this (Red text is the added one)

 Spoiler

go(-10748,2552)
go(-10748,2552)
go(-10737,2568)
go(-10727,2592)
go(-10721,2605)
go(-10709,2623)
go(-10711,2610)
go(-10700,2610)
go(-10684,2612)
go(-10662,2606)
go(-10662,2606)
go(-10660,2604)
go(-10737,2568)
go(-10727,2592)
go(-10721,2605)
go(-10709,2623)
go(-10711,2610)
go(-10700,2610)
go(-10684,2612)
go(-10662,2606)
go(-10662,2606)
go(-10660,2604)
go(-10660,2603)
go(-10660,2603)
go(-10660,2603)
go(-10660,2603)
go(-10660,2603)
go(-10677,2613)
go(-10691,2622)
go(-10706,2629)
go(-10724,2631)
go(-10743,2634)
go(-10762,2635)
go(-10781,2635)
go(-10789,2635)
go(-10800,2636)
go(-10818,2637)
go(-10840,2638)
go(-10862,2639)
go(-10875,2640)
go(-10894,2641)
go(-10914,2642)
go(-10937,2643)
go(-10957,2643)
go(-10972,2644)
go(-10990,2644)
go(-11010,2644)
go(-11024,2644)
go(-11036,2645)
go(-11054,2645)
go(-11074,2645)
go(-11093,2645)
go(-11111,2645)
go(-11131,2645)
go(-11150,2645)
go(-11162,2645)
go(-11178,2656)
go(-11192,2669)
go(-11201,2682)
go(-11212,2699)
go(-11223,2716)
go(-11223,2717)
go(-11225,2721)
go(-11233,2738)
go(-11241,2755)
go(-11250,2772)
go(-11254,2779)
go(-11254,2779)
go(-11254,2779)

Constantinople Town Script without stucks.

 Spoiler

go(-10644,2603)
go(-10634,2586)
go(-10623,2582)
talk(Storage)
go(-10633,2587)
go(-10647,2610)
go(-10659,2629)
go(-10672,2646)
talk(Sell)
talk(Ammo)
talk(Repair)
go(-10657,2635)
go(-10634,2635)
go(-10625,2635)
talk(Potion)
go(-10632,2604)
go(-10642,2570)
go(-10652,2551)
go(-10668,2538)
go(-10680,2526)
talk(Grocery)
go(-10702,2536)
go(-10728,2537)
go(-10757,2533)
talk(Stable)

Credits:

IMPORTANT: **Start ur script from this point.**

MAKING YOUR OWN SCRIPT

You stand near stable NPC in a town you want to make script at (You have to stand near stable NPC else the bot will get stuck, because the bot starts YOUR script that you made AFTER it finishes the integrated LOOP script that's already in the bot that you can't change).
So go near Stable NPC, go to Loops icon at riBot, click Record, then give a check to 'Auto Add...'.
Then start moving to your training place, once you arrived you click stop, then click save, and save the file as .txt at wanted location, and voila, that's your script.
But take care, do not make BIG steps or you will get stuck on your way to training place, make the steps small and retarded, give it some wait time before each command .

Add the red text to all the scripts for Constantinople only, and it will work.

Any questions? Welcome.
(Thanks to for actually providing me with the link of the loader and explaining me the redirecting thingy :P.)

Concerning signature errors, something must be blocking the riBot from starting, please turn off your firewall or AV and try it again. (I suggest you just add an exception for this program).

[recking]

now the pupil becomes the teacher, well done

[Patta]

hm .. i cant use this bot because it doesnt detect my character info

[DoubleDTheGreat]

Originally Posted by Patta

hm .. i cant use this bot because it doesnt detect my character info

If you followed the guide I wrote instead of not reading it and complaining, it would work.

[markis11]

Thanks,Im gonna try this.

[Kazuya¹]

better hope invincible doesnt see this thread. he'll delete it.

[mfsmhd]

seems able to trust
I'll try thx if work

Edit:
Works As A Charm !!!!!! Great man thanks ! (K)

[recking]

Originally Posted by Kazuya¹

better hope invincible doesnt see this thread. he'll delete it.

isnt christmas the time to forgive?

maybe we see a little wonder...

[lopasas]

Originally Posted by Kazuya¹

better hope invincible doesnt see this thread. he'll delete it.

why would he do that?

you know what question is coming after this one, so just answer both xD

[kundzior]

GF. Now ruSRO will be like tSRO... Thanks!

[recking]

Originally Posted by kundzior

GF. Now ruSRO will be like tSRO... Thanks!

the russians had the chance. buying a low light copy of isro, with no protection against bots, or getting the high end version of ksro...

its their fault, not ours. now they have to invest in to their gm team...

[DuTcHtUrK]

Ty... Tsro the second will appear reaaaallllyyy soon (saw already 14 bots on the same hunting area

[DoubleDTheGreat]

Originally Posted by Kazuya¹

better hope invincible doesnt see this thread. he'll delete it.

Why would he delete it and for what reason?
Personal reason or a stolen source gives him No right at all to delete a thread, unless he specifies another reason .
If he does delete the thread, I'll post another as long as the explanation for the deletion has nothing to do with breaking board rules.

[cygan92]

I have a problem. IF i open ibot the port is 16000 and if i try open loader its a error : ServerSignature Error 1 Can some1 halp me?

[Albert07]

i thought discussion about iBOT are prohibited here on this forum...

Oh yea and it wasn't necesary to add separate link for the OCX files , cuz they are already on the ribot archive ^^