![[Guide] Modifying nuConnector](https://www.elitepvpers.com/forum/iconimages/sro-coding-corner/guide-modifying-nuconnector_ltr.gif){kind=small}
By: Kazuyaš
Index:
1. Downloads
2. MultiSocket
3. IP Modification
1. Downloads
What is MultiSocket? MultiSocket is like an addon for nuconnector that
rev6 used with earlier nuconnector versions, it allows you to open more
than one bot with the single nuconnector. (multi botting)
Part 1
#1 - Open OllyICE (
) -> ()#2 - Select File -> Open (
)#3 - Navigate To Where You Extracted The "MultiSocket.zip", And Select "nuConnector v8.1.exe" (
) -> ()#4 - Scroll Down To Line: 0040B1A3 (
)#5 - Right Click On The Line -> Assemble (
)#6 - Type "JMP 0041CF1A" In The Assemble Box, And Press Enter (
)#7 - It'll Automatically Select The Next Line, Delete Whats In The Assemble Box, And Type "NOP" (
)#8 - Repeat #7, Then Click The Cancel Box (
)Part 2
#9 - Scroll Down To Line: 0041CF14 (
)#10 - Right Click -> Follow In Dump -> Selection (
)#11 - Select The First 2 Rows & 3/4 Of The 3rd Row (
)#12 - Right Click -> Binary -> Edit (same as #11)
#13 - Change All The "00" To "C6 45 FC 04 6A 01 E8 26 AC FE FF 83 C4 04 8D 4D E0 E9 7A E2 FE FF" (
)#14 - Press Enter (
)Part 3
#15 - Right Click -> Copy To Executable -> All Modifications (
) -> ()#16 - Click "Copy All" (
)#17 - Right Click -> Save File (
)#18 - Name It Whatever You Want, But Dont Forget We're Not Done Yet (
) -> ()Part 4
#19 - Open Hex WorkShop (
)#20 - File -> Open -> Navigate To & Select The File You Just Saved In Olly (
)#21 - Edit -> Find, Type = Text String, Value = 22580 (
)#22 - Click OK And It'll Select The Text Automatically (
)#23 - Change The 22580 -> 22584 (
)#24 - File -> Save AS -> Save It As "nuConnector v8.1 Multi.exe" (
)#25 - Close Hex Workshop, Delete The Old File That We Saved Before, And Your Done! =] (
)3. IP Modification
What could this possibly be used for? Well if you want to make a bot for
a different version of sro, (ie - csro/ksro/vsro/ecsro) this would allow
you to do so, with modifying the internal IP that nuconnector listens
for, you can use it with almost any version of SRO.
This guide will be a lot less detailed than the first one, mainly because that first one took 2
hours to write and I am tired =] Plus you already learned the basics to everything in the first
guide, so there is not a need to reteach them to you again.
Needed Info = Server IP (of the sro server you plan to use this nuconnector with)
#1 - Open OllyICE, And Load Up The "nuConnector v8.1.exe" (
)#2 - Right Click -> Search For -> All Referenced Text Strings (
)#3 - Scroll All The Way Up And Find The IP Addresses, Double Click On The First One (
)#4 - See The Line PUSH nuConnec.004621D4 (
)#5 - Right Click In The Dump, And Click Go To -> Expression (
)#6 - Enter The Number From The IP Line, "004621D4" (
)#7 - The Dump Will Go To That Line, There Are 3 IP's In The Hex (
)~ (note) 121.128.133.26 = gwgt1.joymax.com
~ (note) 121.128.133.27 = gwgt2.joymax.com
#8 - Highlight The 1st One, And Right Click -> Binary -> Edit (
)#9 - Replace The IP In The ASCII Box, With The IP Of Your Server (my example = ecsro) (
)~ (note) if the IP is shorter, there will be unwanted numbers left, in my case, i have 2 unwanted numbers left,
to remove them, just highlight the unwanted numbers in the dump, and right click -> binary -> edit, and in the hex
box, just type "00" for each number that needs removing. (
)#10 - Repeat Step 8 - 9 For The Remaining 2 Default IP's In The Dump (
)#11 - When Your Finished Replacing The 3 IP's, Highlight Everything Thats Red & Right Click -> Copy To Executable File (
)#12 - In The New Box, Right Click -> Save File (
)#13 - Name It Whatever You Want, And Click Save (
)#14 - Close Olly, Your Done =], Now Test It (
)~ (note) for ecsro, you'll need a loader to open sro_client.exe directly, if you want to use nuconnector.
And there you have it, 2 well written guides describing and showing how to modify nuconnector to
your every need =] your welcome and enjoy the knowledge =]
Thanks for reading,
//Kazuya
-------------------------------------------------------------------------------------------------------------------------------------------------
Guide FAQs
Question:
Does this mean you can use AgBot/StealthLite/PHBot on ECSRO? or any other variation of SRO?
Answer:
NO, those bots are strictly made for iSRO.
-------------------------------------------------------------------------------------------------------------------------------------------------
