[HELP]server

[treica]

Hello EP i finish make a PServer with bane serverfiles 5.3 and after 6h "checking server please check notice board" my updater "cannot read the file c.25" .i tryed restart pc but nothing changed.All services still run but say me the same any ideea?

[JohnHeatz]

Did you put the /vchkoff /nprotectoff on the login and game?

[treica]

yes thats first what i did i played 6h after start to say me this

[hootzoo]

i had some thing like that and found out a file from my pc went in as a update and got a c 25 and then crashed test server lol... good time good time

[treica]

witch 1 is that?

[hootzoo]

well for me it was the client that got a bad file in it for got what it was tho....

but the updater did it work once but after that it didnt?

check all your .ini and check the maxconnections but if i remember right i think stock on those files is 5...

[treica]

dang i remake EP5 again with bane svr files and all worked ok...but when i restart pc i have open all ports commands on manager are added nprotect vhck set to off all ini files IP its public i use EP 5.3 game.exe gamewar not installed and i get this "failed to connect to the server" any idees what the problem could be? i used search button but no answer for that

[hootzoo]

are you on home pc or host?

[treica]

home pc

[hootzoo]

so do you got the the you edit the .ini to your ip or the 127.0.0.1 and all ports open but the 1433 and are you trying to play off the same pc? if so ill tell you what it is

[treica]

ports are open and and all ini where's PUBLIC IP is mine IP and i have 3x pc home.this 1 its direct to internet and 2x with router

[hootzoo]

here took this off EP and worked for me np at all but you need it to play on same ip and from same router

Step 1: Go to Run. Type in "hdwwiz.exe" and press enter.

Step 2: Select "Install the hardware that I manually select from a list" and press next.

Step 3: Scroll down to Network Adapters, press next.

Step 4: Click on Microsoft as the manufacturer, and choose the Microsoft Loopback adapter as the network adapter.

Step 5: Click next twice. Now the adapter is installed.

Step 6: Go to your network connections. (Not sure how to do this on all Windows. For Windows 7, go to control panel > Network and Internet > Network and Sharing Center, and on the left panel click "Change Adapter Settings". You should now see a list of your network adapters)

Step 7: Right click the Microsoft Loopback adapter and select properties.

Step 8: Untick everything except for Internet Protocol Version 4 (Or TCP/IP/IPv4)

Step 9: Click on the properties for the only thing ticked, choose to "Use the following IP address"

Step 10: In IP address, enter your WAN IP (), in Subnet Mask, enter 255.255.255.0

Step 11: Click on "Advanced..."

Step 12: Go onto the WINS tab.

Step 13: At the bottom, disable NetBIOS over TCP/IP.

Step 14: **IMPORTANT** Close out of everything so that the properties window is not there anymore.

Step 15: Instead of hex editing 127.0.0.1 into your game.exe, hex edit your "whatismyip.com" address instead. Now if you have been having the same problem as me, BOTH YOU AND YOUR CLIENTS WILL BE ABLE TO CONNECT!

[treica]

so i found the problem ps_game.ini chash when i put public IP with local 127.0.0.1 work all now i need a way to make game.ini to accept my IP

so i really did it to fix "failed to connect" put ur public IP if get this error shut down manager put 127.0.0.1 start it ,after shut down again and put ur IP back in game.ini after start all services and will work