that's the part that has to be visible
However, this shouldn't be the problem, autodefinitions are needed for repbutton and minimap, because of poorly written code
Why you dont set it to = false and define it by your own?
Gesendet von meinem SM-G920F mit Tapatalk
I have all tested, set the seamap values, the minimap values, the repair button values and put the lvl 4 carpenter while I own the lvl 5 I also tried with google Chrome, firefox and Internet Explorer 3 times for each Browser But still the same problem, I expect a new script update in July or later.
Thank you for your work and your help and good luck for the update
DB (31.05.2017 20:54:41): Settings:
DB (31.05.2017 20:54:41): AutoDefineSeamap: True
DB (31.05.2017 20:54:41): AutoDefineMiniMap: True
DB (31.05.2017 20:54:41): AutoDefineRepButton: True
DB (31.05.2017 20:54:41): AutoDefineURLbarAndLogOutButton: True
DB (31.05.2017 20:54:41): AutoChangeAmmo: False
DB (31.05.2017 20:54:41): Level5Carpenter: False
DB (31.05.2017 20:54:41): RefreshAfterMap: False
DB (31.05.2017 20:54:41): AttackMode: 2
DB (31.05.2017 20:54:41): FireKey: f
DB (31.05.2017 20:54:41): DriveKey: v
DB (31.05.2017 20:54:41): ToggleOpponentsKey: n
DB (31.05.2017 20:54:41): RepKey: q
DB (31.05.2017 20:54:41): ToShipKey:
DB (31.05.2017 20:54:41): AbortAttack: t
DB (31.05.2017 20:54:41): HollowsSlotNumber: 1
DB (31.05.2017 20:54:41): DoAllMaps: False
DB (31.05.2017 20:54:41): Map1SlotNumber: 7
DB (31.05.2017 20:54:41): Map2SlotNumber: 8
DB (31.05.2017 20:54:41): Map3SlotNumber: 9
DB (31.05.2017 20:54:41): Map4SlotNumber: 0
DB (31.05.2017 20:54:41): UpKey: 87
DB (31.05.2017 20:54:41): DownKey: 83
DB (31.05.2017 20:54:41): LeftKey: 65
DB (31.05.2017 20:54:41): RightKey: 68
DB (31.05.2017 20:54:41): HpPerc: 1
DB (31.05.2017 20:54:41): HpTol: 15
DB (31.05.2017 20:54:41): KeyWait: 10
CheckMoveWait Set To Greater Value
DB (31.05.2017 20:54:41): LoadVariables:
DB (31.05.2017 20:54:41): ClientDimensions: 1366x768
DB (31.05.2017 20:54:41): HpFull: 29440
DB (31.05.2017 20:54:41): MMship: 65280
DB (31.05.2017 20:54:41): MMNpc: 39423
DB (31.05.2017 20:54:41): CheckMoveWait: 3500
DB (31.05.2017 20:54:41): RandomWait: 100
DB (31.05.2017 20:54:41): StartWait: 5000
DB (31.05.2017 20:54:41): CorrectAmmo: True
DB (31.05.2017 20:54:41): CoolDownWait: 1150
DB (31.05.2017 20:54:41): MaxDist: 6
DB (31.05.2017 20:54:41): MinDist: 4
DB (31.05.2017 20:54:41): MinDist2: 4
DB (31.05.2017 20:54:41): DriveType: Down
DB (31.05.2017 20:54:46): PROCEDURE: Positions - START
Could not define seamap
Successfully executed
DB (31.05.2017 20:54:41): Settings:
DB (31.05.2017 20:54:41): AutoDefineSeamap: True
DB (31.05.2017 20:54:41): AutoDefineMiniMap: True
DB (31.05.2017 20:54:41): AutoDefineRepButton: True
DB (31.05.2017 20:54:41): AutoDefineURLbarAndLogOutButton: True
DB (31.05.2017 20:54:41): AutoChangeAmmo: False
DB (31.05.2017 20:54:41): Level5Carpenter: False
DB (31.05.2017 20:54:41): RefreshAfterMap: False
DB (31.05.2017 20:54:41): AttackMode: 2
DB (31.05.2017 20:54:41): FireKey: f
DB (31.05.2017 20:54:41): DriveKey: v
DB (31.05.2017 20:54:41): ToggleOpponentsKey: n
DB (31.05.2017 20:54:41): RepKey: q
DB (31.05.2017 20:54:41): ToShipKey:
DB (31.05.2017 20:54:41): AbortAttack: t
DB (31.05.2017 20:54:41): HollowsSlotNumber: 1
DB (31.05.2017 20:54:41): DoAllMaps: False
DB (31.05.2017 20:54:41): Map1SlotNumber: 7
DB (31.05.2017 20:54:41): Map2SlotNumber: 8
DB (31.05.2017 20:54:41): Map3SlotNumber: 9
DB (31.05.2017 20:54:41): Map4SlotNumber: 0
DB (31.05.2017 20:54:41): UpKey: 87
DB (31.05.2017 20:54:41): DownKey: 83
DB (31.05.2017 20:54:41): LeftKey: 65
DB (31.05.2017 20:54:41): RightKey: 68
DB (31.05.2017 20:54:41): HpPerc: 1
DB (31.05.2017 20:54:41): HpTol: 15
DB (31.05.2017 20:54:41): KeyWait: 10
CheckMoveWait Set To Greater Value
DB (31.05.2017 20:54:41): LoadVariables:
DB (31.05.2017 20:54:41): ClientDimensions: 1366x768
DB (31.05.2017 20:54:41): HpFull: 29440
DB (31.05.2017 20:54:41): MMship: 65280
DB (31.05.2017 20:54:41): MMNpc: 39423
DB (31.05.2017 20:54:41): CheckMoveWait: 3500
DB (31.05.2017 20:54:41): RandomWait: 100
DB (31.05.2017 20:54:41): StartWait: 5000
DB (31.05.2017 20:54:41): CorrectAmmo: True
DB (31.05.2017 20:54:41): CoolDownWait: 1150
DB (31.05.2017 20:54:41): MaxDist: 6
DB (31.05.2017 20:54:41): MinDist: 4
DB (31.05.2017 20:54:41): MinDist2: 4
DB (31.05.2017 20:54:41): DriveType: Down
DB (31.05.2017 20:54:46): PROCEDURE: Positions - START
Could not define seamap
Successfully executed
help me
You have to be in 800x600 and your gamescreen has to be clearly visible.
Quote:
Originally Posted by trolleras9
why turned off every auto definition? you could have misdefined the rep button and the minimap, also check the settings for carpenter lvl4 if you dont own the lvl 5
Whenever I use carp lvl 5 it always messes up, it starts repairing while still in range of the npcs so it stops repairing, then it goes to the corner while it's not repairing. After thinking it's done repairing it goes back to the npcs and after a few seconds starts repairing in range of the npcs and does everything over again. With other words, it never repairs to full, only 10k, then goes back to the npcs. Is it only me or?
DB (01.06.2017 20:45:26): Settings:
DB (01.06.2017 20:45:26): AutoDefineSeamap: True
DB (01.06.2017 20:45:26): AutoDefineMiniMap: True
DB (01.06.2017 20:45:26): AutoDefineRepButton: True
DB (01.06.2017 20:45:26): AutoDefineURLbarAndLogOutButton: True
DB (01.06.2017 20:45:26): AutoChangeAmmo: False
DB (01.06.2017 20:45:26): Level5Carpenter: False
DB (01.06.2017 20:45:26): RefreshAfterMap: False
DB (01.06.2017 20:45:26): AttackMode: 2
DB (01.06.2017 20:45:26): FireKey: f
DB (01.06.2017 20:45:26): DriveKey: v
DB (01.06.2017 20:45:26): ToggleOpponentsKey: n
DB (01.06.2017 20:45:26): RepKey: q
DB (01.06.2017 20:45:26): ToShipKey:
DB (01.06.2017 20:45:26): AbortAttack: t
DB (01.06.2017 20:45:26): HollowsSlotNumber: 1
DB (01.06.2017 20:45:26): DoAllMaps: False
DB (01.06.2017 20:45:26): Map1SlotNumber: 7
DB (01.06.2017 20:45:26): Map2SlotNumber: 8
DB (01.06.2017 20:45:26): Map3SlotNumber: 9
DB (01.06.2017 20:45:26): Map4SlotNumber: 0
DB (01.06.2017 20:45:26): UpKey: 87
DB (01.06.2017 20:45:26): DownKey: 83
DB (01.06.2017 20:45:26): LeftKey: 65
DB (01.06.2017 20:45:26): RightKey: 68
DB (01.06.2017 20:45:26): HpPerc: 1
DB (01.06.2017 20:45:26): HpTol: 15
DB (01.06.2017 20:45:26): KeyWait: 10
CheckMoveWait Set To Greater Value
DB (01.06.2017 20:45:26): LoadVariables:
DB (01.06.2017 20:45:26): ClientDimensions: 1920x1080
DB (01.06.2017 20:45:26): HpFull: 29440
DB (01.06.2017 20:45:26): MMship: 65280
DB (01.06.2017 20:45:26): MMNpc: 39423
DB (01.06.2017 20:45:26): CheckMoveWait: 3500
DB (01.06.2017 20:45:26): RandomWait: 100
DB (01.06.2017 20:45:26): StartWait: 5000
DB (01.06.2017 20:45:26): CorrectAmmo: True
DB (01.06.2017 20:45:26): CoolDownWait: 1150
DB (01.06.2017 20:45:26): MaxDist: 6
DB (01.06.2017 20:45:26): MinDist: 4
DB (01.06.2017 20:45:26): MinDist2: 4
DB (01.06.2017 20:45:26): DriveType: Down
DB (01.06.2017 20:45:31): PROCEDURE: Positions - START
Seamap Found at 560, 247, 1358, 862.
Minimap Found at 1238, 276, 1327, 365.
RepButton Found at 1129, 895, 1167, 933.
Hp not found. Make sure that you are FULLY repaired and that your Hp bar is FULLY visible
Successfully executed
i have full hp and he is visible fromt hour 12 don't work i want to make bonusmaps please help
it's cant start. its cant find hp bar. how can i fix it ? it's take me this message :
""SeaMap has been Manually Defined at: smx1 = 583, smy1 = 258, smx2 = 1376, smy2 = 870
Minimap has been Manually Defined at: mmx1 = 1435, mmy1 = 261, mmx2 = 1522, mmy2 = 348
RepButton has been Manually Defined at: repx1 = 511, repy1 = 770, repx2 = 546, repy2 = 805
Hp not found. Make sure that you are FULLY repaired and that your Hp bar is FULLY visible
Successfully executed""
the time i use scar bots i had to use firefox (not chrome) and manually define everything and it worked. ofc everything should be visible, but with chrome i think the bot cannot see it
I would like to optimize my bot this is why I would like to know the role of each of these functions
CheckMoveWait := ;
writeln('CheckMoveWait Set To Greater Value');
CheckMoveWait := ;
RandomWait := ;
CoolDownWait := ;
[Release] Seafight Custom Client! NEW! 02/13/2015 - Seafight - 968 Replies I fixed the problem with custom client :)
Updated 07/08/2014
New ships added
New island added
Background color changed
New ships added
Updated, 13/05/2014
Turtles color fixed
Turtle Hunter added
[Release] ShipwreckBot(No Custom Client) 01/13/2015 - Seafight - 68 Replies Hey all!!!
Since the event has started, i saw people asking for a shipwreckbot. I was working on npcbot but the "base script" was already ready. So i made some changes in range and bitmaps in order to shoot wrecks.
For one more time, i have to mention that more than half of the procedures belong to xRiDDi, so part of the credits go to him.
The bot is almost ready. Everything is working good, however if you find any bug report it here in order to be fixed as fast as possible.
What does it...
[RELEASE]Custom Client Background PSD 02/19/2010 - EO Weapon, Armor, Effects & Interface edits - 4 Replies I better not find this released ANYWHERE unless I've posted it.
:rtfm::rtfm::rtfm:
Here is the PSD to my custom client background.
Preview:
http://i46.tinypic.com/iwuk3q.png