[Free Guide] Manually spoofing serials

[Shane9301]

Originally Posted by theminkman

Yeah, totally understandable. For me, it's about staying undetected, not about how much effort it takes.

Most temp spoofers just load flagged drivers onto your system, spoof a few serials, then try to clean up and hide traces from EasyAntiCheat.

Manual perm spoofing is a cleaner approach, since you reinstall the OS after spoofing, wiping out any evidence of tampering.

You’re never going to avoid reinstalling Window, it’s the only way to truly start fresh.

and ruin your warranty , i built my pc recently i dont **** with perm spoofers

[theminkman]

Originally Posted by Shane9301

and ruin your warranty , i built my pc recently i dont **** with perm spoofers

You dont ruin your warranty if you backup ur factory serials, you can add me on Discord if you wanna know more

You are right about not ******* with permanent spoofers, but doing it urself is the best possible outcome.

Edit:

Guides updated, added images to monitor spoofing, did a small write-up on SMBios spoofing.

Added new parts to Part-List and released a small Requirement Checker application to see if you have the correct setup to use the spoofer

[Runabyte]

Originally Posted by theminkman

Yeah, totally understandable. For me, it's about staying undetected, not about how much effort it takes.

Most temp spoofers just load flagged drivers onto your system, spoof a few serials, then try to clean up and hide traces from EasyAntiCheat.

Manual perm spoofing is a cleaner approach, since you reinstall the OS after spoofing, wiping out any evidence of tampering.

You’re never going to avoid reinstalling Window, it’s the only way to truly start fresh.

Still, thanks for the guide! It's still worth checking especially to those who don't want to spend on spoofers

[theminkman]

Making progress on Automation


Currently writing the automatic SMBios spoofing application

[lort1234]

Very nice

[theminkman]

Been playing [EU] Facepunch 2
This is my result so far (with cheat + spoofer):



Worth mentioning that I am hardware banned but following every single step from my guide.

[perdah4o]

You are doing your monitor spoofing usermode with CRU. Any kernel AC will get your real serial number.
The only way to change it perm is to flash its firmware like bios one.

[xhzi]

Originally Posted by theminkman

Guides will be updated with images and in the future videos.

Currently I am working on a application that can do everything for you automatic to make it easier for everyone

how long till you have made an application for it cause like runabyte said people prefer less effort and in my case i like to put in barely any effort lmao

[sseft]

Hello, did you look into map1202 as an alternative to raid0, is it working?

[theminkman]

Originally Posted by perdah4o

You are doing your monitor spoofing usermode with CRU. Any kernel AC will get your real serial number.
The only way to change it perm is to flash its firmware like bios one.

Already checked on EAC by reading the hardware packet with Dopamine spoofer and Quantum spoofer they do not get ur monitor serial number after using CRU

EAC could start reading it directly from the monitor EEPROM if they wanted to, but the risk/reward isn't great and it could introduce potential instability issues

But if you want to be on the safer side grab a monitor without serial number

Originally Posted by sseft

Hello, did you look into map1202 as an alternative to raid0, is it working?

Nah, there is probably more ways to hide ur disk serial numbers but imo raid0 is the easiest

Originally Posted by xhzi

how long till you have made an application for it cause like runabyte said people prefer less effort and in my case i like to put in barely any effort lmao

It's free, I am not working on the application 24/7 since I also have a fulltime job IRL whilst trying to enjoy playing Rust wipes

Most of my progress is done towards end wipe when I tend to not play as much

[theminkman]

Updated guides

Please dont use Raid 0 if you are using a Intel CPU.
I also deleted the requirement checker for now since it needs to be recoded

You can Query Intel Disks inside a Raid pool IOCTL_SCSI_PASS_THROUGH / IOCTL_ATA_PASS_THROUGH to obtain disk drives real serial numbers

You can use this tool to check it for urself:


If you wanna cheat and still perm spoof I would recommend grabbing an anonymous drive from CaptainDMA, you can find more information in my part-list on the github:

[marlostan]

Instead of buying from CaptainDMA who obviously resells why not buy directly from the source?
Fanxiang 2TB NVME sells for 100$, hes selling a 512GB for 120$
The one I use and have spoofed 3 times so far for Valorant, no delay bans :



You can check other options here, look for ones with Maxiao MAP1202 controller.
If you need something to point u in the right direction I can send a few screenshots, not going to offer in depth support because its a 5 click process.

[theminkman]

Originally Posted by marlostan

Instead of buying from CaptainDMA who obviously resells why not buy directly from the source?
Fanxiang 2TB NVME sells for 100$, hes selling a 512GB for 120$
The one I use and have spoofed 3 times so far for Valorant, no delay bans :



You can check other options here, look for ones with Maxiao MAP1202 controller.
If you need something to point u in the right direction I can send a few screenshots, not going to offer in depth support because its a 5 click process.

Thank you for the tip, I am just using the information I have been given or found myself

I appreciate any person who would wanna contribute to the public spoofer

[theminkman]

Requirement Checker (updated)

Updated Requirement Checker will now warn for Intel Raid 0

Currently working on the spoofer application to make it more user friendly and automatic


ASRock is already completed

[Apu Nahasapeemapetilon]

Hey, thanks for this! Tho I checked your guide it says "unfinished" for smbios spoofing. What else are you planning to add/change?