[ RELAESE] FLY HACK

[azurenite]

Originally Posted by Cr0ssFad3

i still cant get it the mobs still can retaliate. can any help me out?

Remember that each time you move over a hill, bump or whatever, your value changes

*Your too low if your using normal attacks,
*Place yourself at a high value, where u can still see the mob but not see on radar
*Just use Skill attacks

[Phantomk22]

Well I scanned my name through and.. well.. just take a look at this SS



Once again.. any help is appreciated !
Thanks

[SatelliteKiD]

@phantomk22
right click each address, browse memory region then look for E9 and find the right address.

--
@topic
i changed the height to negative and it poooooof !

character selection failed. can't login my character..

anyone experience this?

[blindas]

anu ba yan ang liit ng image!!!!!!!!T_T

[stanne003]

im floating but the monster is still attacking me

[magg0t]

is this applicable on rfph? preferably bellato...

[broer]

yes....it works to all races...but I aint sure if RF-PH allowed CE running. Unless you have by pass the gameguard

[killemall]

if you want to find the E9... all those codes could be found in the attackspeed hack for launcher where you find the 80 3F...

[jingleincr]

OK I WILL ADD TO THIS THREAD, as you can see he didn't told us what the value of 17xxx means...

it is the height or the altitude of the terrain...

so for example the default of your 17443 in elan ground, put it to 17600 so that nobody could really see you... and of course when you get down juz go to a terrain which you think there are mobs cause if you get down on terrains that has no way or road in it u will be stuck but don't worry juz put back the altitude to 17600 and you can walk throughout elan w/o being seen... then if you have found your destination juz put your altitude at 17100 then put back the fly hack=233... and walaaaa your back to normal and you are in your destination... its nice to use this hack for hunting mobs deep in elan grounds specially when you have no dodge at all^_^

[broer]

Originally Posted by broer

Found it....so let me help u with text tut..

FINDING YOUR FLYING ADDRESS
1. Run CE
2. Target your bin file
3. Scan your character name using Value: Text
Eg. ABCDEFG (case sensitive)
4. after that u will end up with 5 or 6 addresses
5. right click each address and use Browse this Memory Region
6. Find bold with position like this.

XX XX XX XX XX XX YY XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX E9 XXXX XX XX XX XX XX XX XX XX
Note: YY address that keep changing everytime u log in

7. choose each of them and right click to add those addresses using 2 byte
8. Name E9 address as FLY or something else
9. Name YY as ALTITUDE
10. When you'r done....FLY will be shown as 233 (default setting)
11. ALTITUDE will be shown as random number 15000-17000 or others that's shown your current altitude.

HOW TO FLY
1. Freeze FLY and change the value from 233 to 201
2. Freeze ALTITUDE and (increase) add + value (80-100) from your current altitude
Eg. Current ALTITUDE 17555....change it to 17655 (1755+100=17655)

HOW TO GO UNDERGROUND
1. The same as FLYing just change your altitude to (decrease) -
Eg. Current ALTITUDE 17555....change it to 17455 (17555-100=17455)

HOW TO GO BACK ON THE GROUND
1. Unfreeze all (FLY and ALTITUDE)
2. Change the value of FLY from 201 to 233

NOTE: No matter go FLY or UNDERGROUND...othe rpeople will see you as walking on the ground

YOU SHOULD DO TRIAL AND ERROR TO TEST YOUR ALTITUDE AGAINST THE MOB THAT YOU'R TRYING TO ATTACK.
1. Increase ALTITUDE to +80 or +100 or until the yellow dot dissapear (not to far or you wont be able to hit the mob)
2. If the mob got HIT, you see the PT increase and the EXP increase...it means you'r CORRECT.
3. If you still got HIT by the mob, then run away using Keyboard mode and slightly increase your altitude by +5
4. Do STEP 3 until the mob wont HIT you anymore.

NOTE: Do Not move from your current location if the Land Texture is not FLAT

I hope this is the last TUT if you guys do not want to read thru the thread from the beginning....

@hiyoal pls close this thread....everything explained.

[Hiyoal]

#Closed

Hiyoal