pls post your codelines where you get the error ^^
none of error now. but when i run the programe and check the unfreeze checkbox it doesn't make my element client unfreeze. and why the method can worked at prophet. but not with me? i use the exactlt same code with prophet ause i use prophet method?
and this is the code that prophet use for the prophet bot
Code:
$CHK_FZ = GUICtrlCreateCheckbox("Unfreeze", 160, 469, 82, 8)
DllCall("UxTheme.dll", "int", "SetWindowTheme", "hwnd", GUICtrlGetHandle($CHK_FZ), "wstr", 0, "wstr", 0)
If IniRead($SOFTWARE_CONFIG, $CFG_EXTRAS_ROOT_KEY, $CFG_EXTRAS_FREEZE_KEY, "0") = 1 Then
GUICtrlSetState(-1, $GUI_CHECKED)
Else
GUICtrlSetState(-1, $GUI_UNCHECKED)
EndIf
Func SETGUIDATA()
If Not $PROCESS_ID Then Return 0
If GUICtrlRead($CHK_FZ) <> IniRead($SOFTWARE_CONFIG, $CFG_EXTRAS_ROOT_KEY, $CFG_EXTRAS_FREEZE_KEY, "0") Then
IniWrite($SOFTWARE_CONFIG, $CFG_EXTRAS_ROOT_KEY, $CFG_EXTRAS_FREEZE_KEY, GUICtrlRead($CHK_FZ))
If GUICtrlRead($CHK_FZ) = 5 Then
MEMWRITE(10439036, 1)
EndIf
EndIf
If IniRead($SOFTWARE_CONFIG, $CFG_EXTRAS_ROOT_KEY, $CFG_EXTRAS_FREEZE_KEY, "0") = 1 Then
$FZ = MEMREAD($APP_BASE_ADDRESSFZ)
If $FZ <> 1 Then
MEMWRITE($APP_BASE_ADDRESSFZ, $PROCESS_INFORMATION, "1")
EndIf
EndIf
EndFunc
Func MEMOPEN($PROCESS_ID)
Local $MID = DllCall($KERNEL32, "int", "OpenProcess", "int", 2035711, "int", 1, "int", $PROCESS_ID)
Return $MID[0]
EndFunc
Func MEMREAD($ADRESS, $TYPE = "dword")
Local $STRUCT = DllStructCreate($TYPE)
DllCall($KERNEL32, "int", "ReadProcessMemory", "int", $MID, "int", $ADRESS, "ptr", DllStructGetPtr($STRUCT), "int", DllStructGetSize($STRUCT), "int", "")
Return DllStructGetData($STRUCT, 1)
EndFunc
Func MEMWRITE($IV_ADDRESS, $AH_HANDLE, $V_DATA, $SV_TYPE = "dword")
If Not IsArray($AH_HANDLE) Then
SetError(1)
Return 0
EndIf
Local $V_BUFFER = DllStructCreate($SV_TYPE)
If @error Then
SetError(@error + 1)
Return 0
Else
DllStructSetData($V_BUFFER, 1, $V_DATA)
If @error Then
SetError(6)
Return 0
EndIf
EndIf
DllCall($AH_HANDLE[0], "int", "WriteProcessMemory", "int", $AH_HANDLE[1], "int", $IV_ADDRESS, "ptr", DllStructGetPtr($V_BUFFER), "int", DllStructGetSize($V_BUFFER), "int", "")
If Not @error Then
Return 1
Else
SetError(7)
Return 0
EndIf
EndFunc
Func MEMPOINTERWRITE($IV_ADDRESS, $AH_HANDLE, $AV_OFFSET, $V_DATA, $SV_TYPE = "dword")
If IsArray($AV_OFFSET) Then
If IsArray($AH_HANDLE) Then
Local $IV_POINTERCOUNT = UBound($AV_OFFSET) - 1
Else
SetError(2)
Return 0
EndIf
Else
SetError(1)
Return 0
EndIf
Local $IV_STRUCTDATA, $I
Local $V_BUFFER = DllStructCreate("dword")
For $I = 0 To $IV_POINTERCOUNT
If $I = $IV_POINTERCOUNT Then
$V_BUFFER = DllStructCreate($SV_TYPE)
If @error Then
SetError(@error + 3)
Return 0
EndIf
DllStructSetData($V_BUFFER, 1, $V_DATA)
If @error Then
SetError(8)
Return 0
EndIf
$IV_ADDRESS = "0x" & Hex($IV_STRUCTDATA + $AV_OFFSET[$I])
DllCall($AH_HANDLE[0], "int", "WriteProcessMemory", "int", $AH_HANDLE[1], "int", $IV_ADDRESS, "ptr", DllStructGetPtr($V_BUFFER), "int", DllStructGetSize($V_BUFFER), "int", "")
If @error Then
SetError(9)
Return 0
Else
Return $IV_ADDRESS
EndIf
ElseIf $I = 0 Then
DllCall($AH_HANDLE[0], "int", "ReadProcessMemory", "int", $AH_HANDLE[1], "int", $IV_ADDRESS, "ptr", DllStructGetPtr($V_BUFFER), "int", DllStructGetSize($V_BUFFER), "int", "")
If @error Then
SetError(3)
Return 0
EndIf
$IV_STRUCTDATA = DllStructGetData($V_BUFFER, 1)
Else
$IV_ADDRESS = "0x" & Hex($IV_STRUCTDATA + $AV_OFFSET[$I])
DllCall($AH_HANDLE[0], "int", "ReadProcessMemory", "int", $AH_HANDLE[1], "int", $IV_ADDRESS, "ptr", DllStructGetPtr($V_BUFFER), "int", DllStructGetSize($V_BUFFER), "int", "")
If @error Then
SetError(3)
Return 0
EndIf
EndIf
$IV_STRUCTDATA = DllStructGetData($V_BUFFER, 1)
Next
EndFunc
Func MEMCLOSE($MID)
DllCall($KERNEL32, "int", "CloseHandle", "int", $MID)
EndFunc
when i used that, i got error message like my previous post here the link to my post
so i change a little the code right here
MEMWRITE(@ScriptFullPath, 10439036, 1)
i added the @ScriptFullPath
1. why @ScriptFullPath? it is the path to your script (or .exe file)... oO
2. if you write a address it has to be in hex format. 10439036 = 009F497C in hex
the right format to write this address is with an 0x in front of the address: 0x009F497C
*edit:
if you only have the decimal address (10439036) you can convert it to the right format with: "0x"&Hex(10439036)
1. why @ScriptFullPath? it is the path to your script (or .exe file)... oO
2. if you write a address it has to be in hex format. 10439036 = 009F497C in hex
the right format to write this address is with an 0x in front of the address: 0x009F497C
i got the clue to add @ScriptFullPath to make the error gone. and it's gone.
an about the value and the pure code i use the same as prophet. check out the code that i get from prophet it worked on prophet bot not for me is that any other wrong?
if i look at this code you posed there are some things i don't understand ^^"
Code:
If GUICtrlRead($CHK_FZ) = 5 Then ;idk what the 5 means -.-| 1=Checked,4=Unchecked
MEMWRITE(10439036, 1) ;there's no handle to the process it should write to
EndIf
corect code should be
Code:
If GUICtrlRead($CHK_FZ) = 5 Then ;idk what the 5 means -.-| 1=Checked,4=Unchecked
MEMWRITE("0x"&Hex(10439036),$PROCESS_INFORMATION, 1)
EndIf
*edit:
but the latest code of prophet bot is working corect (code not exe) and all is right in there... idk from which version your code is ^^
if i look at this code you posed there are some things i don't understand ^^"
Code:
If GUICtrlRead($CHK_FZ) = 5 Then ;idk what the 5 means -.-| 1=Checked,4=Unchecked
MEMWRITE(10439036, 1) ;there's no handle to the process it should write to
EndIf
corect code should be
Code:
If GUICtrlRead($CHK_FZ) = 5 Then ;idk what the 5 means -.-| 1=Checked,4=Unchecked
MEMWRITE("0x"&Hex(10439036),$PROCESS_INFORMATION, 1)
EndIf
*edit:
but the latest code of prophet bot is working corect (code not exe) and all is right in there... idk from which version your code is ^^
hmm it doesn't seem worked too.
i used autoit ver 3.3.0.0
should i used the autoit ver 3.3.6.1. same like prophet used?
Hello, today prophet got crazy. Even if more then one time i tried to set mob list, it started to kill random mobs.. because i grind on some mobs on air, under them there are low lvl mobs, i have choosen only the fly mobs but after some kills it started targetting mobs on the ground. So i tried closing and opening the bot, but nothing changed. Any ideas about what happened?
Hello, today prophet got crazy. Even if more then one time i tried to set mob list, it started to kill random mobs.. because i grind on some mobs on air, under them there are low lvl mobs, i have choosen only the fly mobs but after some kills it started targetting mobs on the ground. So i tried closing and opening the bot, but nothing changed. Any ideas about what happened?
you should save the moblist first before you used it. and if you want to target the air monster you should check the Hunt By Name after you save mob ofcourse. and the prophet will attacking just the monster that got same name sa the moblist you just save. and it worked fine with me.
you should save the moblist first before you used it. and if you want to target the air monster you should check the Hunt By Name after you save mob ofcourse. and the prophet will attacking just the monster that got same name sa the moblist you just save. and it worked fine with me.
does anyone know how to find the offset for Max_PetHP and also offset for pet slot which is currently summoned ?
I've tried scanning a lot of nearby offsets from PetHP, but only found the pethp offset itself and no Max_PetHP offset/summoned PetSlot offset. It'd be useful so everytime we bot a veno, we won't need any setting at all, only [V] enable autopetheal and hotkey for pet heal spell.
thanks before.
*sorry if it's OOT, but I think it's still relevant because a new feature can be added to prophet bot with those offsets.
