Normal Commands
ascend - Moves you to the next platform above your position
clear - Clears the console
damage - Turns player damage on/off
defuse [all] - Defuses any TNT nearby which has been hit, drops 1 tnt in its place
descend - Moves you to the next platform below your position
destroy [all] - Destroys the current item
difficulty <LEVEL> - Sets the difficulty to the specified level (0-3)
dropstore - This command transfers everything in your inventory into a chest that it creates next to you.
duplicate [all] - Duplicates and drops the currently selected item stack
explode [SIZE] - Sets off an explosion in your current location.
extinguish|ext [all] - Puts out all nearby fire (or all fire)
falldamage - Turns fall damage on/off
firedamage - Turns fire damage on/off
goto <NAME> - Goto a waypoint
grow [all] - Grows all saplings/wheat on the map.
heal <HEALTH> - Heals a player the specified number of points
health <min|max|infinite> - Sets the health of a player to pre-defined figures
help [COMMAND] - Gives general help when COMMAND isn't specified, gives specific help when COMMAND is specified. Same as /h
home – Teleport to spawn point
instantmine - Turns instant mining on/off
item <ITEMCODE|ITEMNAME> [QUANTITY] – Gives player item, if quantity isn’t specified maximum amount of that item. Same as /give and /i
itemname - Use this command to discover the itemname and ID of your currently selected item.
itemstack <ITEMID> [QUANTITY] - Gives the player the specified quantity of maximum item stacks of the item.
jump - Moves you from where you are to where your mouse is pointing. Note: This command is buggy and may put you in the block you move to.
kill – Kills the current player
killnpc [all] - Kills all living creatures nearby.
listwaypoints - Lists all waypoints. Same as /l
msg <MESSAGE> - This commands adds a message to the console.
music [VOLUME] - Requests a music track to be played, there is a limitation of at MAX 2 tracks per day. Set the volume by specifying VOLUME.
pos – Gives current player position. Same as /p
rem <NAME> - Removes the specified waypoint
removedrops [all] - This command removes item drops from the world.
repair [all] - Repairs the currently selected item to full health
replenish [all] - Re-stocks your items in your inventory to the maximum ammount
return - Moves the player to the last position before teleport
search <SEARCHTERM> - Allows you to search for items using a name
set <NAME> - Mark a waypoint on the world
setjump [JUMP|reset] - Sets the height that you jump. Note: Turns fall damage off if the jump is configured to move than 1.
setspawn [<X> <Y> <Z>] – Set the current position as the spawn point, if X Y Z are specified sets that position as spawn point
setspeed [SPEED|reset] - Sets the speed that the player moves
spawn <NAME|ID|random|list> [QTY] - Allows you to spawn an individual creature.
spawnstack <NAME|ID|list|random> - Spawns the specified creature a few blocks away from your current position (use "/spawn list" to get a list of creature names and codes).
tele <X> <Y> <Z> - Teleport to X Y Z coordinates. Same as /t
time [set|get|day|night [minute|hour|day [TIME]]] - Set and get the time within minecraft.
timeschedule <reset | <TIME1> <TIME2>> - Sets a period of time (HH:MM format), this will make minecraft always within this time.
useportal - Instantly transfers you to the nether, use it again to go back.
waterdamage - Turns water damage on/off
World Edit Commands
//box <BLOCKID> - Creates a box between the two specified points
//contract <n|s|e|w|u|d> [DISTANCE] - Reduces the selected area in the direction specified
//copy - Copies the selected area
//expand <n|s|e|w|u|d> [DISTANCE] - Expands the selected area in the direction specified
//fill <BLOCKID> - Fills the selected area
//help [COMMAND] - Specific world-edit help
//load <FILENAME> - Loads a saved config file so that it can be pasted
//paste - "Pastes" the copied (or loaded) region to the south-west of you
//remove - Removes the selected region
//reset - Resets the selected region
//save [FILENAME] - Saves the selected region to file
//set1 - Sets one corner of the region
//set2 - Sets one corner of the region
//walls <BLOCKID> - Puts walls around the selected region
Normal Commands
ascend - Moves you to the next platform above your position
clear - Clears the console
damage - Turns player damage on/off
defuse [all] - Defuses any TNT nearby which has been hit, drops 1 tnt in its place
descend - Moves you to the next platform below your position
destroy [all] - Destroys the current item
difficulty <LEVEL> - Sets the difficulty to the specified level (0-3)
dropstore - This command transfers everything in your inventory into a chest that it creates next to you.
duplicate [all] - Duplicates and drops the currently selected item stack
explode [SIZE] - Sets off an explosion in your current location.
extinguish|ext [all] - Puts out all nearby fire (or all fire)
falldamage - Turns fall damage on/off
firedamage - Turns fire damage on/off
goto <NAME> - Goto a waypoint
grow [all] - Grows all saplings/wheat on the map.
heal <HEALTH> - Heals a player the specified number of points
health <min|max|infinite> - Sets the health of a player to pre-defined figures
help [COMMAND] - Gives general help when COMMAND isn't specified, gives specific help when COMMAND is specified. Same as /h
home – Teleport to spawn point
instantmine - Turns instant mining on/off
item <ITEMCODE|ITEMNAME> [QUANTITY] – Gives player item, if quantity isn’t specified maximum amount of that item. Same as /give and /i
itemname - Use this command to discover the itemname and ID of your currently selected item.
itemstack <ITEMID> [QUANTITY] - Gives the player the specified quantity of maximum item stacks of the item.
jump - Moves you from where you are to where your mouse is pointing. Note: This command is buggy and may put you in the block you move to.
kill – Kills the current player
killnpc [all] - Kills all living creatures nearby.
listwaypoints - Lists all waypoints. Same as /l
msg <MESSAGE> - This commands adds a message to the console.
music [VOLUME] - Requests a music track to be played, there is a limitation of at MAX 2 tracks per day. Set the volume by specifying VOLUME.
pos – Gives current player position. Same as /p
rem <NAME> - Removes the specified waypoint
removedrops [all] - This command removes item drops from the world.
repair [all] - Repairs the currently selected item to full health
replenish [all] - Re-stocks your items in your inventory to the maximum ammount
return - Moves the player to the last position before teleport
search <SEARCHTERM> - Allows you to search for items using a name
set <NAME> - Mark a waypoint on the world
setjump [JUMP|reset] - Sets the height that you jump. Note: Turns fall damage off if the jump is configured to move than 1.
setspawn [<X> <Y> <Z>] – Set the current position as the spawn point, if X Y Z are specified sets that position as spawn point
setspeed [SPEED|reset] - Sets the speed that the player moves
spawn <NAME|ID|random|list> [QTY] - Allows you to spawn an individual creature.
spawnstack <NAME|ID|list|random> - Spawns the specified creature a few blocks away from your current position (use "/spawn list" to get a list of creature names and codes).
tele <X> <Y> <Z> - Teleport to X Y Z coordinates. Same as /t
time [set|get|day|night [minute|hour|day [TIME]]] - Set and get the time within minecraft.
timeschedule <reset | <TIME1> <TIME2>> - Sets a period of time (HH:MM format), this will make minecraft always within this time.
useportal - Instantly transfers you to the nether, use it again to go back.
waterdamage - Turns water damage on/off
World Edit Commands
//box <BLOCKID> - Creates a box between the two specified points
//contract <n|s|e|w|u|d> [DISTANCE] - Reduces the selected area in the direction specified
//copy - Copies the selected area
//expand <n|s|e|w|u|d> [DISTANCE] - Expands the selected area in the direction specified
//fill <BLOCKID> - Fills the selected area
//help [COMMAND] - Specific world-edit help
//load <FILENAME> - Loads a saved config file so that it can be pasted
//paste - "Pastes" the copied (or loaded) region to the south-west of you
//remove - Removes the selected region
//reset - Resets the selected region
//save [FILENAME] - Saves the selected region to file
//set1 - Sets one corner of the region
//set2 - Sets one corner of the region
//walls <BLOCKID> - Puts walls around the selected region
#credits to simo_415 for the fantastic mod
damn, das wollte ich gestern posten doch dann hab ich mir es anders überlegt.
Das ist echt ein geiler Single Player MOD, der ist so verdammt nützlich (L)
naja egal, trotzdem danke.
Kann einer ne Anleitung auf Deutsch machen, bei mir klapps nicht bitte.
Kriegt auch Thx
Quote:
1. Go to the minecraft bin directory and backup minecraft.jar
2. Using 7zip or equally capable ZIP viewer open minecraft.jar
3. Delete the META-INF folder
4. Copy the class files contained within the mod to minecraft.jar, replacing the existing files.
5. Enjoy the mod.
So viel Englisch muss man ja verstehen können das man die Minecraft.jar mit einem Archivprogramm wie 7zip oder Winrar öffnet und dann denn Meta-Inf. Ordner löscht und die Dateien vom Mod reinkoppiert
So viel Englisch muss man ja verstehen können das man die Minecraft.jar mit einem Archivprogramm wie 7zip oder Winrar öffnet und dann denn Meta-Inf. Ordner löscht und die Dateien vom Mod reinkoppiert
Da is ja auch mein Problem,
Wo soll ich die 3 Dateien reinkopierren?
Ich möchte ma fragen ob man die SPC auch für 1.3.2 nutzen kann. Da in 1.3.2 die Cheats auch im offiziellen (nicht gemoddeten) Minecraft drinne sind ist sehr wahrscheinlich dass man so die SPC nicht mehr braucht. Da die SPC aber viel umfangreicher sind als die "Befehle" vom offiziellen Minecraft möchte ich diese wieder InGame sehen. Wenn jemand solche für 1.3.2 gefunden hat, sowie auch getestet hat kann mir doch bitte eine Private Nachricht senden mit der Downloadlink.
Mw2 Trainer for Single player 07/05/2011 - Call of Duty - 4 Replies Credits:
Special thanks to dark byte of cheat engine
H4XOR of SiC - who make the function
deathtrooper30 - video
(Ovenran) - Posting :D
Description:
=============================
This trainer was made by
SC ENGINE
Problem mit Single Player 05/13/2010 - Diablo 2 - 10 Replies nunja leute habe vor ner woche mit bnet aufgehört und meinen ganzen kram @jsp verkauft...
jetzt möchte ich aber ein bisschen single player zocken und hab nicht unbedingt bock zu lvln sondern möchte erstmals nur paar chars ausprobieren...
mein problem:
hab mir paar chars vom inet runtergeladen und in den "save" ordner gepackt.....
jedoch tauchen sie nicht im menü auf^^
Archlord Single player ^^" ? 04/06/2010 - Archlord - 8 Replies i have seen some vids how to make a server that runs only on your own pc WoW , Aion and so on
they did that in a few minutes
full world, mobs, npc's.
so is it possibe to do that with archlord too ?
if yes plz tell me how ^^ or post a link cos i didnt found something about it
:D
greets loona
Single Player Conquer 2.0 08/25/2006 - Conquer Online 2 - 11 Replies So I was thinking,
Diablo has both single and online player modes, why can't CO?
The coder (not me for now) could make their own server emulation program to act as the "server", basically just adding AI to the client side. The user would have complete control over drops and whatever else they need.
This project would be massive, you're basically programming a single player game, but it would be awesome just to have it at a LAN party with whatever stuff you wanted just messing...