First off, if you don't know what Overclocking is, do not continue. Please read up on Overclocking your GPU before continuing with this. This CAN damage your card if done wrong, I am not liable or responsible in any way if you harm your card. ATItool is built for ATI and Nvidia graphics cards, if you are using anything else, I'm sorry but it probably won't work.
If you are only experiencing Overheating problems due to fan regulation, only follow steps 1 - 3.
1. Download EVGA Precision and ATItool 0.26 for XP users 0.27b for Vista users. (Google them)
2. Open EVGA Precision and ATItool in Admin mode on Vista
3. Bring up EVGA Precision, Un-click the "Auto" next to the Slide labeled "Fan Speed" then slide the slider up until you run at about 49 - 55 degrees Celsius, don't go beyond 80% and press Apply on the left.
4. Switch over to ATItool and press in the bottom right area "Scan For Artifacts".
5. Switch back to EVGA Precision and move the Core Clock (Leaving them linked) slider in increments of 15 then press Apply.
6. Look at ATItool, there will be a window to the left and at the bottom it will say "No errors found for ##:##:##" (the number will increase as time goes on, it's a watch basically) or you will hear a beeping and see yellow bars appearing when you have gone to far and it will say "Errors Found".
7. Continue switching back and forth between EVGA Precision and ATItool increasing by 15 until you hit the part where you error, once you error decrease by 15 and hit apply.
Start Mabinogi and see how well you perform on FPS, you should see a general difference. If you are still not satisfied, you CAN (I do not recommend it) clock your Fan Speed to 100% and continue overclocking your GPU, if you need to overclock above 80% fan speed, you should probably buy a new Graphics card.
This is useful on Oblivion. I have Nvidia 5200 on my Dell, and I can't buy a better one, because the others don't fit on this computer. Thanks Aldeel. Two thumbs up from me.
Overclocking 01/08/2011 - WarRock - 52 Replies Dazu habe ich schon viel gehört, nur nirgendswo
ein Tut zu gefunden.
Wer weiß wie´s geht?
Wie viel % Overclocking ist unschädlich für den PC?
Wie viel % Overclocking fällt nicht auf?
Mit welchem Programm mach ich das?
Bitte um Antworten :D
bester overclocking air lüfter? 11/18/2010 - Technical Support - 26 Replies Hey ich suche den besten lüfter fürs overclocking. Preis spielt keine rolle hauptsache gute kühlung :)
Overclocking 11/02/2010 - Technical Support - 13 Replies Hi,
also ich wollte meinen core 2 duo von 1,8 ghz mit hilfe der anleitung von chip.de auf 2,4 ghz takten. Min CPU ist der intel core 2 duo e4300 der auch bei chip.de verwendet wird. mein Mainboard ist fujitsu siemens ms-7293VP. meine Fargen wäre ob es wie bei chip beschrieben wird gut läuft oder ob mein pc dann komplett abkackt und nix mehr geht. aso hab 4 gb ram ( 3 benutzbar wegen 32 bit)
Overclocking 08/22/2007 - Off Topic - 31 Replies So hab nun nen neuen PC. Und der muss schneller laufen =D
Hat jemand Erfahrung im OC von C2D ?
Overclocking 10/06/2006 - Off Topic - 13 Replies ich hatte langeweile und habe meine graka ins schwitzen gebracht :)
gpu takt:269 mhz (original: 200 mhz,overclock: 34%)
speichertakt: 269 mhz (original: 166 mhz,overclock 62%)
http://img170.imageshack.us/img170/8025/overclock ingpe1.jpg
schon etwas grobe pixelfehler
http://img154.imageshack.us/img154/2444/overclock ing1xc3.jpg