2.09 In Game Working Final Gracia

[aqwzsxedc]

then you system folder should be ******, delete it and do a full check with lineage2.exe, it'll creat and download a new Gracia Final system folder. Then do the L2.bin rename

[aris2855]

it work for me.ty all.but when i check seed in walker my char do nothing.any1 know anything about this?pls i need help.is any trick with seeding?ty

[slyguy27]

I have been using this for a few days, but i cannot seem to get it to buff my guy. He will buff my friends char, but not me. We have tried everything:autodetect, me running it, him running it, leaving the name box blank, spelling my name correct with capitals, and incorrect. It just doesn't seem to buff my char no matter what. I guess i'll just have to wait for new crack.

[specialblend]

I can log in, it says verify fail but if I start, the char runs to mobs.

But, i cannot setup anything else, I mean i dont see skills, dont see items nothing... so i cannot use it ofc

lets hope for new crack 2.12 :P

[mousehunter]

i am having same problem. will not verify. in other ctrl it says verify ok, but in sys chat it says verify failed and i cannot start combat plz help

[abc16]

i had issues when i used the crack with 2.09's dat files or whatever(no skills)...then my friend sent me his from version 2.05 and i saw my skills again..you can try that to see skills.

[RosuC]

Working, I have some small problems but in generally is working fine, at least my Warlock is doing well - targeting, pet buffs, healing and cure.
Nice work, thank you

[bkidz]

i am using 2.09b
but cant use potion (hv no healing potion to choose),
always stuck when hit rock or tree
help me plzzz

[AspireBEL]

Where are the range settings? cant find it anywhere

[mrpwnz]

hello today i wanted to start playing on l2.ru
but suddenly when i wanted to log in with walker ive seen that theres only a l2.bin,
now i renamed my l2.bin to l2.exe but when i want to run it nothing happens,
any solution for my problem or maybe som1 who can help me out with bottin on l2.ru?

[przemuus]

why my bot doesnt see mana potion ?

[stancool]

Originally Posted by mrpwnz

hello today i wanted to start playing on l2.ru
but suddenly when i wanted to log in with walker ive seen that theres only a l2.bin,
now i renamed my l2.bin to l2.exe but when i want to run it nothing happens,
any solution for my problem or maybe som1 who can help me out with bottin on l2.ru?

man.. I am Russian... and its is 10000 times harder to bot there then you think it is because russian official has its own defence system... called FROST (ShieldConsole.exe) file and you simply cant bot there =) or its really hard and it gets fixed every week....

[Skeltah]

This is my first post, I am using this walker and there seems to be a lot of confusion how to run it correctly.

ALL MEMBERS OF YOUR GROUP SHOULD BE ON YOUR FRIENDS LIST, FOR BUFFING HEALING ECT. THIS WILL ENSURE HE BUFFS, HEALS CORRECTLY. IT WILL ALSO ALLOW YOU TO SET UP A OUT OF PARTY BUFFER OR HEALER.

FOR EACH OF YOUR BOTS HIT HOME> THEN GO TO POLICY> AT THE TOP OF THE POLICY SCREEN YOU WILL SEE FAR ATTACKS, AND SHORT ATTACKS, SET FAR ATTACKS TO 5000000 AND SHORT ATTACKS TO 50000, THIS WILL ALMOST COMPLETELY REMOVE THAT RUNNING TO MOBS AND NOT HITTING. SELECT WHICH ATTACK SETTING YOU WANT BY PUTTING A CHECK IN THE BOX, FOR EXAMPLE "USE FAR SETTING" OR "USE MELEE SETTINGS"

Installing the Walker
-Download the Walker from a reputable source.
-Use WinZip or Win Ace or something to unzip the files.
-It doesn't matter where you unzip it to, just make sure you know the location of the walker.
-Now, go into your C://> Program Files> Lineage II> In this folder you will see the LineageII.bin, simply rename this to LineageII.exe
-Run the Walker from the file you unzipped it to, and select the path to the LineageII.exe you just set.
-The walker is now fully functioning besides for a few collision bugs, but it works.


Setting up the walker for your Main Character

-Once your in game, you will need to be running in windowed mode, if you arn't then hit ALT+enter. This will window the game.
-Now hit the HOME key. This will bring up your bot configuration screen.

Under BASIC OPTIONS > towards the bottom you might want to set the "Dead Logout Delay" This way when your bot dies he automatically logs and doesn't just lay there.

Under HEAL OPTIONS > the middle box says HP|MP Protect, put a check in the first box, it looks something like [ ]HP<[ ]%,use pots. This means when your health reaches this % your char will automatically use health potions. So put a check in the first box, then the health % you want him to use the pots. I normally put it to 85%. Make sure use in combat is checked, and the delay is 10 seconds. This will allow him to use pots in battle, and allow him to spam them until his health is above 85%.

BUFFS this is self explanitory however, UNCHECK "AUTO Detect" this feature is no longer working. If it's a 20minute buff then set the delay to 1200, if its a 5min set it to 3000. Rather then setting it to automatically "sense" when your buff is up, just set it where every 20 minutes, or every 5 minutes he buffs regardless of status.

If Auto Detect is checked, your char will buff and rebuff continuously.

PARTY SETTING, since this is your main character, and probably the tank for the group, you will want him to protect the other members of the group. Down towards the bottom you will see "Member, Other" Under this you will see "Protectmember" select the names in the drop down box of the chars you want him to protect. This means if the char takes aggro he will instantly attack that mob to pull the aggro off.

Next is PATHING, this is a little more difficult because the collisions detection is all jacked up now, so your bots will get stuck on just about everything now. Sometimes in the top box you will need to put a circle in the box for "Define PathPoint". Then in the bottom also put a circle in "Define Path Point" then you will basically move a short distance, click .CurPoS. with a radious, of say 200-500, then move to another spot and do it all over again, until you have basically drawn a square, or rectangle in the area with the mobs. Your chars will then roam this path looking for mobs at each point you set. this works good when there are a lot of obstacles, but its still not perfect and you will get stuck.

The next best way would be to select "Define Range" in the top box, then at the bottom select Define Range. This is going to allow you to draw out the area that your char will attack mobs in. This works great when there are no obstacles, such as Catacombs. Just start in a corner, click CurPos, then add, and move around the room. Every once in awhile go to the MAP, located on the options bar on the left, towards the bottom to look at the range you are defining.

After you have done all this, you can now go back to "OTHER CTrL" at the top of the side bar, here you will see a box labeled "Setup". go to the save block, select your characters name from the drop down box, and click .Save. This will save your characters settings and speed up your set up process when you log on, especially if your hunting in the same area, just get him there and turn the walker on. From this same screen you see right under where you just saved your char, it says .STOP Bombat and .Stop Auto FUN and it gives you the hot keys for those actions. This is how you turn on and off your walker. After you have him all configured, turn him on, then just use the Insert key on your keyboard to toggle between on and off.

FOR YOUR BUFFER AND HEALER
Follow a similar set up as your main character, except now your going to spend a bit more time in your Party options. I like my bots to follow me around and perform simple tasks while I'm playing, then when I feel like leaving i just turn on my main character and the rest of the bots just do their thing following him.

PARTY SETTING: Under the "Follow Setting" put a check in ACTIVE FOLLOW with a follow distance of 0-10, this will keep him pretty close, I would configure each bot slightly differently here, so that way you don't run around with a pile of bots running ontop of each other. Then jus down from that you will see "MEMBER and OTHER" here is where you will configure your bots to either just follow, by leaving Active Follow attack unchecked, or to have them attack what ever your main char is attacking by checking it. If you are attacking with your buffer or healer, make sure to check "Dont Solo Counter Attack Monsters" This leads to your healer taking aggro and running off to fight.

PARTY BUFFS, this is simple, just select the buffs you want, UNCHECK Auto DETECT!, set the minute delay to the duration of the BUFF, leave MP at 0, this will allow your buffer to buff until he's outta mana, if you choose against this set the MP option. Then, select the names from the list you want your bot to buff, and he will as soon as you turn the bot on, even if he's out of party. Thats the reason its important to have all your chars on your friends list.

PARTY HEAL, put a check in the first box, then at what %of health you want him to cast his heals, keep a check in the next box, this will let him heal in combat, next box is for the MP, if left at zero he will heal until he's out of mana, and finally the name of the char you want him to heal. I also set the auto Res towards the bottom where if my tank happens to die my healer/buffer will res him. Then you can set him to also cure poison ect.

If you have a caster in your group, following your tank, you will need to go to POLICY, and at the bottom set him to use his spells, and when the target reaches a certain % of health use's direct attack.

Hopefully this helps,

If someone finds a better working walker for Final Gracia please let me know, but for now this one is 96% functioning.

[PoPoB@G]

can someone reupload this?