[Share] L2Walker Gracia Ct 2.2 (is this that you looking for?)

[emir0n]

official

[oracle67]

This Gracia Final bot system it works in ANY server tested so far (even official).
Read and follow the steps.
Have a good botting time.

[pedrim]

Originally Posted by oracle67

This Gracia Final bot system it works in ANY server tested so far (even official).
Read and follow the steps.
Have a good botting time.

Hey dude, can u say me what server is that?
i want to try to start on a new server but i don't find any good server =/
and u can say if this is a good server ? ehhe

tnx dude +tnx

[aaar]

does it work with Gracia Final?

[smokey64]

Originally Posted by GALADR1EL

Oracle can you tell me how I can set shoulshots and blesedspirit shots with L2Net OOG version

use the items tab trait = always
item = whichever you use(can scroll through inventory to pick)

[x714n]

i want ask for server indonesian---> not work, so?TX

[oracle67]

It works wherever is tested so far except obvious antibot using servers.
Read carefully how to use the L2Walker with tcptunnel, depended of the configuration is its functionality.
About "HowTo" for the L2NET check the official site for the system requirements and updates, the use of both bot systems at the same time is possible but not recommended.
Works perfect in XP and Vista any version.
For Windows 7 so far the only bot works fine is L2NET.

I wish luck and good boting time to everyone.

[alitakos]

For wich server is this walker??

[oracle67]

It works for ANY server (depended of the client you run).
If you run Gracia then works to Gracia, If Gracia 2 then works Gracia 2, If Gracia Final then works Gracia Final.
The Important matter is that here it is a OOG walker working now under that conditions.
Take that tool and use it freely, have a good luck and good boting time.

[funt1k]

omg, how u use it? i configured microsoft loopback adapter with ip 192.168.1.12 and netmask 255.255.255.0, and change forward.bat "tcptunnel --local-port=2106 --remote-host=77.120.193.137 --remote-port=2106 --stay-alive" 77.120.193.137- ip l2 server.
add record about l2authd and other in hosts (when i ping l2authd.lineage2.com answer come back from 127.0.0.1) and when i run l2walker (under administrator) and then push run button and when i am log in ti the game i press "home" and see "verify field". windows vista bis. pls help me any body. server is gracia final no l2j deiceland.org
sorry for my bad english.

[oracle67]

Originally Posted by funt1k

omg, how u use it? i configured microsoft loopback adapter with ip 192.168.1.12 and netmask 255.255.255.0, and change forward.bat "tcptunnel --local-port=2106 --remote-host=77.120.193.137 --remote-port=2106 --stay-alive" 77.120.193.137- ip l2 server.
add record about l2authd and other in hosts (when i ping l2authd.lineage2.com answer come back from 127.0.0.1) and when i run l2walker (under administrator) and then push run button and when i am log in ti the game i press "home" and see "verify field". windows vista bis. pls help me any body. server is gracia final no l2j deiceland.org
sorry for my bad english.

Where is the server page to register an acc?
I think it works but acc isnt autocreate.

[osio1313]

Yo everyone.
I have vista system and my host file look like that:

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.


So where should i put those ip's ?

[oracle67]

Just make it looks like this:

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
127.0.0.1 l2authd.lineage2.com
127.0.0.1 l2testauthd.lineage2.com
192.168.1.12 nprotect.lineage2.com


or maybe save your old hosts like "hostsORIGINAL"
and make a new one only like this:

127.0.0.1 l2authd.lineage2.com
127.0.0.1 l2testauthd.lineage2.com
192.168.1.12 nprotect.lineage2.com

i hope i helped.

[osio1313]

hahah you are da one dude !
thx a lot for guide, files and help with hosts everything is working fine

[oracle67]

Originally Posted by osio1313

hahah you are da one dude !
thx a lot for guide, files and help with hosts everything is working fine

It is possible to have problems (sometimes) if the server ping is high, then go to
Home>Policy>Short Attacks>check Melee setings the distance that your xp area is and not the defoult.

Have a great boting time.