Walker OOG 10.9.0 WORKS AGAIN!!

Tault_sillicon · 04/24/2008, 00:39

UPDATE!! 24-04-2008 17:54

-=-=-=-=-=--=-=-=--=-=-=-=-=--=-=-=-=-

1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.

use the IP adress 192.168.1.12 and subnetmask 255.255.255.0

-------------------------------------------------------------------

put this in your host file:

192.168.1.12 L2authd.Lineage2.com
216.107.242.199 L2authd.lineage2.com
127.0.0.1 localhost
127.0.0.1 vip.tt2xz.com
127.0.0.1 vip1.tt2xz.com
127.0.0.1 vip2.tt2xz.com
127.0.0.1 vip3.tt2xz.com
127.0.0.1 vip4.tt2xz.com
127.0.0.1 vip5.tt2xz.com
127.0.0.1 vip6.tt2xz.com
127.0.0.1 vip7.tt2xz.com
127.0.0.1 vip.towalker.com
127.0.0.1 vip1.towalker.com
127.0.0.1 vip2.towalker.com
127.0.0.1 vip3.towalker.com
127.0.0.1 vip4.towalker.com
127.0.0.1 vip5.towalker.com
127.0.0.1 vip6.towalker.com
127.0.0.1 vip7.towalker.com
192.168.1.12 L2authd.Lineage2.com

not really sure witch one is working but it have it like this!

---------------------------------------------------------------------

also use the TCPTunnel that is in the guide above!!
u can also a TCPTunnel.exe somewere on the net (easy to find) and make a TCPTunnel.bat file (make a TXT file put the line in it and rename to .BAT ) and put this in it:

tcptunnel --local-port=2106 --remote-host=216.107.242.199 --remote-port=2106 --stay-alive

---------------------------------------------------------------------

---------------------------------------------------------------------

<--- EDITED MY OWN WALKER + CRK

---------------------------------------------------------------------

set.ini in walker 10.9.0 folder (just replace the info i put below with that what i posted, leave the other server info... DON'T DELETE THAT!!)
[USA]
LoginServerIP=L2authd.Lineage2.com
LoginServerPort=2106
ProtocolVersion=828
ServerList=[1]Bartz;[2]Sieghardt;[3]Kain;[4]Lionna;[5]Erica;[6]Gustin;[7]Devianne;[8]Hindemith;[9]Teon;[10]Franz;

---------------------------------------------------------------------

UPDATED!!

let me know iff it works... iam on my work rigth now and i try to remember all but its hard because i don;t have my comp here look iff iam right.

Greets

Sillicon

ps. thank me plz

RamenNoodles · 04/24/2008, 01:43

hmm

You sure it works?

10.90 OOG

18:35:17 »¶Ó*Ê¹ÓÃÐÐÕß¡£
18:35:17 Link LoginServer Succeed.
18:35:20 Login LoginServer Success.
18:35:20 服务器[07]当前在线率:17.32%,能否登陆:能
18:35:23 Link GameServer Succeed.
18:35:23 ->Login GameServer Fail.

thats what i get. with xzcrk.
anyone confirm?

secrets · 04/24/2008, 01:52

same thing. but with the other post in IG 1.98 and chineese and **** it verifies! time to try to get an english translator in there... how the **** do i do that LOL

Tault_sillicon · 04/24/2008, 06:52

well i have botted all night long... when iam back from work i will post my Walker here and the xzcrk... be sure u have loopback adapter installed and your host file ok.

Greets (walker 10.9.0 u can find on towalker.com) the crk is downloadable here or (let me look for a link)
Site is for now offline... when iam back from work i will post it here same with tunnel, host file and crk

Greets

carinoo · 04/24/2008, 08:41

@Tault_silicon
Could you pls put the guide on how to install/configure loopback adapter... thanks in advance

servus · 04/24/2008, 10:23

Quote:

Originally Posted by carinoo

@Tault_silicon
Could you pls put the guide on how to install/configure loopback adapter... thanks in advance

it is a bypass like the chinese do it too =P have fun!

nikolayyyyy · 04/24/2008, 10:43

i download:
ogg bot from towallker.com
cracks from vpnbot.com
i install loop adapter and ghange host file (my L2j server do not use hosst file)

and.... it is not work

please help

Tault_sillicon · 04/24/2008, 12:01

1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.

use the IP adress 192.168.1.12 and subnetmask 255.255.255.0

-------------------------------------------------------------------

put this in your host file:
192.168.1.12 L2authd.Lineage2.com

---------------------------------------------------------------------

also use the TCPTunnel that is in the guide above!!
u can also a TCPTunnel.exe somewere on the net (easy to find) and make a TCPTunnel.bat file (make a TXT file put the line in it and rename to .BAT

) and put this in it:
tcptunnel -listenport 2106 -tohost 216.107.242.199 -toport 2106
pause

---------------------------------------------------------------------

---------------------------------------------------------------------

<--- EDITED

---------------------------------------------------------------------

let me know iff it works... iam on my work rigth now and i try to remember all

but its hard because i don;t have my comp here

look iff iam right.

Greets

Sillicon

ps. thank me plz

Tyon · 04/24/2008, 12:21

Tested - Didnt worked

Tault_sillicon · 04/24/2008, 12:28

i will post a fix then when iam at home again. i don;t have everything on my work u know. one n thing is for sure. i works

@Carino: let me know iff u have trouble installing or iff it works or not.

@Freedome: let me know what he does/doesn't.. give me some feedback plz like whats the error?

nikolayyyyy · 04/24/2008, 12:48

maybe it is not work because xzcrk.exe is for ogg 10.9.0 and ogg walker is 10.9.1

Tault_sillicon · 04/24/2008, 13:01

indeed use oog 10.9.0.... did i post 10.9.1?

edit:

try again plz

edit:

Tault_sillicon · 04/24/2008, 14:11

updated the info... should work now... let me know iff it does/ doesn't. let me know with error iff it doesn't. i know its more then a week that it worked but it works again really

Tyon · 04/24/2008, 14:36

Well still the same error:

14:30:50 »¶Ó*Ê¹ÓÃÐÐÕß¡£
14:30:50 Link LoginServer Succeed.
14:30:53 Login LoginServer Success.
14:30:54 服务器[01]当前在线率:8.60%,能否登陆:能
14:30:56 Link GameServer Succeed.
14:30:56 ->Login GameServer Fail.

Btw. your foward.bat cant work.

You are using some wrong commands. It should look like this:
tcptunnel --local-port=2106 --remote-host=216.107.242.199 --remote-port=2106 --stay-alive

Otherwise tcptunnel will return an error.

nikolayyyyy · 04/24/2008, 14:46

this is error when i start tunnel

i have one :

tcptunnel --local-port=2106 --remote-host=216.107.242.199 --remote-port=2106 --stay-alive

but ogg bot do not work also

edit:

15:45:26 »¶Ó*Ê¹ÓÃÐÐÕß¡£
15:45:26 Link LoginServer Succeed.
15:45:29 Login LoginServer Success.
15:45:29 服务器[01]当前在线率:35.60%,能否登陆:能
15:45:31 Link GameServer Succeed.
15:46:01 ->Login GameServer Timeout.