L2 Walker 10.9.0 OOG How TO GUIDE(off/priv)

xenosaga21 · 02/19/2008, 07:31

For OFFICIAL USA SERVERS IT IS SIMPLE
Required FILES:
L2 Walker 10.9.0

AND ws2_32.dll

Optional Downloads
L2Walker SOUND ALERTS Courtesy of Blackartist

Place the ws2_32.dll into your L2 Walker 10.9.0 Directory Folder...
Then Edit your Host file located in C:\WINDOWS\system32\drivers\etc\hosts
Add the Following Line
192.168.1.12 L2authd.Lineage2.com

No Tcp Tunnel / or Loop Back adapter needed Just Launch L2Walker 10.9.0
and it should Verfiy.
If you want to Play on a Different (NON AMERICAN) Server but (STILL OFFICIAL) Ie: Europe . . . You will need to do the same thing as bellow treating it like a private Server .... using the OFFICIAL Ip address of your Choice in the place of XX.XXX.XXX.XXX . . . . .

Now the tricky Part . . . and some explanation to help you understand whats going on . . .
TO GET THIS TO WORK ON A PRIVATE SERVER!!!! it is a Little more Tricky

You Will need Microsoft Loop Back Adapter, installed and configured to 192.168.1.12 . . . and You will need Tcp Tunnel... Let me say why. . .
ws2_32.dll Effectively acts like Tcp Tunnel . . . but it Redirects by default to the standard USA Lineage 2 Auth Server IP Address... I am not yet capable of editing or creating custom ws2_32.dll's to work on private servers. . . if you know how to edit or create your own ws2_32.dll all you would need to do is to change the Usa Ip inside that dll to the one of your private Server.
If you know how to create / edit ws2_32.dll I would love a guide so that I could learn something new. . . But For now I have devised a work around

which simple works be redirecting the information being sent to USA L2AUth to the Private Server of your Choice. . . .

I hope that was clear... was just a simple explanation of what is going on...
NOW to get L2Walker 10.9.0 to work on a private Server.....
You will again NEED
L2WAlker 10.9.0

AND ws2_32.dll

TCPTUNNEL

Step1: Edit Host File to redirect all information to L2walker and your Private server. . . (this assumes that you are playing on a CT1 L2J server that uses a HOST file to connect rather than a patch to the system folder )

add to host file
192.168.1.12 L2authd.lineage2.com
192.168.1.12 L2testauthd.lineage2.com

216.107.242.199 xx.xx.xxx.xxx

EXPLANATION:
192.168.1.12 L2authd.lineage2.com
192.168.1.12 L2testauthd.lineage2.com
Bellow since the DLL file Directs traffic flow to USA OFFICIAL we need to Redirect all Traffic away from USA OFF to YOUR PRIVATE SERVER's IPxxxx..
216.107.242.199 xx.xx.xxx.xxx <-----Insert Private Servers IP....

Now to set up the Microsoft Loop Back adapter....
Bellow an Excerpt from my previous post on How to do that correctly.
Now It is time to setup the Loop Back adapter to grant it the required Ip Address 192.168.1.12 we do this by first (In vista) right click on the Network tray icon , and clicking "Network Sharing Center" Ounce we are there you click on the right side "manage Network Connections" and look for the Microsoft Loop back adapter. . . right click on it and select properties then select Ipv4 and click properties again and enter in the required fields as shown bellow.
Configuring Loop Back adapter Step 1

Configuring Loop Back adapter Step 2

Configuring Loop Back adapter Step 3

Configuring Loop Back adapter Step 4

Configuring Loop Back adapter Step 5

The Loop Back adapter should Now be Functioning Perfectly. . .

NOW YOU MUST EDIT THE TCPTUNNEL FORWARD.BAT TO FORWARD TO YOUR PRIVATE SERVERS IP.....

Now To Configure TcpTunnel

Open the Included Forward.Bat File and edit it to have Your Private Servers Ip ADDRESS....

tcptunnel --local-port=2106 --remote-host=xxx.xxx.xxx.xxx--remote-port=2106 --stay-alive

xxx.xxx.xxx.xxx = Your Private Servers Ip ADDRESS.
Now Run the forward.bat and Launch L2 Walker....

This Guide Is no where near as clear as my First and I apologize I didn't have much time to prepare it. =/

PS: This should also allow L2Walker IG to WORK... as a byproduct.

IF You want to play without WALKER just run the Forward .bat while playing L2 or edit your host File and put a # symbol in-front of the modifications.

PS: A problem I have had in Other SERVER type operating systems is that IPV6 Causes a conflict in the last option where you select to edit the settings for the loop back adapter i suggest disabling Ipv6 by un-checking it and enabling/disabling the adapter . . . this fixed an issue I had that the device would not become ready . . ..

So just go there and uncheck the one that says internet protocol version 6. . . . if its there.

I hope atleast half the people that read this will manage to get it working on first try . . . anyways GOOD LUCK / Have Fun CHeating on worthless Private Servers XD Like ME LOLZ.

xenosaga21 · 02/19/2008, 07:48

Have FUN ALL LOL LOL LOL

goWoot · 02/19/2008, 18:02

Jebus now its ******* going to be fixed again.

blackartist · 02/19/2008, 19:23

nice guide, not tried it but your other guide rocked. One question though can I syill use the older version of walker, or can that be easily detected now? (the version I am cyrrently using is: eL2Walker1.92)

baasje · 02/19/2008, 22:35

Its a really nice guide! thank you for it

but i have a problem, i can get it vetrified and can login with it,
but just when the NPC, Mobs and players appear on the map i can a packet error. any idea on this how to fix it?

Code:

22:26:51 »¶Ó*Ê¹ÓÃÐÐÕß¡£www.ToWalker.com
22:26:51 Link LoginServer Succeed.
22:26:55 Login LoginServer Success.
22:26:55 服务器[01]当前在线率:20.00%,能否登陆:能
22:26:57 Link GameServer Succeed.
22:27:02 ->Enter Char[1].
22:27:06 Packet Error ...

xenosaga21 · 02/19/2008, 23:27

Hmm What chronicle is the server your playing on . . . sounds like its not CT1 . .
or that it is using a custom protocol Version . . . possibly. . . you might have to change the protocol version in the set.ini to match your server. ?

This guide is a Rough way to get it all working its not 100% Fool Proof but with a little tinkering it can get walker verified on any server. . . I wish I had the time to make it simpler. . .

crickengst · 02/20/2008, 07:31

Hi new to the forums today, and so far seems really nice! I tried your explanition for oog walker and it seems to have worked fine. After, I left walker running and tried to run another client of l2<without walker> and it hangs at connecting to server. So over all the problem is I cannot run l2 and walker at the same time. IO have to edit the host file each time to go back and forth to l2 and walker, any suggestions on how to fix it. Great guide by the way! This is for Retail usa server just to be clear

Thanks for your expertise!

zergrez · 02/20/2008, 10:24

ig works for me but when i am trying to use oog i have link verifyserver fail.pls help!

goWoot · 02/20/2008, 11:42

Quote:

Originally Posted by crickengst

Hi new to the forums today, and so far seems really nice! I tried your explanition for oog walker and it seems to have worked fine. After, I left walker running and tried to run another client of l2<without walker> and it hangs at connecting to server. So over all the problem is I cannot run l2 and walker at the same time. IO have to edit the host file each time to go back and forth to l2 and walker, any suggestions on how to fix it. Great guide by the way! This is for Retail usa server just to be clear Thanks for your expertise!

tcptunnel has to be running.

xenosaga21 · 02/20/2008, 14:14

Theres probably a better way to do this but I have not gotten around to finding it. . . -_-. . . for now this will have to do.
And YES TcpTunnel has to be running and for Private servers you need LoopBack....

kira77 · 02/20/2008, 14:44

Please,walker for L2Reloaded? THX!!!!!!!!!!!!!!!!!!!!!

tilenko · 02/20/2008, 16:29

where can i see priver server ip?
i'm playing on tehgamers

xenosaga21 · 02/21/2008, 01:21

Close all internet Browsers/Ventrilo Turn everything off that accesses the internet.

Then connect to your server . .. Minimize (alt Tab) and on Windows PC click Start -> RUn -> type CMD hit Enter
In the command prompt type Netstat and it will list all the Ip addresses that your computer is connected to. . . on of them will be the L2Server you play On.

crickengst · 02/21/2008, 01:22

Btw guys im speaking for retail server not private. Ill try to do the tcp tunnel thing anyway though thanks for responses^^

.

xenosaga21 · 02/21/2008, 01:44

Quote:

Originally Posted by crickengst

Btw guys im speaking for retail server not private. Ill try to do the tcp tunnel thing anyway though thanks for responses^^ .

I would reply much more efficiently if this site would load faster ( shrug)
Look to my other post near the middle top I have all the official server IP's listed
me and someone else found them out a while ago...

Update: (thanks netgus for getting Ip Locations)
216.107.242.199 - USA, texas
222.231.15.60 - Korea
61.90.252.194 - Tailandia
61.215.117.129 - Japan
203.70.16.32 - Taiwan

IT is by Nation.