L2Walker 1.92 [ IN - Game ] How To GUIDE!

[xenosaga21]

DOES NOT WORK ANYMORE
DOES NOT WORK ANYMORE
DOES NOT WORK ANYMORE
DOES NOT WORK ANYMORE


What You Will NEED!
1.) L2 Walker 1.92 Download Here:

or New L2 Walker IG 1.94

2.) TCPTUNNEL Download Here:


Optional Downloads :
L2 Walker Maps
Updated Maps (The good Stuff)


L2Walker Sound Alerts courtesy of Blackartist.

Information You will Need Possibly.
Bellow is a List of all the Auth Server Ip addresses
North America : 216.107.242.199
Don't Know what country this : 61.215.117.129
Don't Know what country this : 61.90.252.194
Don't Know what country this : 222.231.15.60
Taiwan China :203.70.16.32
Update: (thanks netgus for getting Ip Locations)
216.107.242.199 - USA, texas
222.231.15.60 - Korea
61.90.252.194 - Tailandia
61.215.117.129 - Japan
203.70.16.32 - Taiwan


You Will need to Edit your Host File Located in:
C:\WINDOWS\system32\drivers\etc
(open the host file with Notepad)

Add this Line at the Bottom blank space of your Host File.
192.168.1.12 L2authd.Lineage2.com


Now we will setup the Microsoft Loop Back adapter
Step 1:
Right Click My Computer -> Click properties -> Go to the Device Manager
When The Device Manager Opens Right Click on The Name of Your Pc and Click "Add Legacy Hardware"


Click Next and then Click add Hardware Manually -> choose Network Adapters -> Then choose Microsoft as the Manufacturer and then On the Right Side Choose "Microsoft Loop back adapter"

As Bellow Image Shows


Finish the Installation off.
Now It is time to setup the Loop Back adapter to grant it the required Ip Address 192.168.1.12 we do this by first (In vista) right click on the Network tray icon , and clicking "Network Sharing Center" Ounce we are there you click on the right side "manage Network Connections" and look for the Microsoft Loop back adapter. . . right click on it and select properties then select Ipv4 and click properties again and enter in the required fields as shown bellow.
Configuring Loop Back adapter Step 1

Configuring Loop Back adapter Step 2

Configuring Loop Back adapter Step 3

Configuring Loop Back adapter Step 4

Configuring Loop Back adapter Step 5


The Loop Back adapter should Now be Functioning Perfectly. . .

Now To Configure TcpTunnel

Open the Included Forward.Bat File and edit it to have YOUR NATIONS Lineage 2 Auth Server Ip ADDRESS (One from The list Above) (I am Not sure what nations as which try them all. . . maybe one will work for you. . . )

The Bellow forward.bat is pre configured for USA NORTH AMERICA
tcptunnel --local-port=2106 --remote-host=216.107.242.199 --remote-port=2106 --stay-alive

216.107.242.199 = North American L2 AUth Server Change it to your nations Auth Ip!.

Now Run the forward.bat and Launch L2 Walker (which will ask you to find your l2.exe)

When you get in game, Press Home on your keyboard to Bring up L2 walker and Check in the General settings tab if Verify = Ok
If it says Verify = Fail You did something Wrong.





If you share this guide please give credit and don't say you did all the organizing / translating of all the garbage out there. . .
If followed correctly this will 100% Work with Walker 1.92 In CT1 OFFICIAL.

Have Fun.


ps: If you want to play without Walker you can put a # sign next to the Host file entry to make it work without walker. . .this disables walker but lets you play again as normal without the tcptunnel.......
DOES NOT WORK ANYMORE
DOES NOT WORK ANYMORE
DOES NOT WORK ANYMORE
DOES NOT WORK ANYMORE

[xenosaga21]

THAT IS HOW YOU WRITE A **** GUIDE ON HOW TO USE SOMETHING!
NOW STOP ASKING FOR THE SAME **** Over an OVER AND STOP SPREADING SPYWARE !

THE ABOVE works 150% And if it doesn't Work for you ! YOU DID SOMETHING WRONG!

Here is a Link to learn How to use all Of L2 Walkers Features Including Basic Scripting !

[GAKimbro]

Lol very nice man thanks for that

[xenosaga21]

This Forum is so SLow / Messed up they should really get some Moderators. . . it could actually be a respectable forum then . . . and maybe less people would cry about virus ridden garbage.

The Only thing I couldn't Find is What Each Server Ip Address is . . . I found each Ip address but I couldn't figure out what country they belong to . . . so whoever needs there nations Ip Auth Address has to do some trial and error.


PS:! Can Some 1 Else Scan The TcpTunnel.exe I scanned it 3 times and seems safe but it is NOT my file so I don't Know if its 100% Safe . . i Have been Using it for the past 2 Days without any Signs of a virus but you can never be too careful so Scan everything you DL!

[GAKimbro]

I did this easily and I'm using windows XP so it's a little different just add in the info from darkmenx's post

-- 1. How to install the Microsoft Loopback adapter in Windows XP
##################################################

1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.
##################################################

Then go to my network places, view network connections, right click the loopback adapter go to properties, highlight Internet Protocol TCP/IP and click properties, enter in the IP info from Xeno's last screenshot and follow the rest of the post then all done. Took me 5 minutes.


Edit: I scanned TCP Tunnel.exe also 3 times and it's clean.

[xenosaga21]

ALL the information was here on the forum and on other forums and Diff languages . . . just people don't type clearly in English and most people don't understand , then they do it all wrong and ask a million questions then the useful information gets buried under a sea of garbage . . . I tried to make it easy for anyone to install Thanks for throwing in the Windows xp method . . . I was gona do that but was lazy XD . . . and figured most people could get to there network settings. . . ( if you don't know how to get to your network settings you have no business even trying to bot lol)

This is it then anyone who needs L2 walker Should just read this thread. . . I think it can't get much more clear on how to bypass L2 walker Verification.

I hope theres a way to sticky this so it doesn't fill up with spam.

[spirell]

tnx. nice work. hope it lasts

[Cutiemasta]

cant get it working :/ i think im pasting it wrong at set.ini, i put it before path or after?

[xenosaga21]

B4

Where are you getting stuck?
Did u edit the host file ?
Did u install loopback?
Did u configure tcptunnel?

[Cutiemasta]

yes i did everything right, i know how to set up a lootback and all, but the only step i didnt knew how to do was that one, im also logging from vista, but i play from a laptop, maybe that have a problem. could u tell me how it should be the set.ini.

[xenosaga21]

Actually you dont really need to set anything in the l2 walker set.ini Now that I think about it.

What Walker Version are you using ? The one In guide?

IT sounds like your problem is with the tcptunnel. . . if you setup the loop back correctly .

When you execute the forward.bat does it stay open? Or does it shut down right when you launch it?

It really sounds like you didn't configure the forward.bat to match your auth.

Can you still connect to L2 without Walker after doing all the steps? If so somethings is wrong with the host file.

Are you Playing from Usa? Or another nation?

as Other nations may have something like for example
l2auth.lineage2.com.cn for china in the host file.

I can't test This for settings for nations outside NorthAmerica sadly because I don't have access to those servers nor do I want to take the time.

[Cutiemasta]

Got it working now, thx a lot.

[spirell]

I dont get the "add legacy" option. could help me as to why?

[VIPsushi]

it works !!!
please can you explain why it works ? ... im curious to know the mechanic behind your ingenious fix.

^^

[netgus]

TY a LOT Xeno...

It works perfectly.
Only wanna to be sure I use the European server ^^.. will try to indentify.

TY again
G.