GW1 Bots working in July 2017

[calypso974fire]

Originally Posted by xitooo

vaettir run take festive item? and what its the equipament and build? thx

Yes it does, i'm looting Grog atm.

for the equipment:
armor full blessing +1 +3 shadow
shield +10 vs earth dmg
weap ench +20% +5 energy

the build will be loaded by the bot but here you are :OwVUI2h5pvO8Id2BkAiAvpLBTAA

[Ttrader]

Originally Posted by Lillebror_1

can some 1 update this? it keeps dieing when it try to run to the farming spot

Hey do you have the builds for this and the Whirling Fiber bots(I didn't see them in the code)? I'll take a look at them and see if I can figure out what's going on.

[Ttrader]

Originally Posted by calypso974fire

[Vaettir Bot]

[Feather bot D/Mo]

I tried to use this bot but it didn’t work.
It run to the mobs, cast ench and sometime hit 1 or twice but then it stopped without finishing the mobs.
If I help him attacking, the bot pick up the loots and move to the next group.

I’m a terrible VoS since I never played it myself. Can someone help me with it ?

Hey, I had to rewrite quite bit to get it to work but it does. It's not great but it rarely fails.

The one main issue that I haven't been to figure out yet is you have to shut it down with the task manager when you are done.

I also made it so it stores all the rune drops so you can id and salvage them later.

Let me know if it works for you!

[DerMoench14]

The GWA².au3 and the AddsOn.au3 are pretty outdated (Packet Header and Offsets), you shouldn't use it!

[calypso974fire]

Originally Posted by DerMoench14

The GWA².au3 and the AddsOn.au3 are pretty outdated (Packet Header and Offsets), you shouldn't use it!

That's good to know, thanks ! What are we supposed to use then ?

@: Thanks for your work on it. I did update it on my own too, but i had an issue with the yeti: when i target the nearest foe, if the nearest foe is a Mountain Yeti, i cannot kill it with the monk supporting him.

I tried quickly with the GWA² and the AddsOn to get the name of the target and to swich target to kill the Monk first, but i couldn't succed.
How did you do it ?

[DerMoench14]

Enjoy it.

If you wanna kill the Monk first you should target him by Profession, not by Name.

 Spoiler

Func GetNearestEnemyToPlayerByProfession($aProfession)
	Local $lNearestAgent, $lNearestDistance = 100000000
	Local $lDistance
	Local $lAgentArray = GetAgentArray(0xDB)

	Local $aAgent = GetAgentByID(-2)
	Local $lID = DllStructGetData($aAgent, 'ID')

	For $i = 1 To $lAgentArray[0]
                If DllStructGetData($lAgentArray[$i], 'ID') = $lID Then ContinueLoop
		If DllStructGetData($lAgentArray[$i], 'Allegiance') <> 3 Then ContinueLoop
		If DllStructGetData($lAgentArray[$i], 'Primary') <> $aProfession Then ContinueLoop
		If DllStructGetData($lAgentArray[$i], 'HP') <= 0 Then ContinueLoop
		If BitAND(DllStructGetData($lAgentArray[$i], 'Effects'), 0x0010) > 0 Then ContinueLoop

		$lDistance = (DllStructGetData($aAgent, 'X') - DllStructGetData($lAgentArray[$i], 'X')) ^ 2 + (DllStructGetData($aAgent, 'Y') - DllStructGetData($lAgentArray[$i], 'Y')) ^ 2
		If $lDistance < $lNearestDistance Then
			$lNearestAgent = $lAgentArray[$i]
			$lNearestDistance = $lDistance
		EndIf
	Next

	SetExtended(Sqrt($lNearestDistance))
	Return $lNearestAgent
EndFunc   ;==>GetNearestEnemyToPlayerByProfession

Profession:
0 	None
1 	Warrior
2 	Ranger
3 	Monk
4 	Necromancer
5 	Mesmer
6 	Elementalist
7 	Assassin
8 	Ritualist
9 	Paragon
10 	Dervish

For the closest Enemy Monk you just call it this Way:
$MonkTarget = GetNearestEnemyToPlayerByProfession(3)

[calypso974fire]

thanks for you quick answer.
Actually, i don't want to kill it first, it's just that the bot updated by myslef was unable to kill the Mountain Yeti with the monk supporting it.
So it was just blocked until i changed manually the target.

I just tested the bot posted by Ttrader and it did not block for 120 mins/15 runs.
So i guess the issue was taken care of in his code. i did not open it so far to see how he did it.

[PtiKyou]

Is there a vanguard farm that we can exploit for Eotn ?

[kuduku]

someone having a fiber bot working ?

[Lillebror_1]

wich line / code is it to change the salv stuff? i dont want my vaettir to salv +5 armor to bow + 10+pierce and staff. wich number/line or y how do i change it? i love the bots except that those small changes^^ its the vaettir who salv for iron granite dust and so on

[Pwnchap]

I have a working fibre bot, but I had to buy it.. It does work immaculately, though.

A lot of these bots lack instructions.. Like the EOTN Vanq bot, for LB + SS, it needs two quests and start at Remains of Sahlahja. But, if you like me, have already finished the two quests, you're screwed apparently.
It completed the run, but for 38 points.. per run.. and I need 15.000.. NO THANKS

The Luxon farm didn't work at all, but the EOTN_VQ Luxon part seems to be doing okay with slight babysitting.

Kilroy often gets stuck, anybody experience that?

Didn't try the LDOA, as I used another that went from 2/3 to 10, and then 10-20. Worked very well, no hiccups. But needed an update for the GWA2 file.

Can anybody else chime in with some feedback ?

Please note, the Kilroy bot does well with slight babysitting (it gets stuck), and it'll run you about 10 plat an hour, as well as keep going till you hit the Normal Mode cap at 80k Dwarf Points. Bot does NOT do Hard Mode in my experience.

[calypso974fire]

here is my feedback on the bots:

- Kilroy: no issue reported on my side (never got stuck) but i used it only a few times
- Mont Qinkai: works perfectly fine - farmed 8M points with it
- Chest Bot: works perfectly fine in HM
- DoA (Stygian): get stuck at start sometime (hard to zone to Stygian) and i after die after the second ball. And since it does not pickup loots after each spike, i lose the gems. I should improve this
- JQ Kurzick: works, but often leave the game and get disonored so i stopped using it
- ReFeather (Seitung feather as Rt): works perfeclty fine
- TOC: works perfectly fine
- Seitung Feather Farming: had trouble with it but i fixed it + Ttrader posted a better version of it

[Pwnchap]

Originally Posted by calypso974fire

here is my feedback on the bots:

- Kilroy: no issue reported on my side (never got stuck) but i used it only a few times
- Mont Qinkai: works perfectly fine - farmed 8M points with it
- Chest Bot: works perfectly fine in HM
- DoA (Stygian): get stuck at start sometime (hard to zone to Stygian) and i after die after the second ball. And since it does not pickup loots after each spike, i lose the gems. I should improve this
- JQ Kurzick: works, but often leave the game and get disonored so i stopped using it
- ReFeather (Seitung feather as Rt): works perfeclty fine
- TOC: works perfectly fine
- Seitung Feather Farming: had trouble with it but i fixed it + Ttrader posted a better version of it

Please Calypso, enlighten me on the Luxon farm. Is it the standalone one or the EOTN VQ one?

JQ Kurzick - I don't have any problems with it, but you might be facing issues if you're using Toolbox.

[calypso974fire]

I'm using the standalone one.

I'm not using Toolbox when using bots. too many things at once

@: sorry i did not have many time to work on the bot atm but here is a quick correction you can make:

Open Vaettir 2\gwApi\Inventory
Do a backup of the file if you want.

Go to function WeaponMods at line 781
Comment mods you want to remove (add a ";" in front of the line)

Change the size of the Array in order to match the number of item you left in it.
ex:
original array: the size is [4] because their is 4 items in the list. Dont touch the [2]

   Local $lPrefixArray[4][2] = [ _
						['1414F823',5], _ ; Sundering (bow)
						['01001825',26], _ ; Zealous (sword)
						['01001825',32], _ ; Zealous (daggers)
						['01001825',35]] ; Zealous (scythe)

Update array: the size is [1] because i commented 3 of the item -> only one remaining

   Local $lPrefixArray[1][2] = [ _
	;					['1414F823',5], _ ; Sundering (bow)
	;					['01001825',26], _ ; Zealous (sword)
	;					['01001825',32], _ ; Zealous (daggers)
						['01001825',35]] ; Zealous (scythe)

I'm not familiar with the full function atm so leave at lease 1 item per array.

My current function store Zealous for scythe, perfect ench for scythe, fortitude for shield, +10 vs piercing dmg and +5 energy. If you are ok with those mods, just replace the WeaponMods function by this one bellow:

 Spoiler

Func WeaponMods($aItemPtr)
   Local $lPrefixArray[4][2] = [ _
					;	['1414F823',5], _ ; Sundering (bow)
					;	['01001825',26], _ ; Zealous (sword)
					;	['01001825',32], _ ; Zealous (daggers)
						['01001825',35]] ; Zealous (scythe)
   Local $lSuffixArray[6][2] = [ _
					;	['05000821',5], _ ; of defense (bow)
					;	['1400B822',26], _ ; perfect enchanting (staff)
					;	['1400B822',27], _ ; perfect enchanting (sword)
					;	['1400B822',32], _ ; perfect enchanting (daggers)
						['1400B822',35], _ ; perfect enchanting (scythe)
						['001E4823',24]] ; of fortitude (shield)
   Local $lInscriptionArray[3] = [ _
						'0A0118A1', _ ; +10 armor vs piercing dmg
						'0500D822', _ ; +5 energy inscription
					;	'0500B820'] ; +dmg, -energy Brawn over Brains
   $lModStruct = MemoryReadStruct($aItemPtr + 16, 'ptr;long')
   $lMod = MemoryRead(DllStructGetData($lModStruct, 1), 'byte[' & DllStructGetData($lModStruct, 2) * 4 & ']')
   $lType = MemoryRead($aItemPtr + 32, 'byte')
   For $i = 0 To 1
	  If StringInStr($lMod, $lPrefixArray[$i][0]) <> 0 And $lType = $lPrefixArray[$i][1] Then Return 1
   Next
   For $i = 0 To 1
	  If StringInStr($lMod, $lSuffixArray[$i][0]) <> 0 And $lType = $lSuffixArray[$i][1] Then Return 2
   Next
   For $i = 0 To 0
	  If StringInStr($lMod, $lInscriptionArray[$i]) <> 0 Then Return 3
   Next
EndFunc   ;==>WeaponMods

[lyscir]

I think I may try the kilroy bot, but if it has the same issue as one I've tried in the past, there's sometimes when you get to the room with a circle of stone summit the bot will not aggro right and will become stuck. I think the problem for that room is the bot runs too far back. I will try the bot here and see if it has that same issue.