Quick & Easy DMA Buying Guide

[0x41^4]

Originally Posted by Razzy211

Hey 0x41^4 I just flashed my macku and left and right port were both successful but then when plugging it the correct way the macku installer was saying disconnected and I had no CH343 in my device manager so then I plugged everything into normal USB2.0 and everything worked I’m on v2.7_1 The only thing that didn’t work was the mouse test command but other than that it was working on my main PC is everything fine? Am I good to go and I only have 2 green lights on the left side.

[Razzy211]

Originally Posted by 0x41^4

This is the exact video I watched and got everything working but the command mouse test didn’t work it didn’t move my mouse but my mouse still works if that makes sense lol

[0x41^4]

Originally Posted by Razzy211

This is the exact video I watched and got everything working but the command mouse test didn’t work it didn’t move my mouse but my mouse still works if that makes sense lol

If the mouse is working, just roll with it. If you run into problems, drop a message in the MAKCU Discord’s #broken-mouse channel and plenty of people there can walk you through it.

[Razzy211]

Originally Posted by 0x41^4

If the mouse is working, just roll with it. If you run into problems, drop a message in the MAKCU Discord’s #broken-mouse channel and plenty of people there can walk you through it.

Will do brother appreciate it

[DemonTimee]

Originally Posted by 0x41^4

The second monitor doesn’t matter, it doesn’t need to match your main one.

DisplayPort is the better option, but some people don’t have enough DP ports, so HDMI works as long as your monitor and the fuser both support HDMI 2.1. HDMI 2.0 only goes up to 100Hz, thus the need for HDMI 2.1.

The DMA card goes into the slot on your main PC, not the second PC. The second PC’s job is to run the cheat and send the overlay through the fuser to your main PC (monitor), along with anything else.

I saw a video that said the monitors need to have the same refresh rate so you can mirror them, so that's false? I currently don't have a 2nd monitor, so I will need to buy one. It doesn't matter at all?

My Mobo on my main PC has two display port slots so I should be fine, I'm assuming.

Appreciate your assistance.

[0x41^4]

Originally Posted by DemonTimee

I saw a video that said the monitors need to have the same refresh rate so you can mirror them, so that's false? I currently don't have a 2nd monitor, so I will need to buy one. It doesn't matter at all?

My Mobo on my main PC has two display port slots so I should be fine, I'm assuming.

Appreciate your assistance.

Nope, that’s not how it works at all. First off, you don’t even need a second monitor. But if you want one for an external view instead of using a laptop screen, it can be whatever you want. You’ll just want a second one so you can manage everything on the second PC, unless you plan on constantly switching inputs on your main monitor while setting things up.

[DemonTimee]

Originally Posted by 0x41^4

Nope, that’s not how it works at all. First off, you don’t even need a second monitor. But if you want one for an external view instead of using a laptop screen, it can be whatever you want. You’ll just want a second one so you can manage everything on the second PC, unless you plan on constantly switching inputs on your main monitor while setting things up.

Interesting. I appreciate this, i'm in search for a decent Mini PC right now. I will keep this all in mind.

[Havocaveli]

So this would cost me less than 680 €

1.,
2.
3.
4.FW
5. 2.PC

I'd play on 2560x1440 @ 144Hz got a Ryzen 5600x & a RTX 3070.

Is my buying list correct? Is the 2. PC good enough? cost 249€ on Aliexpress

[moddingu15]

Thoughts on this DMA provider? Prices seem comparable to Aliexpress.

[0x41^4]

Originally Posted by Havocaveli

So this would cost me less than 680 €

1.,
2.
3.
4.FW
5. 2.PC

I'd play on 2560x1440 @ 144Hz got a Ryzen 5600x & a RTX 3070.

Is my buying list correct? Is the 2. PC good enough? cost 249€ on Aliexpress

Everything looks fine except the firmware. Stella just released a statement about their T3 version. Check the announcement in their Discord and open a ticket with them if you have any questions.

Originally Posted by moddingu15

Thoughts on this DMA provider? Prices seem comparable to Aliexpress.

Usually sellers like this tack on another 30–50 dollars for shipping, so I’d check their shipping fees first.

They’re still priced higher than vendors on Aliexpress, so it’s really up to you. I’ve also never heard of them, so I can’t speak to their communication, shipping, or anything else.

[Havocaveli]

Originally Posted by 0x41^4

Everything looks fine except the firmware. Stella just released a statement about their T3 version. Check the announcement in their Discord and open a ticket with them if you have any questions.

i just read it... i seriously just want to play battlefield and cod but now im facing another problem... im reading everywhere B550 is mostly not compatible... do you have another suggestion for the fw? im honest i dont wanna get into it doing it myself

[0x41^4]

Originally Posted by Havocaveli

i just read it... i seriously just want to play battlefield and cod but now im facing another problem... im reading everywhere B550 is mostly not compatible... do you have another suggestion for the fw? im honest i dont wanna get into it doing it myself

You don’t need their EAC firmware for Battlefield or COD, just use the basic option.

If it’s not on the site yet, open a ticket for it. If they aren’t taking basic orders right now, Cyber-ammo’s basic option works too.

Or you can just use a free firmware like Ekknods.

As for the B550, yeah, it has a security driver that blocks DMA. You’d need to swap out your motherboard.

[Havocaveli]

alright thanks talked to an staff from hv who has the same motherboard without problems his fw is from dmak. thank you mate

[0x41^4]

Originally Posted by Havocaveli

alright thanks talked to an staff from hv who has the same motherboard without problems his fw is from dmak. thank you mate

DMA Kingdom are known pasters, so I wouldn’t recommend buying from them. There are a lot of “ok” developers you can ask about building a workaround for your motherboard, which is what I’d try first.

[Havocaveli]

Ive asked TrustedLabs they cant do it. Im gonna ask CyberAmmo next any other you would recommend? Im also curious are all B550 affected? i got a MSI B550M PRO-VDH WIFI