[TUT] Vacking w/o loosing mobs + mobs speed hack [WINHEX]

[LBO]

People who flame people on this forum are failures. Don't join the ******* forum if you don't like the fact that people find ways to hack.

[karimelkholy]

if i use this speed hack, will it just enhance my charecters movment speed runing wise, or will it make my skills faster as well?

[~Twister~]

Originally Posted by karimelkholy

if i use this speed hack, will it just enhance my charecters movment speed runing wise, or will it make my skills faster as well?

it will just incrase your char. movement speed. It won't affect anything esle.

[karimelkholy]

is there a section where i can find out skill hack . would you happen to know?

[jessetoland]

Ok i have my datapk all good auto pots/speed/wall/vac~Im very carefull with my vac. 115 lvls dont come easy since i just started using this at lvl 114.

my question is i have all my selected mobs to vac i only do some so i dont look as if im vaccing the whole room/ i use one type of seetooth hunter and beserker the others i leave alone so they act as if normal

1. i gather mobs and i have refered to all the tuts, but i still have a prob with keeping the mobs when i stop 50% of them stay but the rest run into the wall or just dissapeap lol. any values that keep them more together i use 300 to keep them close to me and speed at 9, my character speed is 2 so it equals out to the same when they follow, please advise.

1. i always gather mobs off screen to not be spotted 99% of the time, but it seems that in order for me to kill them off i have to bring the mobs that are vacced into a ground area~ room~ or i use a small part of the map were no body is, so i brind all the mobs to a small part on the map. my question is, If there is a way to kill them on the black or blues screen like off the map. Note i have tried but they ALL run away if i do that so i have to bring the mobs to an area on the map to finish them off. i would rather do it off screen to be 100% safe, please advise.


Thanks for reading and if you can help i am in your debt

hoping some one can help me out
still researching my datapk. no luck on a fix for me.


Please dont double post - KikiChan

[dualfrost2]

hey can i use this on expedition?

[wln6672]

Originally Posted by dualfrost2

hey can i use this on expedition?

This thread start after expedition so yeah it's for expedition, and it's always about the same for winhex editing just have to find the offset and data you need to edit. Please learn your hacks by reading the tutorial, all tutorial here are easy to understand.

[fireempire]

Originally Posted by jessetoland

Ok i have my datapk all good auto pots/speed/wall/vac~Im very carefull with my vac. 115 lvls dont come easy since i just started using this at lvl 114.

my question is i have all my selected mobs to vac i only do some so i dont look as if im vaccing the whole room/ i use one type of seetooth hunter and beserker the others i leave alone so they act as if normal

1. i gather mobs and i have refered to all the tuts, but i still have a prob with keeping the mobs when i stop 50% of them stay but the rest run into the wall or just dissapeap lol. any values that keep them more together i use 300 to keep them close to me and speed at 9, my character speed is 2 so it equals out to the same when they follow, please advise.

1. i always gather mobs off screen to not be spotted 99% of the time, but it seems that in order for me to kill them off i have to bring the mobs that are vacced into a ground area~ room~ or i use a small part of the map were no body is, so i brind all the mobs to a small part on the map. my question is, If there is a way to kill them on the black or blues screen like off the map. Note i have tried but they ALL run away if i do that so i have to bring the mobs to an area on the map to finish them off. i would rather do it off screen to be 100% safe, please advise.


Thanks for reading and if you can help i am in your debt

hoping some one can help me out
still researching my datapk. no luck on a fix for me.


Please dont double post - KikiChan

just go to the coordinate x:0 y:0 and ull be able to kill ur mob if u hav the wall hack but, be sure u dont switch map when ur to 0,0 . Exemple , in den of norak 2 , when ur at 0,0 with ur char , u will be teleported to draco.






I ve all the auto pot, speed, wall to work but there is some mob im not able to make them vacc like the algol ghost, alderamin ghost, and soul lasputin sorcerer. could some1 just write me the edited line of 1 of them and ill be ok to make the other.

[Bigbossman08]

Is there a Tut on where to start? I have Win Hax, i just need to know how to find the files I need. Also awesome work Mr_Twistеr. If theirs no tut ill just make one as soon as I learn. Thanks

[fireempire]

Originally Posted by Bigbossman08

Is there a Tut on where to start? I have Win Hax, i just need to know how to find the files I need. Also awesome work Mr_Twistеr. If theirs no tut ill just make one as soon as I learn. Thanks

just read the first page...

[0522894546]

nice tutorial,its almost the easiest one ive seen till now

[b14ckrose]

I was making a pack with run speeds on all maps (with no vac) just so I could get to places faster but for some reason, Avalon does not show an Avalon.pre

Is there something wrong with my pack.d04? Or is there supposed to be no .pre for Avalon?

[~Twister~]

that's what i got in avalon...I don't have speed hack on it...that how it looks clean.

18,Avalon Island,avalon.map,avalon.mol,Avalon.mel,Avalon.mac ,Map\18_Avalon\NPC_18_Avalon.csv,2,18,1.7,-70,80,12,50,50,-2.2,0,90,light_requies.txt,water/skyCube_dri=.dds,75,,60,17,10,15,0,20,10,0,0,0,0,3 ,60000,0,1,1,0,1,0,1,0,0,0,1,..\Share\Map\18_Avalo n\m018.mal,..\Share\Map\18_Avalon\MON_18_Avalon.cs v,..\Share\Map\18_Avalon\NPC_18_Avalon.csv,,0,0,0, 0,0,0,0,0,0,100,Map18_Avalon,0,0,0,,85,180,0,0,0,0 ,0,0,100,100,0,0,1,1,1,0,200,PC\LevelCap\Default.c sv,0.65,1

[b14ckrose]

Originally Posted by Mr_Twistеr

that's what i got in avalon...I don't have speed hack on it...that how it looks clean.

18,Avalon Island,avalon.map,avalon.mol,Avalon.mel,Avalon.mac ,Map\18_Avalon\NPC_18_Avalon.csv,2,18,1.7,-70,80,12,50,50,-2.2,0,90,light_requies.txt,water/skyCube_dri=.dds,75,,60,17,10,15,0,20,10,0,0,0,0,3 ,60000,0,1,1,0,1,0,1,0,0,0,1,..\Share\Map\18_Avalo n\m018.mal,..\Share\Map\18_Avalon\MON_18_Avalon.cs v,..\Share\Map\18_Avalon\NPC_18_Avalon.csv,,0,0,0, 0,0,0,0,0,0,100,Map18_Avalon,0,0,0,,85,180,0,0,0,0 ,0,0,100,100,0,0,1,1,1,0,200,PC\LevelCap\Default.c sv,0.65,1

Looks like that for me too.

I wonder what we're supposed to do for that.

[jessetoland]

hey guys i am looking for a value, well i know were and how to edit my pak.
i recently tried to change the speed for the map Aqua and when i put it to speed 2, LOL i was in slow motion the speed is different from all other maps and i cant grind anywere else atm all maps~mobs are green to me. i am tryin to learn about those mobs and Aqua speed/character speed at that specific map. i am a very very carefull vaccer and note: i only vac 2 mob types not all mobs. Please advise




thanks jtt