[Release] VAC/Non-Aggro for Ranged/Magic Mobs [Tutorial]
Discussion on [Release] VAC/Non-Aggro for Ranged/Magic Mobs [Tutorial] within the Dekaron Exploits, Hacks, Bots, Tools & Macros forum part of the Dekaron category.
[Release] VAC/Idle For All Mob Types [Tutorial][Expedition]
This is for 2moons Expedition !
This tutorial is outdated and i have no intentions to update this. Look at the Crespo A,B,C VAC tutorial, it works for any mob and is up to date but the offsets might have changed.
Edit: The new information added makes this working for ALL mobs.
I'm making this tutorial because there isn't any tutorial posted how to VAC
Ranged/Magic mobs or mobs with different AI Key than 1.
Launcher Bypass is recommended:
Note! The " signs are not needed.
Picture taken on Windows Vista: Home Basic.
Credits of the bypass to mithandir1!
_________________
So before you can edit anything you have to install WinHex. Note! You cant download the full version! You have to register the editor with the notes below:
In this case the following colors mean:
Red = This is the AI Key.
Green = These values are the Elemental Resistance Values.
Blue = This is the Cellrange for Ranged/Magic mobs.
Magenta = Some Value shown in the other tutorials (don't care about this one).
Basically you can replace any 0 Value with the original Cellrange Value. However different edits in the pack make different effects. But keep in mind that you may NOT change the filesize, not even a single byte!
Quote:
Offsets:
Monster Section in the pack.d04: 283673876 (DEC) - 10E88514 (HEX) Info Section in the pack.d04: 283391936 (DEC) - 10E437C0 (HEX)
VAC:
I can start by saying this. It's not even nearly as simple as changing the red and the magenta Value.
The Ranged/Magic mobs follow you if you change the Cellrange (blue) to the Value 0. But then you got a 14 you should Replace at a Parameter.
This is the reason i've lighted some Values in green. Those are Resistance Values.
So you change a Resistance Value to the original Cellrange Value. Note the easiest way to do this is ensuring that the Resistance Value is 0 originally. So you change the Cellrange Value to one Resistance Value and the original Resistance Value, which is a 0, to Cellrange Value.
Then the sample line will look like this:
So generally you can change any UNIMPORTANT "0" Value to the original Cellrange Value, which is often a 14.
So hope you understood that it isn't as easy as VACing melee mobs.
Idle: (Note! This means that the mob doesn't do ANYTHING, not even ATTACK) !
Making the mobs Idle is a bit easier than making them VAC.
You will need to change the AI Key (red-first quote) to the Value 7. That sounds easy right. But then you got to find a Value of 7 somewhere that you would change to the original AI Key Value.
Note! This works for ALL Mobs, not just the Ranged ones.
The AI Key is the Parameter which commands the mob to attack in a way depending on the Value set for the Parameter. Below is a sample line showing the AI Key (red):
1 = Plain Aggro --> The mob will attack you when you enter its line-of-sight. 2 = Alternatively Aggro --> The mob will attack you if you attack it. 3 = Ranged Attack --> The mob will attack you with ranged attacks when you enter its line-of-sight. 4 = Special Skills --> The mob will attack you with different attacks when you enter its line-of-sight. 5 = Special Skills --> The mob will attack you with different attacks when you enter its line-of-sight. 6 = Ranged Attack --> The mob will attack you with ranged attacks when you enter its line-of-sight. 7 = Idle --> The mob wont attack you even if you attack it.
Now when you locate the AI Key you want perhaps to know what you should change the Value to. If the Value is 1,2,4 or 5 you must change it to 3 or 6. But if the Value is 3 or 6 you must change the cellrange to 0, as described in the middle of the post.
________________
WinHex Easy-Editing Method:
If you want to know how to edit the (for example) 0 to 14 and 14 to 0 easier read this.
If you want to change a 0 to 14 you need an extra byte. Click on the 0 with the mouse and press Insert on your keyboard. It will ask how many zero bytes you want to add. In this case make it 1. Then you will have a . beside the 0 and now you will find out that it is easy to change the .0 to 14. Then the 14 to 0 is done by highlighting ONE of the digits in 14 with the mouse. Then press Delete on the keyboard. If you did it right you will have the exact same bytesize in the packfile. Note! If you are very unsure with your capability to change this it's recommended to backup the packfile to prevent any Corrupted Packfiles.
_______________________________________
Hope you understand what i tried to show you.
Post Any Questions of things that remain unclear in this topic, i'll answer.
P.S Those who want to make an Easy Version of my tutorial please DON'T. There isn't that much to make easier in this for making a new topic. It's although the same information right .
And those who think "Oh f*ck, new topic about VAC" should look again at the info and figure out if this has anything to do with the previous tutorials. Thanks.
ok i got what you mean. now that's a problem. yes the monster now non aggro but it dun follow as well. i did everything u told, i guess tat's no different between dead eye and Penril Hunter right?
when u repalce the 14 without adding xtra space , wut should i do with the 0 or , that been replaced?
wut i try to explain its only a 0 between ",0," how i do if i wanna replace 14 when its gonna take 2 space? coz i dunno wut number its not important that can be taking off
1502,Penril Hunter,0,27,31,4994,0,154,221,15,70,1,6,0,0,0,0,0, 014,40,0,0,0,1.8,3.2,1,1,fenrilhunter,ÀÛ¼ºÁß,0,0,0 ,366,74,10 1,35000,6,1,2,104,70,50,50,2,18,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,205,294,1 3,31,14,3900,3000001,
thx for ur help
Because any of the Elemental Resistance Values aren't 0 we got to change something else .
Quote:
Originally Posted by abelwang
ok i got what you mean. now that's a problem. yes the monster now non aggro but it dun follow as well. i did everything u told, i guess tat's no different between dead eye and Penril Hunter right?
If you made the VAC part right, then it should follow. But if you made it like the Non-Aggro part it is meant that the mobs does NOT do ANYTHING
Quote:
Originally Posted by hu6291
when u repalce the 14 without adding xtra space , wut should i do with the 0 or , that been replaced?
wut i try to explain its only a 0 between ",0," how i do if i wanna replace 14 when its gonna take 2 space? coz i dunno wut number its not important that can be taking off
1502,Penril Hunter,0,27,31,4994,0,154,221,15,70,1,6,0,0,0,0,0, 014,40,0,0,0,1.8,3.2,1,1,fenrilhunter,ÀÛ¼ºÁß,0,0,0 ,366,74,10 1,35000,6,1,2,104,70,50,50,2,18,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,205,294,1 3,31,14,3900,3000001,
thx for ur help
You can delete 1 block from the 14 with delete and then you can add one block to the 0 part by pressing Insert key .
Quote:
Originally Posted by croswaity
invalid client, for me...
You will face invalid client sometimes as with all VACs and Non-Aggros but i am sure that you will get in if you try intensively and have edited all correct .
Im going to start off by saying thanks for the tut and that it is alot of help. But I have a problem when im dealing with monsters with more parameters (i think thats the right word) then the penil hunter example u used.
For example
2282,Bellita,2,19,103,48193,0,658,940,10,70,1,6,0, 0,0,0,0,5,55,5,5,5,0,2.5,5,1,1,belita,ÀÛ¼ºÁß,0,0,0 ,9148,678,915,30100,3,1,1,86,86,76,76,3,18,4,1709, 2073,42,98,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,19,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,1500,1819,42,98,14,3600,30 00001,224,0,0,0,0,0,0,6,1819,2205,42,98,14,3600,30 00001,225,0,0,0,0,0,0,6,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,6,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,6,0,0,0,0,0,0,0,0,0,0,0,0,0,0,464,10,5 15,22,41,189,41,189,42,158,43,95,115,168,116,168,1 16,140,116,84,507,20,408,40,736,25,1012,70,314,4,0 ,0,0,0,0,0,0
has more "parameters" then the Penil so which would i switch on it?
You get the maze mobs and edit them...
This isn't a tutorial about hacking maze, it's by getting ranged/magic mobs VAC or not doing anything.
Quote:
Originally Posted by Mychal89
Im going to start off by saying thanks for the tut and that it is alot of help. But I have a problem when im dealing with monsters with more parameters (i think thats the right word) then the penil hunter example u used.
For example
2282,Bellita,2,19,103,48193,0,658,940,10,70,1,6,0, 0,0,0,0,5,55,5,5,5,0,2.5,5,1,1,belita,ÀÛ¼ºÁß,0,0,0 ,9148,678,915,30100,3,1,1,86,86,76,76,3,18,4,1709, 2073,42,98,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,19,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,1500,1819,42,98,14,3600,30 00001,
has more "parameters" then the Penil so which would i switch on it?
Non-aggro mobs [Elyos] 10/15/2009 - Aion - 4 Replies Hey guys,
maybe someone could tell me where to find some non-aggro on lvl 31-34.
My szbot works fine, but my sorc just keeps on pulling two mobs and dies some times. Would be great if someone could tell me a spot :]
greets
Non-aggro mobs [Elyos] 10/14/2009 - Aion - 0 Replies Hey guys,
maybe someone could tell me where to find some non-aggro on lvl 31-34.
My szbot works fine, but my sorc just keeps on pulling two mobs and dies some times. Would be great if someone could tell me a spot :]
greets
60 dng Ranged mobs attack me 11/28/2008 - Dekaron - 2 Replies Hi,
in 60 dng Ranged mobs attack me,why?
I test AIKey 3,6,4,5 and the cell_Range is 0
But on 3,6 they attack me with 4,5 the ignore me:confused::confused:
What i forgot to change?
MfG EmEx
Need Help Ranged Mobs 10/25/2008 - Dekaron - 13 Replies I need help with ranged mobs for example one i've been working on
1502,Penril Hunter,0,27,31,4994,0,154,221,15,70,1,6,0,0,0,0,0, 0,14,40,0,0,0,1.8,3.2,1,1,fenrilhunter,ÀÛ¼ºÁß,0,0, 0 ,366,64,101,35000,7,1,2,104,70,50,50,2,18,0,0,0,0, 0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,205,2 94,13,31,0,3900,3000001,
All my mob does is stand still does not follow if i attack it , it will not attack me.
Help please! I'll give...
![[Release] VAC/Non-Aggro for Ranged/Magic Mobs [Tutorial]](https://www.elitepvpers.com/forum/iconimages/dekaron-exploits-hacks-bots-tools-macros/release-vac-non-aggro-ranged-magic-mobs-tutorial_ltr.gif){kind=small}
[Release] VAC/Idle For All Mob Types [Tutorial][Expedition]
. 
