Cracking SV

masterjoc · 06/16/2007, 08:19

Quote:

Originally posted by malamen@Jun 16 2007, 02:30
Wow thx anatasia nice job!

patch 4351 with CE script for 1.15 working wonderfully Thanks ^^!!!!

dude...can u give me the link of anastasia's guide for sv1.15 ?
i cant find the page... and the link
i cant find the files too

tikus · 06/16/2007, 08:24

As per request, is in pg 68, here the link:

Below is the sv 1.15 file, the link:

masterjoc · 06/16/2007, 08:35

Quote:

Originally posted by anantasia@Jun 10 2007, 06:16
Update script for SV 1.15 (Still testing period)

Quote:

[ENABLE]
//code from here to '[DISABLE]' will be used to enable the cheat

alloc(newmem,2048) //2kb should be enough

label(exit)
label(returnhere)

4230AA:
jmp newmem
returnhere:

newmem: //this is allocated memory, you have read,write,execute access
//place your code here
cmp [10044004],ff
je exit
mov [10044000],00
pushad
pushfd
push 00000000
push 10000000
push 10003FD0
push 02
call SetWindowsHookExA
mov [10044004],ff
popfd
popad
exit:
mov ecx,[ebp-0c]
pop edi
pop esi
jmp returnhere

UnhookWindowsHookEx:
ret 0004

[DISABLE]
//code from here till the end of the code will be used to disable the cheat
4230AA:
mov ecx,[ebp-0c]
pop edi
pop esi

10044000:
nop

UnhookWindowsHookEx:
ret 0004

is this the guide for CE?

i cant understand it...wat should i do to this?
i cant understand the instruction or something... help me pls

masterjoc · 06/16/2007, 10:39

wat is SV loader? whats that for?

clinton_young · 06/16/2007, 13:35

if SV is made in USA, will it be illeagal to crack it? or the cracker will be sent to court.

just suggesting, no hostility.

Mido73 · 06/16/2007, 13:53

Quote:

Originally posted by anantasia@Jun 10 2007, 06:16
Update script for SV 1.15 (Still testing period)

Quote:

[ENABLE]
//code from here to '[DISABLE]' will be used to enable the cheat

alloc(newmem,2048) //2kb should be enough

label(exit)
label(returnhere)

4230AA:
jmp newmem
returnhere:

newmem: //this is allocated memory, you have read,write,execute access
//place your code here
cmp [10044004],ff
je exit
mov [10044000],00
pushad
pushfd
push 00000000
push 10000000
push 10003FD0
push 02
call SetWindowsHookExA
mov [10044004],ff
popfd
popad
exit:
mov ecx,[ebp-0c]
pop edi
pop esi
jmp returnhere

UnhookWindowsHookEx:
ret 0004

[DISABLE]
//code from here till the end of the code will be used to disable the cheat
4230AA:
mov ecx,[ebp-0c]
pop edi
pop esi

10044000:
nop

UnhookWindowsHookEx:
ret 0004

i wanna take this chance to thank u so much for ur post u r so helpfull and so kind i sure will +k u but when i can do that.
i don't no if i did it right but i loaded th old (SV 1.08-1.10.CT) and i tried to change the script to that u post and when i press ok it tell there is problem in line 24 (call SetWindowsHookExA) i think there is something wrong in the script .
i am waiting for ur answer if i am did well till this step and if it really has problem or what ??
i wanna ty u again anantasia .

prog4mer · 06/16/2007, 14:21

Quote:

Originally posted by anantasia@Jun 10 2007, 06:16
Update script for SV 1.15 (Still testing period)

Quote:

[ENABLE]
//code from here to '[DISABLE]' will be used to enable the cheat

alloc(newmem,2048) //2kb should be enough

label(exit)
label(returnhere)

4230AA:
jmp newmem
returnhere:

newmem: //this is allocated memory, you have read,write,execute access
//place your code here
cmp [10044004],ff
je exit
mov [10044000],00
pushad
pushfd
push 00000000
push 10000000
push 10003FD0
push 02
call SetWindowsHookExA
mov [10044004],ff
popfd
popad
exit:
mov ecx,[ebp-0c]
pop edi
pop esi
jmp returnhere

UnhookWindowsHookEx:
ret 0004

[DISABLE]
//code from here till the end of the code will be used to disable the cheat
4230AA:
mov ecx,[ebp-0c]
pop edi
pop esi

10044000:
nop

UnhookWindowsHookEx:
ret 0004

@ana does it work correctly ?

who tried this succesful ? i try it today.

masterjoc · 06/16/2007, 14:37

Quote:

Originally posted by Mido73+Jun 16 2007, 13:53--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Mido73 @ Jun 16 2007, 13:53)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin--anantasia@Jun 10 2007, 06:16
Update script for SV 1.15 (Still testing period)

Quote:

[ENABLE]
//code from here to '[DISABLE]' will be used to enable the cheat

alloc(newmem,2048) //2kb should be enough

label(exit)
label(returnhere)

4230AA:
jmp newmem
returnhere:

newmem: //this is allocated memory, you have read,write,execute access
//place your code here
cmp [10044004],ff
je exit
mov [10044000],00
pushad
pushfd
push 00000000
push 10000000
push 10003FD0
push 02
call SetWindowsHookExA
mov [10044004],ff
popfd
popad
exit:
mov ecx,[ebp-0c]
pop edi
pop esi
jmp returnhere

UnhookWindowsHookEx:
ret 0004

[DISABLE]
//code from here till the end of the code will be used to disable the cheat
4230AA:
mov ecx,[ebp-0c]
pop edi
pop esi

10044000:
nop

UnhookWindowsHookEx:
ret 0004

i wanna take this chance to thank u so much for ur post u r so helpfull and so kind i sure will +k u but when i can do that.
i don't no if i did it right but i loaded th old (SV 1.08-1.10.CT) and i tried to change the script to that u post and when i press ok it tell there is problem in line 24 (call SetWindowsHookExA) i think there is something wrong in the script .
i am waiting for ur answer if i am did well till this step and if it really has problem or what ??
i wanna ty u again anantasia . [/b][/quote]
damn, i cant really understand anastasia's guide ...
what does this guide for?
what files do i need before i perform this guide..
where can i get those files
then...what does it means...?
i cant understand it...or if there's any instruction, i cant see it / i cant find it
what should i do first? :?

Mido73 · 06/16/2007, 16:24

that script that anastasia post is for the cheat table file (*.CT) that we put on the cheat engine to freaze the SV and make it don't confirme the id and the pass

that we don't have.
anastasia make a so eazy guild for use that trick.
i think u will understand now

bebe · 06/16/2007, 18:15

I did it and was working great, but after some time i experienced some slow down, and i decided to re-open it. After that it stopped working, i even tried to restart my pc, and the problem is still the same. Any help would be apreciated.

And thanks again Anantasia for ur hard work.

YvanEhtNioj · 06/16/2007, 18:32

@masterjoc that is just the script u find in ur cheat engine table just like when u made ur own for v 1.10 you had to put that code unless u just downloaded the script from some post..

here is the scan for the sv loader,
Scan taken on 16 Jun 2007 16:27:55 (GMT)
A-Squared
Found nothing
AntiVir
Found nothing
ArcaVir
Found nothing
Avast
Found nothing
AVG Antivirus
Found nothing
BitDefender
Found nothing
ClamAV
Found nothing
Dr.Web
Found nothing
F-Prot Antivirus
Found nothing
F-Secure Anti-Virus
Found nothing
Fortinet
Found nothing
Kaspersky Anti-Virus
Found nothing
NOD32
Found nothing
Norman Virus Control
Found nothing
Panda Antivirus
Found nothing
Rising Antivirus
Found nothing
VirusBuster
Found nothing
VBA32
Found nothing

clinton_young · 06/16/2007, 20:51

nice job, it works nicely. it became much easier than before, i remembered long time ago we had to change the code and changed to nothing...now all we have to do is to paste down and run it. hah, thx alot cracker

hemp · 06/17/2007, 03:42

Quote:

Originally posted by masterjoc+Jun 16 2007, 14:37--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (masterjoc @ Jun 16 2007, 14:37)</td></tr><tr><td id='QUOTE'>

Quote:

Originally posted by -Mido73@Jun 16 2007, 13:53
<!--QuoteBegin--anantasia

Quote:

@Jun 10 2007, 06:16
Update script for SV 1.15 (Still testing period)

Quote:

[ENABLE]
//code from here to '[DISABLE]' will be used to enable the cheat

alloc(newmem,2048) //2kb should be enough

label(exit)
label(returnhere)

4230AA:
jmp newmem
returnhere:

newmem: //this is allocated memory, you have read,write,execute access
//place your code here
cmp [10044004],ff
je exit
mov [10044000],00
pushad
pushfd
push 00000000
push 10000000
push 10003FD0
push 02
call SetWindowsHookExA
mov [10044004],ff
popfd
popad
exit:
mov ecx,[ebp-0c]
pop edi
pop esi
jmp returnhere

UnhookWindowsHookEx:
ret 0004

[DISABLE]
//code from here till the end of the code will be used to disable the cheat
4230AA:
mov ecx,[ebp-0c]
pop edi
pop esi

10044000:
nop

UnhookWindowsHookEx:
ret 0004

i wanna take this chance to thank u so much for ur post u r so helpfull and so kind i sure will +k u but when i can do that.
i don't no if i did it right but i loaded th old (SV 1.08-1.10.CT) and i tried to change the script to that u post and when i press ok it tell there is problem in line 24 (call SetWindowsHookExA) i think there is something wrong in the script .
i am waiting for ur answer if i am did well till this step and if it really has problem or what ??
i wanna ty u again anantasia .

damn, i cant really understand anastasia's guide ...
what does this guide for?
what files do i need before i perform this guide..
where can i get those files
then...what does it means...?
i cant understand it...or if there's any instruction, i cant see it / i cant find it
what should i do first? :? [/b][/quote]
very simple open cheat engine
then open script vessel
go back to cheat engine click on the little computer in the top right hand corner
select script vessel from the options
go to memory view
press ctrl + a
copy and paste all the codeing here
click on write code
click yes
click on file and click on assign to current cheat table
then go back and click on auto assemble cheat so there is a checkmark in the box
and now it should work

cant explain any simplair then that hope you can do it

freedomnoob · 06/17/2007, 05:07

hemp
tyvm!!
it finally worked here, i was trying whole day, 1.10, 1.15 , all of them
thx

Mido73 · 06/17/2007, 07:15

Quote:

Originally posted by hemp+Jun 17 2007, 03:42--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (hemp @ Jun 17 2007, 03:42)</td></tr><tr><td id='QUOTE'>

Quote:

Originally posted by -masterjoc@Jun 16 2007, 14:37

Quote:

Originally posted by -Mido73@Jun 16 2007, 13:53
<!--QuoteBegin--anantasia

Quote:

Quote:

@Jun 10 2007, 06:16
Update script for SV 1.15 (Still testing period)

i wanna take this chance to thank u so much for ur post u r so helpfull and so kind i sure will +k u but when i can do that.
i don't no if i did it right but i loaded th old (SV 1.08-1.10.CT) and i tried to change the script to that u post and when i press ok it tell there is problem in line 24 (call SetWindowsHookExA) i think there is something wrong in the script .
i am waiting for ur answer if i am did well till this step and if it really has problem or what ??
i wanna ty u again anantasia .

damn, i cant really understand anastasia's guide ...
what does this guide for?
what files do i need before i perform this guide..
where can i get those files
then...what does it means...?
i cant understand it...or if there's any instruction, i cant see it / i cant find it
what should i do first? :?

very simple open cheat engine
then open script vessel
go back to cheat engine click on the little computer in the top right hand corner
select script vessel from the options
go to memory view
press ctrl + a
copy and paste all the codeing here
click on write code
click yes
click on file and click on assign to current cheat table
then go back and click on auto assemble cheat so there is a checkmark in the box
and now it should work

cant explain any simplair then that hope you can do it [/b][/quote]
hi i really think ur explain is so simple but i got a little problem and i need help plz from anyone.
1- i opend SV 1.15
2- cheat engine and i loaded Sv from the processor that works that's ok
3- i pressed memory view and then CTRL+A then i paste the script then file assign current cheat table.
then i saved it as like SV 1.15.CT
4- i made the crack with the hex edite like in 1.10 anansia guide.
---> the problem i can't find that hex 0f 85 92 00 00 00 i only find that 0f 84 92 00 00 00 allready
i tried to freaze it as it and didn't work i made it 84 and din't work i wanna know what i miss.