X-address: 0x69041C
Update:
Ok now, TQ has patched like everything, so i made a new version in order to continue make it work.
however, from now on, u guys will have to use CheatEngine to find the X-address
(if the address changes, please kindly post the new address here, so i can put it at the top)
Cheatengine finding X-address:
1. open CO and CE
2. in CE hook to CO then choose "Unknown initial value" for the Scan type, press First Scan
3. after scanning, in CO, move ur character to the right
4. in CE, choose "Increased value" for Scan type
5. repeat 3,4 couple of times, then move ur chacter to the left in CO
6. in CE, choose "Decreased value" for Scan type
7. repeat for few times
8. the correct address should be appear in the top 1-3 on the list
9. pick the one that doesnt start with 00 for the value
10. get that value and paste it in COELSE, and remember to confirm edit, then test if it works
Functions:
* 2 steps pixel search to detect red health bar
* 4 attack modes to select from
* Auto disconnect when low HP
* Auto pot when low HP
* Disconnect timer
* Save and load recorded path points
* Pick up pink items
Instructions:
1. Open Conquer -1024x768
2. Make sure "show name" is on
3. Open COELSE and set your settings
4. Press OK to start
5. If incorrect, go to Setting>Advance>MapName>Check
6. If correct, the program will ask u to set path points
7. After u set certain path points, press Cancel in order to start.
(Please also check the video examples for better understanding)
HotKeys:
* Ctrl + Q to Pause
* Ctrl + R to Reload
Problems and Solutions:
if it is related to can not open the program:
* Thank you for reading the instructions, the password to extract the zip is: coelse
* You need to have unzip programs like winRAR or winZip to open it.
* For virus scanner users, delete/disable your virus scanner or install Autohotkey and run the script. because your scanner has probably delete some parts of the program.
If it is related to wrong address name:
* Client name must be [Conquer2.0] and process name must be conquer.exe
* Edited, different version of clients or using hack programs can lead to shift of memory address. One must go to the "Advance" setting to update the MapName memory address and check "confirm edit"
If it is related to functions not properly working:
* Vista or above users need to right click and use as administrative mode or disable the UAC.
* Running around but not attacking monsters can be caused by either you haven't turn on "show name" in client or the "Health" color is wrong. Go to "Advance" setting to update.
* Program attack few times and jump to next path point, it might be related to the anti-stuck value too low. Try a higher value.
Screenshot/Video:
Possible password to decompress the archive
This program can works better if u disable the guards health bar
Download:
(made by AutoHotKey language, script included)
