Need help with DMA fuser. Fuser keeps forcing 2nd PC to 60hz!

[Eford9553]

Okay so I'm setting up DMA and have been stuck on this issue. I'm using one monitor, I've set both PCs resolution/frame rate to 1440/144hz but when I turn on both PCs and the fuser, it forces the 2nd PC to 60hz? The 2nd PC works fine on 144hz without the fuser but with the fuser it keeps reverting back to 60hz. Weird part is the fuser overlay works fine with main PC on 1440/144hz and 2nd PC 1440/60hz but as soon as I try to change the 2nd PC back to 144hz the screen goes black! I've already tried swapping all my HDMI cables so I know it can't be a faulty HDMI.

Heres all the parts:
Revl stark 35t DMA card
Dichen Mini Fuser
Kamrui GK3 Mini PC

[Fighters87]

I think you need edid

[Eford9553]

The Dichen Mini Fuser auto adjusts EDID

[Fighters87]

Not all of them. You should do it.

[Eford9553]

How do I do that? The mini fuser only has K1 and K2 button

[darkfibr3]

Originally Posted by Eford9553

How do I do that? The mini fuser only has K1 and K2 button

Eeeehhh... Honestly bro a ditchen v6 clone box is pretty cheap. I'd toss that thing and at least get a better chinisum box.

[M364z01D]

I had the exact same problem. While I was getting 144Hz on my gaming PC with a 2K screen resolution and a single monitor, my radar PC was only supporting up to 60Hz. This was because I plugged the HDMI cable into the motherboard of the second PC. Then I bought a cheap second-hand GTX 1050 Ti graphics card and connected the HDMI cable directly to it. My problem was solved for good.

[Cadyss]

Originally Posted by Eford9553

The Dichen Mini Fuser auto adjusts EDID

Wrong. You need to manual edid inject another monitor bin file until it works.