DMA Card Error while trying to flash

[Gorillag]

Hi so trying to do the last piece of setup on my DMA kit. Card Installed recognised drivers installed, speed test done reading excellent 8900 per speed test.

Problem happens when I try to flash the firmware onto the card.

I get the following error

error wrong # args: should be "jtagspi_init chain_id proxy_bit"

searched everywhere and can only find one reference a comment on a YouTube video but no solution.

I have tried placing flash tool on desktop thrn putting .bin into that folder but nothing seems to change

[Dev7]

Originally Posted by Gorillag

Hi so trying to do the last piece of setup on my DMA kit. Card Installed recognised drivers installed, speed test done reading excellent 8900 per speed test.

Problem happens when I try to flash the firmware onto the card.

I get the following error

error wrong # args: should be "jtagspi_init chain_id proxy_bit"

searched everywhere and can only find one reference a comment on a YouTube video but no solution.

I have tried placing flash tool on desktop thrn putting .bin into that folder but nothing seems to change

I sent you a dm.

[Gorillag]

Ok thought it was sorted but now that i have managed to flash it it's created another problem.

I flashed with the ekknod wifi firmware and re ran a speed test using lone DMA test tool. It is not either failing the test or just scraping into acceptable from hitting 6000+ and excellent using the stock firmware it came with?

Any ideas

Original speed test before flashing new firmware

EVICE: FPGA: SP605 / FT601 PCIe gen2 x1 [1,1,1] [v4.13,0600] [ASYNC,NORM]
WARNING: Functionality may be limited. Extended debug information disabled.
Offline symbols unavailable - file 'info.db' not found.
Reason: Could not load PDB required files - symsrv.dll/dbghelp.dll.
Initialized 64-bit Windows 10.0.26100
27/05/2025 15:51:35 [ Infor ] -> ?????
27/05/2025 15:51:36 [ Infor ] -> 2856
27/05/2025 15:51:37 [ Infor ] -> 6701
27/05/2025 15:51:38 [ Infor ] -> 6700
27/05/2025 15:51:39 [ Infor ] -> 6701
27/05/2025 15:51:40 [ Infor ] -> 6707
27/05/2025 15:51:41 [ Infor ] -> 6695
27/05/2025 15:51:42 [ Infor ] -> 6721

[i] Vmm Version: 5.8.25.145
[i] Leechcore Version: 2.16.11.62
DEVICE: FPGA: Enigma X1 PCIe gen2 x1 [250,10,500] [v4.13,0600] [ASYNC,NORM,FWCUST]
[SYMBOL] Initialized symbol subsystem (Microsoft).
Initialized 64-bit Windows 10.0.26100
[OK] DMA Initialization
[i] Retrieving Physical Memory Map...
1000 - 9dfff
9f000 - 9ffff
100000 - 63e45fff
63e47000 - 63e9bfff
63e9d000 - 705b0fff
75fff000 - 75ffffff
100000000 - 107f7fffff

[OK] Memory Map
[i] Running Speed Test for 15.00 seconds...
[i] 7560
[i] 7574
[i] 7580
[i] 7570
[i] 7538


However after I flashed the new firmware (Ekknod Wifi Captain DMA) to the device I get the following message


] Vmm Version: 5.8.25.145
[i] Leechcore Version: 2.16.11.62
DEVICE: FPGA: Enigma X1 PCIe gen1 x1 [250,10,500] [v4.13,0600] [ASYNC,NORM,FWCUST]
[SYMBOL] Initialized symbol subsystem (Microsoft).
Initialized 64-bit Windows 10.0.26100
[OK] DMA Initialization
[i] Attempting to locate process smss.exe...
[i] Process smss.exe running @ PID 988
[i] Attempting to enumerate process modules...
[i] smss.exe @ 0x7ff68d220000
[i] ntdll.dll @ 0x7ffdb4600000
[OK] Process Lookup
[i] Retrieving Physical Memory Map...
1000 - 9dfff
9f000 - 9ffff
100000 - 63e45fff
63e47000 - 63e9bfff
63e9d000 - 705b0fff
75fff000 - 75ffffff
100000000 - 107f7fffff

[OK] Memory Map
[i] Running Speed Test for 5.00 seconds...
[i] 3284
[i] 3035
[i] 3191
[i] 2930
[i] 3153
[OK] Speed Test
[i] Running Throughput Test on 150000 pages (this may take a moment)...
[OK] Throughput Test

== Speed Test Results (4kB Reads) ==
Total Read Speed: 3159/sec
Total Reads: 15602
Failed Reads: 9 (0.06%)
Fastest Read: 129 μs
Slowest Read: 4908 μs
Average Read: 316 μs

[i] Test Result: FAIL

== Throughput Test Results (4kB Reads) ==
Total Read Throughput: 85.78 MB/s
Total Pages: 150000
Failed Pages: 146884 (97.92%)

[i] Test Result: FAIL

[i] Overall Test Result: FAIL
[CORE] SHUTDOWN COMPLETED (000001A980404040).
[CORE] TIME: 2025-05-27 21:50:25 UTC.
[CORE] RUNTIME: 6s.

I have ordered a new usb cable just in case but seems odd it was ok when originally shipped firmware was on it. Is there anything else I can flash to run speed tests?

Any other suggestions

Edit :All sorted sourced another version of ekknod wifi and that sorted the speed and throuput now getting 8k and 200 mb/s

[akana555]

how do you fixed the error? i get the same thing!

[Gorillag]

Originally Posted by akana555

how do you fixed the error? i get the same thing!

Used a different firmware could never get eknods to work for me.

Do a search on github for firmware there are a few available all good enough yo play COD with

[Fighters87]

simply change the flash tool if the gui gives error during fw flash

[ShuoZA]

Originally Posted by Gorillag

Hi so trying to do the last piece of setup on my DMA kit. Card Installed recognised drivers installed, speed test done reading excellent 8900 per speed test.

Problem happens when I try to flash the firmware onto the card.

I get the following error

error wrong # args: should be "jtagspi_init chain_id proxy_bit"

searched everywhere and can only find one reference a comment on a YouTube video but no solution.

I have tried placing flash tool on desktop thrn putting .bin into that folder but nothing seems to change

Move the flash tool to radar Pc desktop Wil fix it

[Andrey09]

hey i have the same error.

error wrong # args: should be "jtagspi_init chain_id proxy_bit"

how do you fix it ?

[Itsmeagain223]

Hy wanna ask for help ! I was trying to flash my dma cart 75t and every time flashing it says flash success but when rebooting the card blink green and red stable ! Any help?