Running into an issue where my 2nd monitor is locked at 60hz with the fuser even though its a 165hz monitor so when i overlay with fuser my main monitor looks like ****
Running into an issue where my 2nd monitor is locked at 60hz with the fuser even though its a 165hz monitor so when i overlay with fuser my main monitor looks like ****
On "Radar" pc, make sure you set the refresh rate of the fuser display via display settings on that machine, it will show up as a second monitor. Then make sure you set the mode via the remote that came with your fuser. Also make sure the window on your "Game" pc is set to the correct refresh rate.
On "Radar" pc, make sure you set the refresh rate of the fuser display via display settings on that machine, it will show up as a second monitor. Then make sure you set the mode via the remote that came with your fuser. Also make sure the window on your "Game" pc is set to the correct refresh rate.
I did already i set both pc to 144hz and when i check fuser its locked to 60hz it wont let me change it over 60hz i can only go down from there not up. Someone told me they both have to be the same resolution since my main game monitor is 1440p and my 2nd monitor is 1080p
I did already i set both pc to 144hz and when i check fuser its locked to 60hz it wont let me change it over 60hz i can only go down from there not up. Someone told me they both have to be the same resolution since my main game monitor is 1440p and my 2nd monitor is 1080p
The display resolutions have to match in windows yes, so for example if you are trying to achieve 1440p 144hz, make sure the "display" (fuser window) shown on your Radar pc is set to 1440p 144z. Then do the same on your Game pc.
You need to make sure you are pressing 2k 144hz on your fuser remote, these remotes do not get delivered with batteries, so make sure you put a battery in it.
The display resolutions have to match in windows yes, so for example if you are trying to achieve 1440p 144hz, make sure the "display" (fuser window) shown on your Radar pc is set to 1440p 144z. Then do the same on your Game pc.
You need to make sure you are pressing 2k 144hz on your fuser remote, these remotes do not get delivered with batteries, so make sure you put a battery in it.
My fuser didn't come with a remote its a dichen so when i press k1 i can see the main pc monitor go to 2560x1440 144hz but hdmi 2 is only 1080 60hz. When i try setting resolution in display for fuser it only shows 1080 not 1440p and up to 60hz even if i try forcing it through nivida control panel
Running into an issue where my 2nd monitor is locked at 60hz with the fuser even though its a 165hz monitor so when i overlay with fuser my main monitor looks like ****
Hey bro you have Dichen fuser and I sell this variant: I recommend making sure you got 3 HDMI cables and they all support HDMI 2.0+. Next step would be injecting a edid or cycling through K1 until you get the desired resolution. If you want full compatibility injecting the EDID with DC injector tool is best scenario (after you inject EDID with the USB c don't press K1). Join my discord and create a ticket if you want extra support, we got a few guys on today.
Hey bro you have Dichen fuser and I sell this variant: I recommend making sure you got 3 HDMI cables and they all support HDMI 2.0+. Next step would be injecting a edid or cycling through K1 until you get the desired resolution. If you want full compatibility injecting the EDID with DC injector tool is best scenario (after you inject EDID with the USB c don't press K1). Join my discord and create a ticket if you want extra support, we got a few guys on today.
I appreciate the info i do have 3 hdmi cables that support HDMI 2.0+ and i did do the EDID yesterday the fuser appears with the same name as my main monitor now but still stuck at 1080 60fps on HDMI2. Also am i suppose to duplicate both screen (2nd pc/fuser) or just have them as monitor 1 and 2?
I appreciate the info i do have 3 hdmi cables that support HDMI 2.0+ and i did do the EDID yesterday the fuser appears with the same name as my main monitor now but still stuck at 1080 60fps on HDMI2. Also am i suppose to duplicate both screen (2nd pc/fuser) or just have them as monitor 1 and 2?
Gaming PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)
Radar PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)
"Display Settings" (Windows Settings for each PC)
Please make sure to also check advanced display settings and select the correct hertz and resolution output for the fuser display .
If still stuck on 60hz on both pcs make sure when saving the edid you used a HDMI cable and set hz to max before saving. Make sure 2nd pc --> main monitor can handle above 60HZ too without fuser involved.
Gaming PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)
Radar PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)
"Display Settings" (Windows Settings for each PC)
Please make sure to also check advanced display settings and select the correct hertz and resolution output for the fuser display .
If still stuck on 60hz on both pcs make sure when saving the edid you used a HDMI cable and set hz to max before saving. Make sure 2nd pc --> main monitor can handle above 60HZ too without fuser involved.
See i don't have the fuser option to extend display on gaming pc only on radar pc. When i go to envidia control panel and try setting fuser to 1440p 144hz it kicks me out like if fuser resets and doesnt accept the resolution. Then on windows advanced display options for fuser its only 1080p 60hz i can't go above that at all
Quote:
Originally Posted by Ducks Services
Gaming PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)
Radar PC windows display settings:-
(Recommended)- Extended Display (Make sure "fuser monitor" is set to primary display)
"Display Settings" (Windows Settings for each PC)
Please make sure to also check advanced display settings and select the correct hertz and resolution output for the fuser display .
If still stuck on 60hz on both pcs make sure when saving the edid you used a HDMI cable and set hz to max before saving. Make sure 2nd pc --> main monitor can handle above 60HZ too without fuser involved.
How do i set max hz when doing the EDID? I thought it was just selecting the resolution and thats it
[Release] Sarkolata's Auto Fuser for VSRO 07/31/2020 - SRO PServer Guides & Releases - 212 Replies Hey there :)
I'm releasing the Auto Fuser, will work on vsro 188 based servers. (Did not try others)
It's a new release so it can contain bugs, please do not flame me. Instead, report them and i will fix them.
The idea is simply taken from Fuse-o-mat, but this one is better -
Improvements:
1. Play sound & Bring Silkroad Foreground
2. GUI Improvement
HG Fuser Tool ( Automatic Fuser For ++ ) 11/26/2014 - SRO PServer Guides & Releases - 5 Replies Alot of Players in are using this tool
it calls ( HG Fuser )
What it does :
that does auto "+" function -
( Means u can set tool to make +9 for u and go to sleep )
(*Simply*)
Hi need alchemy fuser 05/28/2014 - Silkroad Online - 2 Replies Hi i need an good alchemy fuser . I want to have in this alchemy tool astral and immortal please if someone can help me let me link of download . Thank you !
