wenn ich BaseAddress + StaticOffset rechne, kommt die richtige Variabel raus. Jedoch hat sie dann 9 Stellen, wie kann das NomandMemory auslesen?
Gibt es vllt einen Umweg?
Example: Base: 13F2C0000
SOff: 023BA810
= 014167A810
; Function: _MemoryPointerWrite ($add, $Handle, $Offset, ...)
; Description: Reads a chain of pointers and writes the data to the destination address.
; Parameter(s): $address - The static memory address you want to start at. It must be in
; hex format (0x00000000).
Meine NomadMemory:
PHP Code:
;=================================================================================================
; Function: _MemoryOpen($iv_Pid[, $iv_DesiredAccess[, $iv_InheritHandle]])
; Description: Opens a process and enables all possible access rights to the process. The
; Process ID of the process is used to specify which process to open. You must
; call this function before calling _MemoryClose(), _MemoryRead(), or _MemoryWrite().
; Parameter(s): $iv_Pid - The Process ID of the program you want to open.
; $iv_DesiredAccess - (optional) Set to 0x1F0FFF by default, which enables all
; possible access rights to the process specified by the
; Process ID.
; $if_InheritHandle - (optional) If this value is TRUE, all processes created by
; this process will inherit the access handle. Set to TRUE
; (1) by default. Set to 0 if you want it to be FALSE.
; Requirement(s): A valid process ID.
; Return Value(s): On Success - Returns an array containing the Dll handle and an open handle to
; the specified process.
; On Failure - Returns 0
; @Error - 0 = No error.
; 1 = Invalid $iv_Pid.
; 2 = Failed to open Kernel32.dll.
; 3 = Failed to open the specified process.
; Author(s): Nomad
; Note(s):
;=================================================================================================
Func _MemoryOpen($iv_Pid, $iv_DesiredAccess = 0x1F0FFF, $if_InheritHandle = 1)
If Not ProcessExists($iv_Pid) Then
SetError(1)
Return 0
EndIf
Local $ah_Handle[2] = [DllOpen('kernel32.dll')]
If @Error Then
SetError(2)
Return 0
EndIf
Local $av_OpenProcess = DllCall($ah_Handle[0], 'int', 'OpenProcess', 'int', $iv_DesiredAccess, 'int', $if_InheritHandle, 'int', $iv_Pid)
If @Error Then
DllClose($ah_Handle[0])
SetError(3)
Return 0
EndIf
$ah_Handle[1] = $av_OpenProcess[0]
Return $ah_Handle
EndFunc
;=================================================================================================
; Function: _MemoryRead($iv_Address, $ah_Handle[, $sv_Type])
; Description: Reads the value located in the memory address specified.
; Parameter(s): $iv_Address - The memory address you want to read from. It must be in hex
; format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $sv_Type - (optional) The "Type" of value you intend to read. This is set to
; 'dword'(32bit(4byte) signed integer) by default. See the help file
; for DllStructCreate for all types.
; An example: If you want to read a word that is 15 characters in
; length, you would use 'char[16]'.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns the value located at the specified address.
; On Failure - Returns 0
; @Error - 0 = No error.
; 1 = Invalid $ah_Handle.
; 2 = $sv_Type was not a string.
; 3 = $sv_Type is an unknown data type.
; 4 = Failed to allocate the memory needed for the DllStructure.
; 5 = Error allocating memory for $sv_Type.
; 6 = Failed to read from the specified process.
; Author(s): Nomad
; Note(s): Values returned are in Decimal format, unless specified as a 'char' type, then
; they are returned in ASCII format. Also note that size ('char[size]') for all
; 'char' types should be 1 greater than the actual size.
;=================================================================================================
Func _MemoryRead($iv_Address, $ah_Handle, $sv_Type = 'dword')
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
Local $v_Buffer = DllStructCreate($sv_Type)
If @Error Then
SetError(@Error + 1)
Return 0
EndIf
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If Not @Error Then
Local $v_Value = DllStructGetData($v_Buffer, 1)
Return $v_Value
Else
SetError(6)
Return 0
EndIf
EndFunc
;=================================================================================================
; Function: _MemoryWrite($iv_Address, $ah_Handle, $v_Data[, $sv_Type])
; Description: Writes data to the specified memory address.
; Parameter(s): $iv_Address - The memory address you want to write to. It must be in hex
; format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $v_Data - The data to be written.
; $sv_Type - (optional) The "Type" of value you intend to write. This is set to
; 'dword'(32bit(4byte) signed integer) by default. See the help file
; for DllStructCreate for all types.
; An example: If you want to write a word that is 15 characters in
; length, you would use 'char[16]'.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns 1
; On Failure - Returns 0
; @Error - 0 = No error.
; 1 = Invalid $ah_Handle.
; 2 = $sv_Type was not a string.
; 3 = $sv_Type is an unknown data type.
; 4 = Failed to allocate the memory needed for the DllStructure.
; 5 = Error allocating memory for $sv_Type.
; 6 = $v_Data is not in the proper format to be used with the "Type"
; selected for $sv_Type, or it is out of range.
; 7 = Failed to write to the specified process.
; Author(s): Nomad
; Note(s): Values sent must be in Decimal format, unless specified as a 'char' type, then
; they must be in ASCII format. Also note that size ('char[size]') for all
; 'char' types should be 1 greater than the actual size.
;=================================================================================================
Func _MemoryWrite($iv_Address, $ah_Handle, $v_Data, $sv_Type = 'dword')
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
Local $v_Buffer = DllStructCreate($sv_Type)
If @Error Then
SetError(@Error + 1)
Return 0
Else
DllStructSetData($v_Buffer, 1, $v_Data)
If @Error Then
SetError(6)
Return 0
EndIf
EndIf
DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If Not @Error Then
Return 1
Else
SetError(7)
Return 0
EndIf
EndFunc
;=================================================================================================
; Function: _MemoryClose($ah_Handle)
; Description: Closes the process handle opened by using _MemoryOpen().
; Parameter(s): $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns 1
; On Failure - Returns 0
; @Error - 0 = No error.
; 1 = Invalid $ah_Handle.
; 2 = Unable to close the process handle.
; Author(s): Nomad
; Note(s):
;=================================================================================================
Func _MemoryClose($ah_Handle)
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
DllCall($ah_Handle[0], 'int', 'CloseHandle', 'int', $ah_Handle[1])
If Not @Error Then
DllClose($ah_Handle[0])
Return 1
Else
DllClose($ah_Handle[0])
SetError(2)
Return 0
EndIf
EndFunc
;=================================================================================================
; Function: _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset[, $sv_Type])
; Description: Reads a chain of pointers and returns an array containing the destination
; address and the data at the address.
; Parameter(s): $iv_Address - The static memory address you want to start at. It must be in
; hex format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $av_Offset - An array of offsets for the pointers. Each pointer must have an
; offset. If there is no offset for a pointer, enter 0 for that
; array dimension.
; $sv_Type - (optional) The "Type" of data you intend to read at the destination
; address. This is set to 'dword'(32bit(4byte) signed integer) by
; default. See the help file for DllStructCreate for all types.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns an array containing the destination address and the value
; located at the address.
; On Failure - Returns 0
; @Error - 0 = No error.
; 1 = $av_Offset is not an array.
; 2 = Invalid $ah_Handle.
; 3 = $sv_Type is not a string.
; 4 = $sv_Type is an unknown data type.
; 5 = Failed to allocate the memory needed for the DllStructure.
; 6 = Error allocating memory for $sv_Type.
; 7 = Failed to read from the specified process.
; Author(s): Nomad
; Note(s): Values returned are in Decimal format, unless a 'char' type is selected.
; Set $av_Offset like this:
; $av_Offset[0] = NULL (not used)
; $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal)
; $av_Offset[2] = Offset for pointer 2
; etc...
; (The number of array dimensions determines the number of pointers)
;=================================================================================================
Func _MemoryPointerRead ($iv_Address, $ah_Handle, $av_Offset, $sv_Type = 'dword')
If IsArray($av_Offset) Then
If IsArray($ah_Handle) Then
Local $iv_PointerCount = UBound($av_Offset) - 1
Else
SetError(2)
Return 0
EndIf
Else
SetError(1)
Return 0
EndIf
Local $iv_Data[2], $i
Local $v_Buffer = DllStructCreate('dword')
For $i = 0 to $iv_PointerCount
If $i = $iv_PointerCount Then
$v_Buffer = DllStructCreate($sv_Type)
If @Error Then
SetError(@Error + 2)
Return 0
EndIf
$iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If @Error Then
SetError(7)
Return 0
EndIf
$iv_Data[1] = DllStructGetData($v_Buffer, 1)
ElseIf $i = 0 Then
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If @Error Then
SetError(7)
Return 0
EndIf
$iv_Data[1] = DllStructGetData($v_Buffer, 1)
Else
$iv_Address = '0x' & hex($iv_Data[1] + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If @Error Then
SetError(7)
Return 0
EndIf
$iv_Data[1] = DllStructGetData($v_Buffer, 1)
EndIf
Next
$iv_Data[0] = $iv_Address
Return $iv_Data
EndFunc
;=================================================================================================
; Function: _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data[, $sv_Type])
; Description: Reads a chain of pointers and writes the data to the destination address.
; Parameter(s): $iv_Address - The static memory address you want to start at. It must be in
; hex format (0x00000000).
; $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $av_Offset - An array of offsets for the pointers. Each pointer must have an
; offset. If there is no offset for a pointer, enter 0 for that
; array dimension.
; $v_Data - The data to be written.
; $sv_Type - (optional) The "Type" of data you intend to write at the destination
; address. This is set to 'dword'(32bit(4byte) signed integer) by
; default. See the help file for DllStructCreate for all types.
; Requirement(s): The $ah_Handle returned from _MemoryOpen.
; Return Value(s): On Success - Returns the destination address.
; On Failure - Returns 0.
; @Error - 0 = No error.
; 1 = $av_Offset is not an array.
; 2 = Invalid $ah_Handle.
; 3 = Failed to read from the specified process.
; 4 = $sv_Type is not a string.
; 5 = $sv_Type is an unknown data type.
; 6 = Failed to allocate the memory needed for the DllStructure.
; 7 = Error allocating memory for $sv_Type.
; 8 = $v_Data is not in the proper format to be used with the
; "Type" selected for $sv_Type, or it is out of range.
; 9 = Failed to write to the specified process.
; Author(s): Nomad
; Note(s): Data written is in Decimal format, unless a 'char' type is selected.
; Set $av_Offset like this:
; $av_Offset[0] = NULL (not used, doesn't matter what's entered)
; $av_Offset[1] = Offset for pointer 1 (all offsets must be in Decimal)
; $av_Offset[2] = Offset for pointer 2
; etc...
; (The number of array dimensions determines the number of pointers)
;=================================================================================================
Func _MemoryPointerWrite ($iv_Address, $ah_Handle, $av_Offset, $v_Data, $sv_Type = 'dword')
If IsArray($av_Offset) Then
If IsArray($ah_Handle) Then
Local $iv_PointerCount = UBound($av_Offset) - 1
Else
SetError(2)
Return 0
EndIf
Else
SetError(1)
Return 0
EndIf
Local $iv_StructData, $i
Local $v_Buffer = DllStructCreate('dword')
For $i = 0 to $iv_PointerCount
If $i = $iv_PointerCount Then
$v_Buffer = DllStructCreate($sv_Type)
If @Error Then
SetError(@Error + 3)
Return 0
EndIf
DllStructSetData($v_Buffer, 1, $v_Data)
If @Error Then
SetError(8)
Return 0
EndIf
$iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'WriteProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If @Error Then
SetError(9)
Return 0
Else
Return $iv_Address
EndIf
ElseIf $i = 0 Then
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If @Error Then
SetError(3)
Return 0
EndIf
$iv_StructData = DllStructGetData($v_Buffer, 1)
Else
$iv_Address = '0x' & hex($iv_StructData + $av_Offset[$i])
DllCall($ah_Handle[0], 'int', 'ReadProcessMemory', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer), 'int', '')
If @Error Then
SetError(3)
Return 0
EndIf
$iv_StructData = DllStructGetData($v_Buffer, 1)
EndIf
Next
EndFunc
;===================================================================================================
; Function........: _MemoryGetBaseAddress($ah_Handle, $iHD)
;
; Description.....: Reads the 'Allocation Base' from the open process.
;
; Parameter(s)....: $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $iHD - Return type:
; |0 = Hex (Default)
; |1 = Dec
;
; Requirement(s)..: A valid process ID.
;
; Return Value(s).: On Success - Returns the 'allocation Base' address and sets @Error to 0.
; On Failure - Returns 0 and sets @Error to:
; |1 = Invalid $ah_Handle.
; |2 = Failed to find correct allocation address.
; |3 = Failed to read from the specified process.
;
; Author(s).......: Nomad. Szhlopp.
; URL.............: http://www.autoitscript.com/forum/index.php?showtopic=78834
; Note(s).........: Go to Www.CheatEngine.org for the latest version of CheatEngine.
;===================================================================================================
;===================================================================================================
; Function........: _MemoryGetBaseAddress($ah_Handle, $iHD)
;
; Description.....: Reads the 'Allocation Base' from the open process.
;
; Parameter(s)....: $ah_Handle - An array containing the Dll handle and the handle of the open
; process as returned by _MemoryOpen().
; $iHD - Return type:
; |0 = Hex (Default)
; |1 = Dec
;
; Requirement(s)..: A valid process ID.
;
; Return Value(s).: On Success - Returns the 'allocation Base' address and sets @Error to 0.
; On Failure - Returns 0 and sets @Error to:
; |1 = Invalid $ah_Handle.
; |2 = Failed to find correct allocation address.
; |3 = Failed to read from the specified process.
;
; Author(s).......: Nomad. Szhlopp.
; URL.............: http://www.autoitscript.com/forum/index.php?showtopic=78834
; Note(s).........: Go to Www.CheatEngine.org for the latest version of CheatEngine.
;===================================================================================================
Func _MemoryGetBaseAddress($ah_Handle, $iHexDec = 0)
Local $iv_Address = 0x00100000
Local $v_Buffer = DllStructCreate('dword;dword;dword;dword;dword;dword;dword')
Local $vData
Local $vType
If Not IsArray($ah_Handle) Then
SetError(1)
Return 0
EndIf
DllCall($ah_Handle[0], 'int', 'VirtualQueryEx', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer))
If Not @Error Then
$vData = Hex(Int(DllStructGetData($v_Buffer, 2)))
$vType = Hex(Int(DllStructGetData($v_Buffer, 3)))
While $vType <> "00000080"
DllCall($ah_Handle[0], 'int', 'VirtualQueryEx', 'int', $ah_Handle[1], 'int', $iv_Address, 'ptr', DllStructGetPtr($v_Buffer), 'int', DllStructGetSize($v_Buffer))
$vData = Hex(Int(DllStructGetData($v_Buffer, 2)))
$vType = Hex(Int(DllStructGetData($v_Buffer, 3)))
If Hex($iv_Address) = "01000000" Then ExitLoop
$iv_Address += 65536
WEnd
If $vType = "00000080" Then
SetError(0)
If $iHexDec = 1 Then
Return Dec($vData)
Else
Return $vData
EndIf
Else
SetError(2)
Return 0
EndIf
Else
SetError(3)
Return 0
EndIf
EndFunc
