AFK Loader

[kong12200]

Originally Posted by ntKid

CLua Update get the last binaries from ->

Overview was removed since CamFun is already doing the same utility and much better, so the CLua depends on you to set zoom out and make it overview before turning macro on( Thx Thr!ce )

-Added CMoveTogglePos( ) ( This will make your caracter always return to the spot where the macro was initiated )( melee class *** ).

-Added CMoveToPos( x, y ) ( This will make your character move to X, Y )

-Added CSleep( x ) ( this will make wait timer in miliseconds 1 second = 1000 ms )( use this with wisdom if its too low the performance will be **** and you will stress your processor )

This was kept simple and not intended to be a final release, me and other devs are working on something better for the future, meanwhile this will do the job for those that have no program to use.

Update your client to last International version before attempt to run this.

hmmm.... it says Updated... but it also says Clua.. so is the CluaSrs the one updated not the LUA bot?

I iz noob sry QQ

*Update.. The botInterface just pop'd out.. im going 2 test it ^_^ thx for updating..

*Update#2.. OMG the Millisecond change help'd a so much >.< now im getting less delay before using skills ^_^ thx u so much.. Im going 2 test the Move to Origin spot when im out of dis dungeon.

[ai91ras]

the bot is not working I cant even see the macro table on the left side., But the cam is working perfectly. Is there something I need to do? or something I missed? I did extract the afkloader on the folder where my aurakingdom is installed., Run it as admin and wait for videos to finish., But still cant get it to work I am using windows 7 32bit,. Pls help TIA

[ntKid]

Originally Posted by ai91ras

the bot is not working I cant even see the macro table on the left side., But the cam is working perfectly. Is there something I need to do? or something I missed? I did extract the afkloader on the folder where my aurakingdom is installed., Run it as admin and wait for videos to finish., But still cant get it to work I am using windows 7 32bit,. Pls help TIA

This is a known problem, do not skip the intro videos.
Run your game in window mode.

Those steps will help the injection to succeed.

Originally Posted by kong12200

*Update#2.. OMG the Millisecond change help'd a so much >.< now im getting less delay before using skills ^_^ thx u so much.. Im going 2 test the Move to Origin spot when im out of dis dungeon.

I think CMoveTogglePos( ) is enough to make your character stick to the spot, unless you want to make a waypoint bot using CMoveToPos( x, y ) but i dont advise it at this point because the character can be stuck in vegetation while moving, these types of issues are some of the things we are working on.

Also CMoveToPos( x, y ) at this moment is not prepared to multiclient on diferent maps, this is why i came up with CMoveTogglePos( )

[thaikill]

Originally Posted by ai91ras

the bot is not working I cant even see the macro table on the left side., But the cam is working perfectly. Is there something I need to do? or something I missed? I did extract the afkloader on the folder where my aurakingdom is installed., Run it as admin and wait for videos to finish., But still cant get it to work I am using windows 7 32bit,. Pls help TIA

Easy solve, you just need to put AK into window mode.

[wrobson]

Very Very Very Thank you ntKid.... It's perfect ... I still do not know how to use the second line of skills.

But it is very good ...

Congratulations for your knowledge and dedication.

[ntKid]

Originally Posted by wrobson

Very Very Very Thank you ntKid.... It's perfect ... I still do not know how to use the second line of skills.

But it is very good ...

Congratulations for your knowledge and dedication.

I forgot about that one -.-' well i will fix on the next version, thx for the feedback.
If i succeed i will also add the requested navea skytower farming bot on the next release

[wrobson]

Wowwwww nice...

[kong12200]

Originally Posted by ntKid

This is a known problem, do not skip the intro videos.
Run your game in window mode.

Those steps will help the injection to succeed.



I think CMoveTogglePos( ) is enough to make your character stick to the spot, unless you want to make a waypoint bot using CMoveToPos( x, y ) but i dont advise it at this point because the character can be stuck in vegetation while moving, these types of issues are some of the things we are working on.

Also CMoveToPos( x, y ) at this moment is not prepared to multiclient on diferent maps, this is why i came up with CMoveTogglePos( )

So dats why.. yes i do use multi client.. but i use it for my fishing and farming account.. 1 with bot 1 without. so it should work fine(i think) xD

and just a request.. is there a way for the bot to measure the distance it currently on so that it wont stray too far from the "CMoveTogglePos( )"

when i was testing it on a spot where there are alot of mobs spawns it works fine.. but lets say im farming for armor fortification scrolls and because of how packed the mobs are.. it attacks some mobs with weapon fortification scrolls instead. and since there is still no way for the bot to go back to town and repair.. it can get in the way in farming as much scrolls as I can ^^. just an idea i would like to see ^_^

[corpus]

excuse my noobnes do i have to edit the cmovetogglepos? cause i starty the macro bot the char keeps moving to 1 side and never returns to spot again sorry for my noobnes XD

[ntKid]

Originally Posted by corpus

excuse my noobnes do i have to edit the cmovetogglepos? cause i starty the macro bot the char keeps moving to 1 side and never returns to spot again sorry for my noobnes XD

The toggle pos is saved every time you turn your macro to On. so it will move to that position after killing a monster unless something interrupts, a new monster shows up or your CSleep is too low and your selectnearest breaks the operation.

You have to set your view angles to overview( like a radar ) so you can create a imaginary radius for your macro to operate. If you just face forward it will target every thing on your field of vision try to make the bounds with your camera.

[kautot090]

Originally Posted by ntKid

CLua Update get the last binaries from ->

Overview was removed since CamFun is already doing the same utility and much better, so the CLua depends on you to set zoom out and make it overview before turning macro on( Thx Thr!ce )

-Added CMoveTogglePos( ) ( This will make your caracter always return to the spot where the macro was initiated )( melee class *** ).

-Added CMoveToPos( x, y ) ( This will make your character move to X, Y )

-Added CSleep( x ) ( this will make wait timer in miliseconds 1 second = 1000 ms )( use this with wisdom if its too low the performance will be **** and you will stress your processor )

This was kept simple and not intended to be a final release, me and other devs are working on something better for the future, meanwhile this will do the job for those that have no program to use.

Update your client to last International version before attempt to run this.

nTkid thank you for all the hard work and dedication we salute you and all the devs involved!!! keep it up thanks and more power!

[tropartz]

is it working on xp?

[kong12200]

simple tip for any new user of dis bot.. try changing the "CSleep( 100 )" on the skill to "300" if your experiencing any crashing on the game.

It should look like dis if its done

--[[ LUA SIMPLE EXAMPLE ]]

IsTarget = CGetPlayerTarget( )

if IsTarget == 0 then
	CMoveTogglePos( )
	CSleep( 100 )
	CSelectNearestTarget( )
        
else
	if CGetPlayerTarget( ) then
		CSendSlotBarSkill( 1 )
		CSleep( 300 )
	end
	if CGetPlayerTarget( ) then
		CSendSlotBarSkill( 2 )
		CSleep( 300 )
	end
	if CGetPlayerTarget( ) then
		CSendSlotBarSkill( 3 )
		CSleep( 300 )
	end
	if CGetPlayerTarget( ) then
		CSendSlotBarSkill( 4 )
		CSleep( 300 )
	end
end

[solid2005]

yeah im crashing too but im use the old one sleep.

[thaikill]

Originally Posted by corpus

excuse my noobnes do i have to edit the cmovetogglepos? cause i starty the macro bot the char keeps moving to 1 side and never returns to spot again sorry for my noobnes XD

It really depend on what class you are, but because you're moving a lot I suspect you are a melee class

I suggest you try this

(this one seems to do the trick for me @ lvl 57)

if IsTarget == 0 then
	CMoveTogglePos( )
	CSleep( 1000 )
	CSelectNearestTarget( )

or if you're such a high lvl "??" that you one hit kill

if IsTarget == 0 then
	CMoveTogglePos( )
	CSleep( 3000 )
	CSelectNearestTarget( )

But it's worthless to use this without using the CamFun.dll because you're not in overview. Put the Camera on super high (enough where you can't see your name anymore) and toggle Macro on.