how to force higher resolution??

[xXxS1kkNastYxXx]

not sure how to do it. but i run a 1280 X 800 or sumthing and archlord only lets me run a 1024 X w/e. so i need help on how to force a higher resolution.

i know my friend use to do that stuff with a .dll but he never taught me n i havnt talked to him in a while.

[Newbb]

Unfortunately, the maximum resolution on an LCD serves a good purpose - if you set it higher, just as with a CRT, there is a possibility of damage to the monitor and almost a guarantee of it not working. LCDs in particular shouldn't be set to anything other than their recommended (normally max. too) resolution because LCDs are digital, and would have to upscale or downscale to get the different resolution to fit onto the existing number of pixels, which invariably results in a loss of quality.

or are u talking about a full-hd screen or something?

[xXxS1kkNastYxXx]

Originally Posted by Newbb

Unfortunately, the maximum resolution on an LCD serves a good purpose - if you set it higher, just as with a CRT, there is a possibility of damage to the monitor and almost a guarantee of it not working. LCDs in particular shouldn't be set to anything other than their recommended (normally max. too) resolution because LCDs are digital, and would have to upscale or downscale to get the different resolution to fit onto the existing number of pixels, which invariably results in a loss of quality.

or are u talking about a full-hd screen or something?

maybe i wasnt clear

archlord highest resolution is 1024 X 768

my screen resolution is a 1280 X 800 or sum **** like that

i want to force archlord to support my screen.

[hexer123]

Originally Posted by james106

not sure how to do it. but i run a 1280 X 800 or sumthing and archlord only lets me run a 1024 X w/e. so i need help on how to force a higher resolution.

i know my friend use to do that stuff with a .dll but he never taught me n i havnt talked to him in a while.

hmm mabe stupid question but had he try change it

in the PatchWindow at Setup ?
(you not had say what you had do)

[Newbb]

ah like that, well i googled it but came up empty..

[hexer123]

in any .ini you can change it too im 100% sure there was

an old toppic about the resolution

[Newbb]

doesnt work most of the time but try:

1. Open the file:

ini\COption.ini

2. go to line

[Patch_Option]
Width=1024
Height=768

and change it to ur monitors res.. are u using widescreen btw?

[xXxS1kkNastYxXx]

Originally Posted by Newbb

doesnt work most of the time but try:

1. Open the file:

ini\COption.ini

2. go to line

[Patch_Option]
Width=1024
Height=768

and change it to ur monitors res.. are u using widescreen btw?

yea widescreen....but shouldnt matter i know a few ppl with widescreen who play andlooks good. but thx for help ill try it out soon n let u know. in middle of farming a neck of surv -_-

and i know about the setup at patcher. that is how i know archlord only runs a 1024 X 768 or w/e

update: doesnt look like it worked...my inventory n storage look fucken huge O_o

update: messing with it. looks ALOT better but for some reason its to tall from top to bottom. gonna try n redit again.

[xXxS1kkNastYxXx]

ok, i now see why u asked if i run widescreen LOL. any ideas for that newbb?

cant see the bottom of my screen. load bar, skill bar , etc on screens

[fragmaster]

My archlord gives option for 1024*1200 / 1280*1024 / 1600*1200

If i select 1600*1200 with window mode ON when i click start i get a "Device Selction" window pop up asking what graphics card i wanna use and what Resolution. (if i dont have windowed selected game launches without asking)

The options i get here are

1280 * 1024 * 32 Window

Then 16 + 32 bit Fullscreen resolutions of
640 * 480
720 * 480
800 * 600
848 * 480
960 * 600
1024 * 768
1088 * 612
1152 * 864
1280 * 720
1280 * 768
1280 * 800 <<
1280 * 960
1080 * 1024
1360 * 768
1600 * 900
1600 * 1024
1600 * 1200

[vektoir02]

ok .

[jofjof]

I'm using native resolution : 1600 x 1200.
When u want to play in Wide i think there is a command to type : /Wide (or someting same).

[xXxS1kkNastYxXx]

Originally Posted by jofjof

I'm using native resolution : 1600 x 1200.
When u want to play in Wide i think there is a command to type : /Wide (or someting same).

that is what the thread i found said. i didnt try it but i may try and reset the options again and try the command.

[Newbb]

here a list of resolutions:
List of 4:3 Monitor Resolutions
Resolution - Aspect ratio
640x480-----4:3
800x600-----4:3
1024x768-----4:3
1152x864-----4:3
1280x960-----4:3
1400x1050-----4:3
1600x1200-----4:3
2048x1536-----4:3
3200x2400-----4:3
4000x3000-----4:3
6400x4800-----4:3

List of 16:9 Widescreen Resolutions
Resolution - Aspect ratio
852x480-----16:9
1280x720-----16:9
1365x768-----16:9
1600x900-----16:9
1920x1080-----16:9

List of 16:10 Widescreen Resolutions
Resolution - Aspect ratio
1440x900-----16:10
1680x1050-----16:10
1920x1200-----16:10
2560x1600-----16:10
3840x2400-----16:10
7680x4800-----16:10

btw, what kind of monitor are u using, and wich ratio does it have?

[Palmatex]

I post a same question in codemasters forum and i got the answer: "Archlord dont support widescreen monitors sorry, but u can try it." lol