what done to paly :D

02/27/2008 17:54 Rukis#1
Quote:
Originally Posted by xenosaga21 View Post
For OFFICIAL USA SERVERS IT IS SIMPLE
Required FILES:
L2 Walker 10.9.0
[Only registered and activated users can see links. Click Here To Register...]
AND ws2_32.dll
[Only registered and activated users can see links. Click Here To Register...]
Optional Downloads
L2Walker SOUND ALERTS Courtesy of Blackartist
[Only registered and activated users can see links. Click Here To Register...]

Place the ws2_32.dll into your L2 Walker 10.9.0 Directory Folder...
Then Edit your Host file located in C:WINDOWSsystem32driversetchosts
Add the Following Line
192.168.1.12 L2authd.Lineage2.com

No Tcp Tunnel / or Loop Back adapter needed Just Launch L2Walker 10.9.0
and it should Verfiy.
If you want to Play on a Different (NON AMERICAN) Server but (STILL OFFICIAL) Ie: Europe . . . You will need to do the same thing as bellow treating it like a private Server .... using the OFFICIAL Ip address of your Choice in the place of XX.XXX.XXX.XXX . . . . .



Now the tricky Part . . . and some explanation to help you understand whats going on . . .
TO GET THIS TO WORK ON A PRIVATE SERVER!!!! it is a Little more Tricky ;)

You Will need Microsoft Loop Back Adapter, installed and configured to 192.168.1.12 . . . and You will need Tcp Tunnel... Let me say why. . .
ws2_32.dll Effectively acts like Tcp Tunnel . . . but it Redirects by default to the standard USA Lineage 2 Auth Server IP Address... I am not yet capable of editing or creating custom ws2_32.dll's to work on private servers. . . if you know how to edit or create your own ws2_32.dll all you would need to do is to change the Usa Ip inside that dll to the one of your private Server.
If you know how to create / edit ws2_32.dll I would love a guide so that I could learn something new. . . But For now I have devised a work around ;)
which simple works be redirecting the information being sent to USA L2AUth to the Private Server of your Choice. . . .

I hope that was clear... was just a simple explanation of what is going on...
NOW to get L2Walker 10.9.0 to work on a private Server.....
You will again NEED
L2WAlker 10.9.0
[Only registered and activated users can see links. Click Here To Register...]
AND ws2_32.dll
[Only registered and activated users can see links. Click Here To Register...]
TCPTUNNEL
[Only registered and activated users can see links. Click Here To Register...]


Step1: Edit Host File to redirect all information to L2walker and your Private server. . . (this assumes that you are playing on a CT1 L2J server that uses a HOST file to connect rather than a patch to the system folder )

add to host file
192.168.1.12 L2authd.lineage2.com
192.168.1.12 L2testauthd.lineage2.com

216.107.242.199 xx.xx.xxx.xxx

EXPLANATION:
192.168.1.12 L2authd.lineage2.com
192.168.1.12 L2testauthd.lineage2.com
Bellow since the DLL file Directs traffic flow to USA OFFICIAL we need to Redirect all Traffic away from USA OFF to YOUR PRIVATE SERVER's IPxxxx..
216.107.242.199 xx.xx.xxx.xxx <-----Insert Private Servers IP....

Now to set up the Microsoft Loop Back adapter....
Bellow an Excerpt from my previous post on How to do that correctly.
Now It is time to setup the Loop Back adapter to grant it the required Ip Address 192.168.1.12 we do this by first (In vista) right click on the Network tray icon , and clicking "Network Sharing Center" Ounce we are there you click on the right side "manage Network Connections" and look for the Microsoft Loop back adapter. . . right click on it and select properties then select Ipv4 and click properties again and enter in the required fields as shown bellow.
Configuring Loop Back adapter Step 1
[Only registered and activated users can see links. Click Here To Register...]
Configuring Loop Back adapter Step 2
[Only registered and activated users can see links. Click Here To Register...]
Configuring Loop Back adapter Step 3
[Only registered and activated users can see links. Click Here To Register...]
Configuring Loop Back adapter Step 4
[Only registered and activated users can see links. Click Here To Register...]
Configuring Loop Back adapter Step 5
[Only registered and activated users can see links. Click Here To Register...]

The Loop Back adapter should Now be Functioning Perfectly. . .


NOW YOU MUST EDIT THE TCPTUNNEL FORWARD.BAT TO FORWARD TO YOUR PRIVATE SERVERS IP.....

Now To Configure TcpTunnel

Open the Included Forward.Bat File and edit it to have Your Private Servers Ip ADDRESS....

tcptunnel --local-port=2106 --remote-host=xxx.xxx.xxx.xxx--remote-port=2106 --stay-alive

xxx.xxx.xxx.xxx = Your Private Servers Ip ADDRESS.
Now Run the forward.bat and Launch L2 Walker....




This Guide Is no where near as clear as my First and I apologize I didn't have much time to prepare it. =/

PS: This should also allow L2Walker IG to WORK... as a byproduct.

IF You want to play without WALKER just run the Forward .bat while playing L2 or edit your host File and put a # symbol in-front of the modifications.


PS: A problem I have had in Other SERVER type operating systems is that IPV6 Causes a conflict in the last option where you select to edit the settings for the loop back adapter i suggest disabling Ipv6 by un-checking it and enabling/disabling the adapter . . . this fixed an issue I had that the device would not become ready . . ..
[Only registered and activated users can see links. Click Here To Register...]
So just go there and uncheck the one that says internet protocol version 6. . . . if its there.


I hope atleast half the people that read this will manage to get it working on first try . . . anyways GOOD LUCK / Have Fun CHeating on worthless Private Servers XD Like ME LOLZ.

Quote:
Originally Posted by xenosaga21 View Post
Removes GameGuard From Ct1 Client
[Only registered and activated users can see links. Click Here To Register...]

Someone scan this / check it . . . its not of my doing but supposedly works to kill gameguard.
Again I can not test cause my Desktop is toast.

Maybe this will Kill GameGuard and allow us to further debug / eliminate problems related to walker Verification.
Atleast this will let us route out GG as the cause.:cool:


Dowload crack -> [Only registered and activated users can see links. Click Here To Register...]

Extract walker
Extract crack in the walker directory
Run xzcrk.exe, run l2walker.exe, login and bot


And

15:04:33 »¶Ó*ĘąÓĂĐĐŐߡŁ
15:04:54 Link LoginServer Succeed.
15:04:58 Login LoginServer Success.
15:04:58 服务器[10]当前在线率:51.77%,能否登陆:能
15:05:01 Link GameServer Succeed.
15:05:07 ->Enter Char[5].
15:05:09 Welcome to the World of Lineage II.
15:05:09 Seven Signs: The quest event period has begun. Speak with a Priest of Dawn or Dusk Priestess if you wish to participate in the event.
15:05:09 SYSTEM : Please be aware of reports of fake PlayNC e-mails.
15:05:09 SYSTEM : PlayNC will never ask for your password.
15:05:09 SYSTEM : Please do not follow links in e-mails to log-in pages.
15:05:09 SYSTEM : Always use your browser to manually access your accounts.
15:05:09 SYSTEM : Please see Lineage II : The Chaotic Chronicle for more details.


my anti vir dont find nothing also i dont use keylogers

ps. sry in topic i want write play but i do many thing computer :D


Also ty xenosaga21 ^^'
02/28/2008 01:30 Rukis#2
Again
01:23:42 ->Login VerifyServer Fail.

What they done know
02/28/2008 01:43 Peanuts#3
Yeah i got the same thing, i was ognna come back here and say that
I was using this solution the whole morning and then i got D/c and....

19:41:01 ->Login VerifyServer Fail.

tough break.
02/28/2008 02:13 Peanuts#4
Oddly enough after i changed my password...it worked again...hmmm?

20:08:22 Link LoginServer Succeed.
20:08:25 Login LoginServer Success.
20:08:25 服务器[06]当前在线率:16.82%,能否登陆:能
20:08:29 Link GameServer Succeed.
20:08:34 ->Enter Char[1].
20:08:37 Welcome to the World of Lineage II.
02/28/2008 02:31 booglexe#5
wait this is confusing. is this a way to make IG walker work? why isn't there so much hype of finally having a solution then?
02/28/2008 02:43 DragoonBlood#6
this WAS the guide for 1.92 IG but it doesnt work u reject
its no longer usible for IG and i dont like using OOG cuz u get stuck all the time x.x and its just stupid
but seriosuly thats the old bypass that no longer works x.x
02/28/2008 02:47 DragoonBlood#7
whao whao whao

Peanuts
after u changed your L2 pass it worked again?
what kind of bs is that O.o
02/28/2008 03:10 Peanuts#8
Yeah it was pretty bogus. I had it running (OOG) for like 5 hours, then it died and wouldnt work and for safety i went to change my pass. Then a buddy of mine said his was workin fine, so i tried it out again and voila...~shrugs~ (im using the VPN method)

21:07:51 542 HP has been restored.
21:07:54 Use Soulshot: B-grade.
21:07:54 Power of the spirits enabled.
02/28/2008 03:30 jagsrocknfl#9
nooo you dont need to change ur pass.. you need to restart the hack and walker... I had the same problem and didn't know why..
02/28/2008 08:08 Rukis#10
01:23:42 ->Login VerifyServer Fail.
08:05:27 »¶Ó*ĘąÓĂĐĐŐߡŁ
08:05:27 Link LoginServer Succeed.
08:05:33 Login LoginServer Success.
08:05:33 服务器[10]当前在线率:46.33%,能否登陆:能
08:05:39 Link GameServer Succeed.
08:05:44 ->Enter Char[5].
08:05:46 Welcome to the World of Lineage II.
08:05:46 Seven Signs: The quest event period has begun. Speak with a Priest of Dawn or Dusk Priestess if you wish to participate in the event.
08:05:46 SYSTEM : Please be aware of reports of fake PlayNC e-mails.
08:05:46 SYSTEM : PlayNC will never ask for your password.
08:05:46 SYSTEM : Please do not follow links in e-mails to log-in pages.
08:05:46 SYSTEM : Always use your browser to manually access your accounts.
08:05:46 SYSTEM : Please see [Only registered and activated users can see links. Click Here To Register...] for more details.
02/28/2008 08:24 Rukis#11
I did change anything maybe the ncsoft do something servers but now all ok
04/22/2008 17:06 Dragonclaw1979#12
Yes this is my first pot but ive been reading everything i can find on walker sice i joined. I played Lineage 2 Retail form open beta up until 1.5 years ago and was an avid Walker user, so you can do with this info as you see fit.

I am currently running a L2J server on an old comp at my home, because my daughter missed playing the game and wanted to play again. I was looking for a working version of walker to use as "Buffbots" for her and myself when we play. I read this post and tried it and what i found was that my server was giving and error that walker was trying to use prot # 831 even though i had it 100% set to 828 in the ini file. I do not however know why this occurs but i thought this info may help some one trying to fix this problem.