[Guide] Most of vsro files problem solved here

badibatu22 · 09/13/2011, 10:43

Quote:

Originally Posted by ByMnkn

sağol dediğim gibi 2gb ram varsa dbden fortess warları ve gerekli görmediğin yerleri disable et ram kalmadığı için sende o hataları veriyor olabilir

ByMnkn · 09/13/2011, 10:45

Quote:

Originally Posted by badibatu22

sağol dediğim gibi 2gb ram varsa dbden fortess warları ve gerekli görmediğin yerleri disable et ram kalmadığı için sende o hataları veriyor olabilir

dün acıldı server yeri geldi hnm kapandı ama simdi acılmıor neden ve nasıl yapıcam o dediğini ?

badibatu22 · 09/13/2011, 10:54

Quote:

Originally Posted by ByMnkn

dün acıldı server yeri geldi hnm kapandı ama simdi acılmıor neden ve nasıl yapıcam o dediğini ?

Quote:
Originally Posted by pushedx
How much ram does your PC have? The next time you open SR_GameServer, start task manager and watch ram usage for the exe. If it goes to 2GB then crashes, it's because you have too many regions enabled for your PC. One way to address that issue is to add the /3GB switch to Windows to allow it to use up to 3GB ram. Alternatively, you will need to disable some regions and try again.

To perform a region reduction test, execute the following query then close and restart SR_ShardManager and SR_GameServer:
Code:
use SRO_VT_SHARD
go
  
update _RefRegionBindAssocServer set AssocServer=2 where AreaName<>'China'
  
exec _LinkRefRegions
Ram usage should be much lower since only Jangan and forts will be loaded. As a consequence though, you'll only be able to spawn characters in Jangan. Any other region will give errors on character selection.

bu yazıyı bir oku işine yarayacaktır

ByMnkn · 09/13/2011, 10:56

Quote:

Originally Posted by badibatu22

bu yazıyı bir oku işine yarayacaktır

ne yapıcam orda? anlamadım s:

3lyka · 09/13/2011, 10:58

English!

#Reported

badibatu22 · 09/13/2011, 10:59

Quote:

Originally Posted by ByMnkn

ne yapıcam orda? anlamadım s:

komutu ne yapacağımı bilmiyorum ama eğer bunu yaparsan sadece ch şehirleri olacak ve ram kullanımı bayaı rahatlayacak.Skyblue ye sor o ne yapacağanı bilir

utku1676 · 09/13/2011, 10:59

ı have this problem , shard and gameserver say , DB Connection Failed !

can anybody help me ? ı will make guide..

ByMnkn · 09/13/2011, 11:01

Quote:

Originally Posted by 3lyka

English!

#Reported

why bro ?

badibatu22 · 09/13/2011, 11:01

Quote:

Originally Posted by utku1676

ı have this problem , shard and gameserver say , DB Connection Failed !

can anybody help me ? ı will make guide..

cert ini de ki configleri doğru ayarladığına dikkat et en ufak hatada veriyor bunu

serverini , db adını şifresini kontrol et

ByMnkn · 09/13/2011, 11:10

badibatu22

onu nasıl yapıcaz anlatırms

jumply111 · 09/13/2011, 11:12

i got this problem: "cannot establish keep alive session" whit ip and bind 0.0.0.0 when i open globalmanager all goes ok but then this **** appears

my db connection is ok
granted firewall ports.

grtz

ByMnkn · 09/13/2011, 11:14

HTML Code:

Originally Posted by pushedx  
How much ram does your PC have? The next time you open SR_GameServer, start task manager and watch ram usage for the exe. If it goes to 2GB then crashes, it's because you have too many regions enabled for your PC. One way to address that issue is to add the /3GB switch to Windows to allow it to use up to 3GB ram. Alternatively, you will need to disable some regions and try again.

To perform a region reduction test, execute the following query then close and restart SR_ShardManager and SR_GameServer:
Code:
use SRO_VT_SHARD
go
  
update _RefRegionBindAssocServer set AssocServer=2 where AreaName<>'China'
  
exec _LinkRefRegions
Ram usage should be much lower since only Jangan and forts will be loaded. As a consequence though, you'll only be able to spawn characters in Jangan. Any other region will give errors on character selection.

help me plz...i don't understand

badibatu22 · 09/13/2011, 11:15

Quote:

Originally Posted by ByMnkn

badibatu22

onu nasıl yapıcaz anlatırms

gerçekten bilmiyorum

Quote:

Originally Posted by jumply111

i got this problem: "cannot establish keep alive session" whit ip and bind 0.0.0.0 when i open globalmanager all goes ok but then this **** appears

my db connection is ok
granted firewall ports.

grtz

same **** here i have this problem too

~~hamada619~~ · 09/13/2011, 11:21

bro when i open global manager and other it show for 5 second and it auto Close

Darkness™ · 09/13/2011, 11:30

Code:

2011-09-13	06:03:12	[SR_ShardManager]	Schedule Manager : g_pServerBodyOfMyself is NULL !!
2011-09-13	06:03:12	[SR_ShardManager]	Schedule Manager : g_pServerBodyOfMyself is NULL !!
2011-09-13	06:03:12	[SR_ShardManager]	Schedule Manager : g_pServerBodyOfMyself is NULL !!
2011-09-13	06:03:12	[SR_ShardManager]	Schedule Manager : g_pServerBodyOfMyself is NULL !!
2011-09-13	06:03:12	[SR_ShardManager]	Schedule Manager : g_pServerBodyOfMyself is NULL !!
2011-09-13	06:03:12	[SR_ShardManager]	Schedule Manager : g_pServerBodyOfMyself is NULL !!
2011-09-13	06:03:12	[SR_ShardManager]	server cord established : 1 (192.168.0.12:32004)
2011-09-13	06:03:13	[SR_ShardManager]	server cord established : 2 (192.168.0.12:49584)
2011-09-13	06:03:19	[SR_ShardManager]	Query Error!!! Query Result : -1, Query : {?=CALL _ExistsServiceOffRentItem}
2011-09-13	06:03:19	[SR_ShardManager]	SQL Error State:42000, Native Error Code: AFC, ODBC Error: [Microsoft][ODBC SQL Server Driver][SQL Server]No se encontr? el procedimiento almacenado '_ExistsServiceOffRentItem'.
2011-09-13	06:03:19	[SR_ShardManager]	{?=CALL _ExistsServiceOffRentItem}
2011-09-13	06:03:20	[SR_ShardManager]	BillingServer is Dead!!

someone know how to set the "billinserver" ?